Canon BJC-55 BJC-55 Setup
Canon BJC-55 Manual
 |
View all Canon BJC-55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon BJC-55 manual content summary:
- Canon BJC-55 | BJC-55 Setup - Page 1
BC-10 Black BJ Cartridge BC-11e Color BJ Cartridge BCI-11 Color Ink Tank (for future use) BCI-11 Black Ink Tank (for future use) 2 Prepare the Printer Start Here Easy Setup Instructions 3 Connect the Adapter 4 Install the Canon BJ Cartridge Color Bubble Jet Printer BJC-55 5 Connect to Your - Canon BJC-55 | BJC-55 Setup - Page 2
6 Click Start. (If the Printer Driver button is not red, select Printer Driver, then click Start.) The printer driver will start loading automatically. 6 Install the Printer Driver (Macintosh®) Macintosh 1 Turn on your Mac® and insert the "BJC-55 Setup Software & User's Guide" CD-ROM. NOTE: Screen
-
1 -
2
 |
 |
Color Bubble Jet Printer
BJC-55
Start Here
Easy Setup Instructions
IMPORTANT:
Be sure the printer
is off before continuing, or the
computer will attempt to install
the printer driver before the
printer is ready.
Continue with Step 6
on side two.
Turn OFF your printer.
Connect one end of a USB cable (not
included) to the computer, the other
to the printer.
USB
connection
USB
port
USB
cable
Remove the BC-11e Color BJ Cartridge
from its package.
You MUST remove these protective
materials:
•
Orange cap
•
Orange
tape
Remove
Cap
Remove
Tape
Do Not Touch
these areas
Top Cover
Wait a few moments while the BJ cartridge
and holder move to the left side of the
printer.
Cartridge Holder
moves to the center
Lift the top cover.
Close the top cover and press the
CARTRIDGE button.
Gently press down on the BJ cartridge
until it locks into place.
Cartridge Button
Align the marks on the
BJ cartridge
and the cartridge holder; insert the cartridge
into the holder at a slight angle.
Power Cord
Insert the power cord into the AC Adapter.
NOTE:
The green CHARGE/ERROR light stays on
until the battery pack is completely charged
(approximately 4 to 6 hours).
NOTE:
When the power lock switch is to the
left, you cannot turn the printer on.
Lock Switch
AC Adapter
DC plug
Press the POWER button to turn on the
printer.
Power Button
Plug the DC plug into the right side
of the printer.
Check the power lock switch on the right
side of the printer. Move it to the mark.
Press on the right side of the battery pack
to lock it in place.
Close the front cover.
Align the marks on the printer and
the battery pack. Insert the left end of the
battery pack into the printer at a slight angle.
Open the front cover.
Remove all shipping tape and materials
from the unit.
Front cover
NOTE: You must install the battery pack.
If the
battery pack is not installed when you turn on
the printer, the CHARGE/ERROR lamp will light
orange and the printer will beep six times.
Shipping Tape
NOTE:
Electronic User’s Guide is included on
the CD-ROM.
Carefully remove all items from the box.
Documentation
and Software Kit
Power Cord
AC Adapter
SB-10 Ink Cartridge
Storage Box
Battery Pack
BJC-55 Printer
BC-11e Color
BJ Cartridge
BC-10 Black
BJ Cartridge
BCI-11 Black Ink Tank
(for future use)
BCI-11 Color Ink Tank
(for future use)
1
2
3
4
5
1
3
4
1
2
1
2
3
4
5
6
1
2
2
Prepare the Printer
1
Unpack the Printer
3
Connect the Adapter
4
Install the Canon BJ Cartridge
5
Connect to Your Computer