Canon 5060F Instruction Manual

Canon 5060F - Document Scanner Manual

Get Canon 5060F - Document Scanner PDF manuals and user guides View all Canon 5060F manuals
Add to My Manuals
Save this manual to your list of manuals

Canon 5060F manual content summary:

  • Canon 5060F | Instruction Manual - Page 1
    DOCUMENT SCANNER INSTRUCTIONS Space E FILM F Backup Scanner A Count Only New File Feeding Option Manual Auto Semi-Auto
  • Canon 5060F | Instruction Manual - Page 2
    installed and used in accordance with the instruction manual user will be required to correct the interference at his own expense. Do not make any changes or modifications to the equipment unless otherwise specified in the manual CANON ELECTRONICS INC. All rights reserved. No part Microsoft Windows NTR
  • Canon 5060F | Instruction Manual - Page 3
    Thank you for purchasing the Canon Document Scanner DR-5060F. The DR-5060F high-speed document scanner has a built-in function for backing data to microfilm. In order to fully understand and effectively use the functions of this scanner, be sure to read this manual before use. Also, after you
  • Canon 5060F | Instruction Manual - Page 4
    will find useful information in this manual. This Unit This manual refers to the DR-5060F as "this unit." Scanner This manual refers to the DR-5060F as "the scanner" when the explanation is for the DR-5060F as a scanner. Filmer This manual refers to the DR-5060F as "the filmer" when the explanation
  • Canon 5060F | Instruction Manual - Page 5
    ...8 Chapter 1 About DR-5060F 9 Features of DR-5060F ...10 Packaging: What's in the Box 11 Names and Functions of Parts 12 About the Camera Unit ...18 Chapter 2 Preparation Before Use 19 System Requirements ...20 Connecting to a Computer 21 Connecting the SCSI Cable 21 Setting the SCSI ID and
  • Canon 5060F | Instruction Manual - Page 6
    Chapter 4 Troubleshooting 59 When the Scanner is Not Recognized 60 Removing Paper Jams ...61 Paper Jam in the Paper Eject Section 61 Paper Jam in the Feed Section 63 Removing the Intermediate Unit 66 Attaching the Intermediate Unit 67 Paper Feed Trouble ...68 When the Scanned Image is Not
  • Canon 5060F | Instruction Manual - Page 7
    and electrical shock: WARNING s Never install and operate the unit near flammable substances scanner. s Be sure to connect the ground cable before using the scanner. Also, never connect the ground cable to the power cord from the outlet. Call for service immediately. s Handle the unit with care.
  • Canon 5060F | Instruction Manual - Page 8
    , never block the air vents on the rear of the scanner. s Keep all liquids, beverages, or any type of from the power outlet, and call for service immediately. s Never install the unit in humid or dusty locations. that could become entangled with moving parts, especially the rollers that feed the
  • Canon 5060F | Instruction Manual - Page 9
    is enough space around the scanner as shown in the illustration above. Do not place the unit in the following places. Doing so might cause malfunction or machine trouble, and adversely affect the unit or your personal computer. q Places subject to direct sunlight ¡ If installation in such places is
  • Canon 5060F | Instruction Manual - Page 10
    the area around the power outlet free of obstacles. Carrying When you move the DR-5060F, it should be held by the under section of the main unit by outlet. Also, disconnect the SCSI cable from the connector. Moving the scanner with the power still ON or the SCSI cable still connected might result in
  • Canon 5060F | Instruction Manual - Page 11
    About DR-5060F 1 Chapter 1 About DR-5060F This chapter describes the features of the scanner, what's in the box, and the names and functions of parts on the scanner and the camera unit. Features of DR-5060F 10 Packaging: What's in the Box 11 Names and Functions of Parts 12 About the Camera Unit
  • Canon 5060F | Instruction Manual - Page 12
    DR-5060F The DR-5060F scanner not only processes large volumes of documents at high speed, but also is provided with a function for backing data to microfilm. Here is a summary of the outstanding features of the DR-5060F . q Highly durable The unit features a service life of up to 6 million scans.
  • Canon 5060F | Instruction Manual - Page 13
    CD-ROM DR-5060F DR-5060F Instructions (this manual) Scanning Utility 5060 Instructions ISIS/TWAIN Driver Instructions Removable tray Document eject support plate Power cord (The power cord varies according to country of purchase.) Function key labels Software License Agreement Warranty card
  • Canon 5060F | Instruction Manual - Page 14
    part. Before you connect the DR-5060F, take a few minutes to familiarize yourself with the main parts E FILM F Backup Scanner A Count Only New File Feeding Option Manual Auto Semi-Auto Power switch document tray. Document guide Set the paper guide for the width of the document you are going
  • Canon 5060F | Instruction Manual - Page 15
    Feed Adjustment" P. 36) About DR-5060F Air vent DIP switch This switch is for setting the SCSI ID and terminator. (See "Setting the SCSI ID and Terminator" P. 22) SCSI connectors Connect the SCSI connectors to these connectors. (See "Connecting the SCSI Cable" P. 21) Ground terminal Connect
  • Canon 5060F | Instruction Manual - Page 16
    FILM F Space/Trailer Backup Count Only Scanner A New File Feeding Option Manual Auto Semi-Auto (1) Function keys (2) See "Function Key Settings" P. 52) q Manual Thickness Adjustment q Fixed Thickness Mode q Double user mode. (See "Setting in the User Mode" P. 56) 14 Names and Functions of
  • Canon 5060F | Instruction Manual - Page 17
    the Backup mode and Scanner Only mode, the image to be saved or the new file mark is controlled according to the settings on the application. For details on application settings, refer to the separate "ISIS/TWAIN Driver Instructions" or "Scanning Utility 5060 Instructions." (7) Clear/Stop key This
  • Canon 5060F | Instruction Manual - Page 18
    setup on the application and the scan mode is set to "Black and White". Foe details, refer to the separate "ISIS/TWAIN Driver Instructions" or "Scanning Utility 5060 Instructions." (11) Indicator lamps This indicator lights when setting the brightness, for example, and moves to the left and right as
  • Canon 5060F | Instruction Manual - Page 19
    scanner. (See "Removable tray" P. 36) About DR-5060F s Document eject support plate Install guide labels: These labels are for positioning the document guides. (See "Affixing the Document Guide Labels" P. 33) Function key labels Index labels Document guide labels Names and Functions of Parts
  • Canon 5060F | Instruction Manual - Page 20
    these camera units is used. For details, contact your store of purchase or a Canon service department. q The ID No. of the camera unit can be set within the image of the top side of originals is backed up to film even if the scanner is set for scanning in the duplex mode. To back up both sides of
  • Canon 5060F | Instruction Manual - Page 21
    Chapter 2 Preparation Before Use 2 Preparation Before Use This chapter describes the preparations starting with connecting to a computer through to preparations for scanning. System Requirements 20 Connecting to a Computer 21 Handling the Camera Unit 25 Preparing for Paper Feed and Eject
  • Canon 5060F | Instruction Manual - Page 22
    use the DR-5060F, you need the following items in addition to the standard accessories: • Computer • SCSI card • SCSI cable • Application • Camera unit • Microfilm MEMO q For details on installation of the main unit, see "About the Installation Location" under "Safety Precautions." q The driver may
  • Canon 5060F | Instruction Manual - Page 23
    computer, be sure to turn both the scanner and the computer OFF. 2 Connecting the SCSI Cable Connect your computer to the scanner using the SCSI cable. Two half-pitch 50-pin SCSI connectors are located on the rear of the scanner. Insert the SCSI cable from the computer into one of these connectors
  • Canon 5060F | Instruction Manual - Page 24
    terminator using the DIP switch on the rear of the scanner. The DIP switch is ON at the up position and OFF at the down position. Default (Terminator: OFF, SCSI ID = 2) SCSI ID switch Terminator ON/OFF switch s Setting the SCSI ID Set the SCSI ID by combining the settings of switches SW2 to SW4
  • Canon 5060F | Instruction Manual - Page 25
    s Setting the terminator Set the terminator on the last SCSI device on a daisy chain to ON. Set the terminator DIP switch 1 to
  • Canon 5060F | Instruction Manual - Page 26
    Connecting the Power Cord and Ground Cable Connect the power cord and ground cable. Be sure to use only the power cord and ground cable provided with the scanner. s Connecting the power cord Connect the power cord to the rear of the scanner, and insert the power plug into the power outlet. WARNING
  • Canon 5060F | Instruction Manual - Page 27
    the camera unit, the camera unit holds an empty take-up reel inside. If there is no take-up reel inside the camera unit, contact a Canon service department. 2 Take the microfilm out of its case. Handling the Camera Unit 25
  • Canon 5060F | Instruction Manual - Page 28
    3 Place the film on the shaft on the left with the number "2" written on the reel face up. 4 Pass the film along the film path as shown in the figure below. Film 5 Close the left cover taking care not to nip the film. NOTE To prevent the film from being exposed, be sure to close the left cover when
  • Canon 5060F | Instruction Manual - Page 29
    Preparation Before Use 6 Draw out the film, and insert the tip of the film into the take-up reel with the number "1" written on the reel face up. 2 7 Place the take-up reel on the shaft. 8 Turn the reel a few times in the direction of the arrow, and make sure that the film is firmly taken up on the
  • Canon 5060F | Instruction Manual - Page 30
    9 Close the cover, and make sure that it is locked. Affixing the Index Label Index labels are included among the function key labels that are packaged with the DR-5060F. Affix these index labels at the location specified on the camera unit's cover. 28 Handling the Camera Unit
  • Canon 5060F | Instruction Manual - Page 31
    Loading the Camera Unit in the DR-5060F Load the camera unit loaded with film. 1 Gently insert the camera unit as far as possible into the slot. Space E FILM F Backup Scanner A Count Only New File Feeding Option Manual Auto Semi-Auto 2 Preparation Before Use 2 Push the camera unit down
  • Canon 5060F | Instruction Manual - Page 32
    unit from the main unit. 1 Turn the lock lever to the [OPEN] position to unlock the camera unit. Space E FILM F Backup Scanner A Count Only New File Feeding Option Manual Auto Semi-Auto 2 Lift up the front of the camera unit and gently remove it from the slot. Space E FILM F Backup
  • Canon 5060F | Instruction Manual - Page 33
    to feed the trailer film. The counter display becomes a trailer film display. 1 2 3 4 5 6 2 E FILM F Space/Trailer Backup Count Only Scanner A New File Feeding Option Manual Auto Semi-Auto Space/Trailer key Trailer film display Preparation Before Use NOTE Do not touch the lock
  • Canon 5060F | Instruction Manual - Page 34
    the film to be photographed. (See "Function Key Settings" P.52 ) If the image density cannot be adjusted to a suitable density within the adjustment range, contact a Canon service department. 32 Handling the Camera Unit
  • Canon 5060F | Instruction Manual - Page 35
    are packaged with the DR-5060F. Use document guide labels as aids for adjustment of the document guide. Affix these guide labels on the document tray size of the document to be scanned. Also, attach the document eject support tray and removable tray to accommodate the size and paper quality of the
  • Canon 5060F | Instruction Manual - Page 36
    2 Open the extension wire. s Document eject tray extension Open the document eject tray extension to accommodate the size of the document to be scanned. The document eject tray extension extends in two stages. Pull out the stopper to prevent ejected documents from flying out of the document eject
  • Canon 5060F | Instruction Manual - Page 37
    document eject tray extension 1 from the center of the document eject tray. 2 2 Install the document eject support plate. Install so that the protrusions on the document eject support plate fit into the holes on the document tray guide. MEMO If documents become caught even with the document eject
  • Canon 5060F | Instruction Manual - Page 38
    documents from flying out of the tray when they are ejected from the scanner. MEMO The removable tray is held in place on the document eject tray is in use. 1 Install the removable tray on the center of the eject tray, and adjust the width by the left and right guides. Paper Feed Adjustment Use
  • Canon 5060F | Instruction Manual - Page 39
    unit. Either place a camera unit loaded with film, or change to the Scanner Only mode. NOTE If you hear a strange sound, detect smoke or abnormal switch OFF immediately and disconnect the power cord from the outlet. Call for service immediately. Failure to do so might cause fire. 2 Turn the computer
  • Canon 5060F | Instruction Manual - Page 40
    MEMO If you are using Windows 95/98/Me or Windows 2000, then the first time that you turn on your PC after connecting this scanner to your PC Window's Plug and Play function will automatically display a screen prompting you to install the scanner driver. (The name of this prompt screen varies among
  • Canon 5060F | Instruction Manual - Page 41
    Chapter 3 Preparing Documents This chapter describes precautions regarding documents that can be handled on this scanner, and document feed and scanning operations. About Operation Modes 40 3 About Documents 42 Setting Scan Conditions 44 Preparing Documents 39
  • Canon 5060F | Instruction Manual - Page 42
    , the DR-5060F is used exclusively as a scanner, and images of the scanned document are not backed up to microfilm. s Backup key blinking: Filmer Only mode In this mode, the DR-5060F is used as a rotary filmer. Scan operations from the computer are disabled, and scanning is instructed by selecting
  • Canon 5060F | Instruction Manual - Page 43
    before continuing scanning. (in the Backup mode or Scanner Only mode) q If a paper jam stops : Count Only mode 3 In this mode, the DR-5060F counts the number of originals in the document without ISIS/TWAIN Driver Instructions" or "Scanning Utility 5060 Instructions." About Operation Modes 41
  • Canon 5060F | Instruction Manual - Page 44
    on the document tray. Types of Documents The scanner can accommodate documents of the following width, length and thickness: Width: 55 to 297 mm (2.2 x 11.7 in.) Length: 70 to 432 mm (2.8 x 17.0 in.) Thickness:0.06 to 0.15 mm (0.002 in. to 0.005 in.) (at manual feed: 0.05 to 0.20 mm (0.001 in
  • Canon 5060F | Instruction Manual - Page 45
    q Load documents so that their top edges are inserted as far as possible into the 3 scanner. Feeding Option A Manual Auto Semi-Auto Preparing Documents q Do not load documents beyond the mark on the document tray q Be sure to use both hands when adjusting the document guides. About Documents 43
  • Canon 5060F | Instruction Manual - Page 46
    the User mode" P. 56) MEMO Only some of the scanner conditions are available as functions on the operation panel in the Backup and Scanner Only modes. Details of scan conditions are set on the application. For details, refer to the separate "ISIS/ TWAIN Driver Instructions" or "Scanning Utility 5060
  • Canon 5060F | Instruction Manual - Page 47
    likely to cause double feed. In this mode, you load the document one page at a time. When you select Manual, the document tray rises. In the Backup mode or Scanner Only mode, first instruct start of scanning on the application, and then place the document one sheet at a time on the document tray
  • Canon 5060F | Instruction Manual - Page 48
    the document tray with its top edge inserted first into the scanner. Feeding Option A Manual Auto Semi-Auto 3 Set the document guides for the width of the document you are going to scan. Feeding Option A Manual Auto Semi-Auto 4 Instruct start of scanning in the application. 5 The document tray rises
  • Canon 5060F | Instruction Manual - Page 49
    first into the scanner. Feeding Option A Manual Auto Semi-Auto 3 Set the paper guides for the width of the document you are going 3 to scan. Feeding Option A Manual Auto Semi-Auto Preparing Documents 4 If the scanner is in the Backup mode or Scanner Only mode, instruct start of scanning
  • Canon 5060F | Instruction Manual - Page 50
    the paper guide for the width of the document you are going to scan. Feeding Option A Manual Auto Semi- ISIS/TWAIN Driver Instructions" or "Scanning Utility 5060 Instructions." 4 Load the document face up on the document tray with its top edge inserted first into the scanner. Feeding Option A Manual
  • Canon 5060F | Instruction Manual - Page 51
    to start scanning. If the sensor is obstructed after start of scanning is instructed, the DR-5060F mistakenly judges that a document has been loaded, and the document tray 3 automatically. To end scanning in the Backup mode or Scanner Only mode, press the Clear/Stop key. Setting Scan Conditions 49
  • Canon 5060F | Instruction Manual - Page 52
    the sensor detects the document placed on the document tray. Before you press the Feeding Option key on the operation panel to light [Manual] lamp, set the paper guide for the width of the document you are going to scan. 2 Remove any pages from the document tray, and press the Feeding Option
  • Canon 5060F | Instruction Manual - Page 53
    , refer to the separate "ISIS/TWAIN Driver Instructions" or "Scanning Utility 5060 Instructions." 4 Load one sheet on the document tray up face up with its top edge inserted into the scanner. The document is scanned. Option key and then select any key other than [Manual]. Setting Scan Conditions 51
  • Canon 5060F | Instruction Manual - Page 54
    E FILM F Space/Trailer Backup Count Only Scanner A New File Feeding Option Manual Auto Semi-Auto Function keys The following settings function keys, refer to the separate "ISIS/TWAIN Driver Instructions" or "Scanning Utility 5060 Instructions." q Manual Thickness Adjustment (See P. 53) q
  • Canon 5060F | Instruction Manual - Page 55
    may not function properly when scanning extremely thick or thin paper. If this happens, the user must manually adjust the paper thickness so that documents are fed smoothly through the scanner. The procedure for manually adjusting the paper thickness is as follows: 1 Press the function key to which
  • Canon 5060F | Instruction Manual - Page 56
    paper thickness is set by "Manual Thickness Adjustment" (See "Manual Thickness Adjustment" P. 53). Pressing the lamp OFF. s Double Feed Detection This scanner has a "double feed detection" function. This . Though this function can be set in the driver or the application, the function key does not
  • Canon 5060F | Instruction Manual - Page 57
    imprinter is installed on the scanner, you can developer you are using. For details, contact a Canon service department. Preparing Documents s Odometer Indication If you to 65535, and the odometer level numerical value is held in DR-5060F memory even if the camera unit is replaced or the main
  • Canon 5060F | Instruction Manual - Page 58
    Setting in the User Mode The DR-5060F allows you to select which of the following setup items is used as the user mode. Details are available on how to set the user mode. (See "How to Set the User Mode" P. 58) s User Mode Setup Items Operation panel buzzer setting Sets whether or not to sound the
  • Canon 5060F | Instruction Manual - Page 59
    end detection amount is for when Canon CK III film (5 mm Scanner Only mode enabled (default) MEMO q Setup items U5 to U9 are available only when the corresponding optional device is attached. q For setup items U11 to U14, "-" is displayed at the end of the setting value. (See "How to Set the User
  • Canon 5060F | Instruction Manual - Page 60
    counter display to the counter display. Scanner A 1 Hold down [A] key for at least five seconds. The [A] key blinks, and the user mode appears on the counter display. 2 Select the user mode address using the or key. For setup items U11 to U14
  • Canon 5060F | Instruction Manual - Page 61
    Troubleshooting Chapter 4 Troubleshooting This chapter describes causes of trouble that may occur on the DR-5060F and how to remedy the trouble. When the Scanner is Not Recognized ..... 60 Removing Paper Jams 61 Paper Feed Trouble 68 When the Scanned Image is Not Normal 70 When an Error Code is
  • Canon 5060F | Instruction Manual - Page 62
    the scanner. Remedy the problem by following the remedy for the respective cause. Cause Remedy Cause Remedy Cause Remedy Cause Remedy Cause Remedy Cause Remedy Cause Remedy Cause Remedy The SCSI cable is not correctly connected to the computer. Correctly connect the SCSI cable. The SCSI card
  • Canon 5060F | Instruction Manual - Page 63
    counter display. Follow the procedure below to remove jammed paper from inside the DR-5060F. CAUTION q Be very careful when you remove a paper jam. You eject support plate if they are attached on the document eject tray. Close the document eject tray extension if it is open. 4 Troubleshooting 3
  • Canon 5060F | Instruction Manual - Page 64
    4 Remove the jammed paper from the paper eject section. 5 Press the upper unit down firmly on both sides to close it. If you press the upper unit down on only one side, the opposite side will not be fully closed. Make sure that the upper unit is firmly closed, and that the error code "C01" on the
  • Canon 5060F | Instruction Manual - Page 65
    eject support plate if they are installed on the document eject tray. Close the document eject tray extension if it is open. 3 Press the open/close button, and lift up the upper unit. Lift up the upper unit gently until it comes to a stop. 4 Troubleshooting Space E FILM F Backup Scanner
  • Canon 5060F | Instruction Manual - Page 66
    to a stop. Space Backup ount Only ew File g Option Manual Auto Semi-Auto 6 Remove the jammed paper from the feed section. File tion Manual Auto Semi-Auto 7 To close the feed unit, push the feed unit down. Doing so might damage the scanner. Backup Manual Auto Semi-Auto 64 Removing Paper Jams
  • Canon 5060F | Instruction Manual - Page 67
    Make sure that you hear it click into place. ce Backup ly n Manual Auto Semi-Auto 9 Gently close the upper unit. Space E FILM F Backup Scanner A Count Only New File Feeding Option Manual Auto Semi-Auto 4 Troubleshooting 10 Press the upper unit down firmly on both sides to close it
  • Canon 5060F | Instruction Manual - Page 68
    Removing the Intermediate Unit If small-size documents such as checks are jammed in the intermediate unit, follow the procedure below to remove the unit and remove the jammed paper. 1 Slide the intermediate unit upwards. 2 Pull down the intermediate unit towards you, and remove the upper pin. 3 Lift
  • Canon 5060F | Instruction Manual - Page 69
    off the pins. 4 3 Push the intermediate unit down. MEMO Paper jams may occur if the intermediate unit is not attached properly. Removing Paper Jams 67 Troubleshooting
  • Canon 5060F | Instruction Manual - Page 70
    the Intermediate Unit" P. 67) q Dirty or worn rollers inside the scanner cause paper jams. Clean rollers if dirty (See "Cleaning the Scanning Glasses and Rollers" P. 75). Worn rollers must be replaced. Contact a Canon service department. Condition Cause and remedy The document tray does not rise
  • Canon 5060F | Instruction Manual - Page 71
    again. Condition Cause and remedy When the imprinter is used, the document becomes dirty. This is because ink is sticking to the holes on the guide plate on the inside of the imprinter. Clean these holes with a cotton wool bud. 4 Troubleshooting Paper Feed Trouble 69
  • Canon 5060F | Instruction Manual - Page 72
    application. For details on how to install the driver, see the separate ISIS/ TWAIN Driver Instructions. For details on how to install the application, see the instruction manual for the application in use. Other causes The computer may be correctly recognizing the scanner, and scanning may not be
  • Canon 5060F | Instruction Manual - Page 73
    scanner unit malfunctions or when trouble endorser is installed) Close the Canon service department, 4 and notify them of the error code. Troubleshooting Error code Cause Remedy F01 The camera unit is not inserted. (Backup mode/Filmer mode) Either insert the camera unit, or select the Scanner
  • Canon 5060F | Instruction Manual - Page 74
    is not installed. Install the imprinter scanner, and check which was the last scanned image. Error code Cause Remedy LP The lamp has reached the end of its service life. Contact a Canon service Remedy P00, P01, P02, P04, P06, P10, P20 Scanner paper jam Remove the jammed paper. (See "Paper Jam in
  • Canon 5060F | Instruction Manual - Page 75
    Chapter 5 Daily Cleaning This chapter describes daily cleaning of the scanner. Daily Cleaning 74 5 73 Daily Cleaning
  • Canon 5060F | Instruction Manual - Page 76
    and computer OFF and disconnect the power cord from the power outlet. Failure to do so might cause electrical shock. q Never clean the DR-5060F with any kind of volatile solution such as alcohol, benzene and paint thinner. Doing so might cause fire and electrical shock, or cause the exterior
  • Canon 5060F | Instruction Manual - Page 77
    the removable tray or document eject support plate on the document eject tray if it is installed. Close the document eject tray extension if it is open. 3 Lift up the upper unit. Space E FILM F Backup Scanner A Count Only New File Feeding Option Manual Auto Semi-Auto 4 Use a clean, dry
  • Canon 5060F | Instruction Manual - Page 78
    rollers indicated in the figure below cannot be rotated by hand. If dirty drive rollers are causing dirt to appear on the scanned document, contact a Canon service department. Drive rollers 6 Open the feed unit. Space Backup Count Only New File ng Option
  • Canon 5060F | Instruction Manual - Page 79
    7 Use a clean, dry cloth to wipe the scanning glasses. Scanning glasses are located above and below in the feed unit. Wipe both of these scanning glasses clean. CAUTION Never spray mild detergent or water directly on the scanning glasses. The spray could penetrate below the glass, and contaminate
  • Canon 5060F | Instruction Manual - Page 80
    3. Lower the lever. Backup 1. Fit into the 2. Press this part. deeper of the two grooves. Manual Auto Semi-Auto (A) (B) 9 To close the feed unit, push the to push the feed unit down. Doing so might damage the scanner. Backup Manual Auto Semi-Auto 10 When the feed unit has fallen as far
  • Canon 5060F | Instruction Manual - Page 81
    11 Gently close the upper unit. Space E FILM F Backup Scanner A Count Only New File Feeding Option Manual Auto Semi-Auto 12 When the upper unit has fallen as is the case, replace the rollers. Contact the store of purchase or a Canon service department. Daily Cleaning Daily Cleaning 79
  • Canon 5060F | Instruction Manual - Page 82
    Cleaning the Camera Unit q Wipe the surfaces of the camera unit with a firmly wrung cloth moistened slightly with water or mild detergent. Then wipe off with a clean, dry cloth. q Wipe the camera unit's lens with a soft, clean cloth. CAUTION Take care not to scratch the lens when wiping it. q Remove
  • Canon 5060F | Instruction Manual - Page 83
    Imprinter Guide Plate Ink adhering to the holes on the guide plate on the inside sometimes cause documents to become dirty when the imprinter is used. Clean these holes with a cotton wool bud. 5 Daily Cleaning 81 Daily Cleaning
  • Canon 5060F | Instruction Manual - Page 84
    Scanner> Type Desktop sheet fed type Document size Width: 55 to 297 mm/2.2 x 11.7 in. Length: 70 to 432 mm/2.8 x 17.0 in. Thickness: 0.06 to 0.15 mm (0.002 in. to 0.005 in.) (auto feeding) 0.05 to 0.20 mm (0.001 in. to 0.007 in.) (manual feeding) Document feeding Manual Interface SCSI-II
  • Canon 5060F | Instruction Manual - Page 85
    bar code decoder cannot be mounted at the same time as the patch code/ function sheet detector. For details, contact your store of purchase or a Canon service department. Consumables Microfilm CK III q For details on options and consumables, contact your agent or
  • Canon 5060F | Instruction Manual - Page 86
  • Canon 5060F | Instruction Manual - Page 87
    , CHICHIBU-SHI, SAITAMA 369-1892, JAPAN CANON U.S.A. INC. ONE CANON PLAZA, LAKE SUCCESS, N.Y.11042, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59-61, 1185XB AMSTELVEEN, THE NETHERLANDS CANON LATIN AMERICA, INC. 6505, BLUE LAGOON
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
FILM
E
F
DOCUMENT SCANNER
INSTRUCTIONS