Canon Color imageCLASS 8180c imageCLASS MF8180c Basic Guide

Canon Color imageCLASS 8180c Manual

Get Canon Color imageCLASS 8180c PDF manuals and user guides View all Canon Color imageCLASS 8180c manuals
Add to My Manuals
Save this manual to your list of manuals

Canon Color imageCLASS 8180c manual content summary:

  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 1
    Basic Guide
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 2
    Color imageCLASS MF8180c Basic Guide
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 3
    and Instructions • Printing and Scanning Instructions • Troubleshooting • Remote User Interface Instructions Facsimile Guide Software Guide CD-ROM Remote UI Guide CD-ROM • Network Connectivity and Setup Instructions Network Guide CD-ROM Model Name • F148800 (Color imageCLASS MF8180c) • The
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 4
    How This Manual Is Organized Chapter 1 Introduction Chapter 2 Paper Handling Chapter 3 Document Handling Chapter 4 Printing from Your Computer Chapter 5 Copying Chapter 6 Scanning Chapter 7 System Monitor Chapter 8 Maintenance Chapter 9 Troubleshooting Chapter 10 Machine Settings Chapter 11 Appendix
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 5
    Support 1-1 Main Components of the Machine 1-2 Operation Panel 1-4 Standby Display 1-5 Energy Saver Mode 1-6 Setting the Energy Saver Mode Manually 1-6 Restoring from the Energy Saver Mode Manually 1-7 Chapter 2 Paper Handling Print Media Requirements 2-1 Storing Paper 2-1 Storing Color
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 6
    Purpose Tray 2-19 Specifying the Paper Size 2-19 Specifying the Paper Type 2-20 Orientation of the Document and the Paper Loading 2-21 Selecting the Paper Output Area 2-22 Paper Type and Paper Output Area 2-22 Face Down Paper Output Area 2-23 Face Up Paper Output Area 2-24 Chapter 3 Document
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 7
    13 Storing Toner Cartridges 8-14 Recycling Used Cartridges 8-15 The Clean Earth Campaign 8-16 THE Canon CARTRIDGE RECYCLING PROGRAM 8-16 U.S.A. PROGRAM 8-17 Packaging 8-17 Shipping 8-19 CANADA PROGRAM-CANADA PROGRAMME 8-20 Replacing the Drum Cartridge 8-22 Replacing the Drum Cartridge 8-22
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 8
    Troubleshooting Clearing Jams 9-1 Paper Jam Inside the Machine 9-2 Paper Jam Behind the Machine 9-9 Paper Jam in the Drum Cartridge 9-21 Removing Jammed Paper from the ADF 9-22 LCD Messages 9-24 Paper Feeding Problems 9-29 Copying Problems 9-32 Print Quality Problems 9-33 Printing Problems
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 9
    Preface Thank you for purchasing Canon Color imageCLASS MF8180c. Please read this manual thoroughly before operating the machine in order to familiarize yourself with its capabilities, and to make the most of its many functions. After reading this manual, store it in a safe place for future
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 10
    Messages Displayed in the LCD The following are a few examples of how messages in the LCD are expressed in this manual. The messages are indicated within angle brackets. • If is displayed, the machine cannot scan the documents. • appears in the LCD. ix
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 11
    Color imageCLASS MF8180c with the instructions, may Connect the equipment into an outlet on a circuit different from that to which the receiver is connected manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 12
    is mandatory for products marketed in the United States. CAUTION Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. The label shown below is attached to the laser scanner assembly within the product. xi
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 13
    printers, facsimiles, and copiers. The standards and logos are uniform among participating nations. Trademarks Canon, the Canon logo, and imageCLASS are trademarks of Canon permission of Canon Inc. Disclaimers The information in this manual is subject to change without notice. Canon INC. MAKES
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 14
    is set forth below. This list is intended to be a guide only. If you are uncertain about the legality of using your product Paper Money • Money Orders • Certificates of Deposit • Postage Stamps (canceled or uncanceled) • Identifying Badges or Insignias • Selective Service or Draft Papers • Checks
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 15
    instructions. Also, since it may result in unexpected accidents or injuries, do not perform any operation unless otherwise specified in the manual power cord from the power outlet. Then, contact Canon Authorized Service Facilities or the Canon Customer Care Center. - Necklaces and other metal
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 16
    this may cause the power cord coating to melt, resulting in a fire or electrical shock. • Do not connect or disconnect the power cord with wet hands, as this may result in electrical shock. • Do not connect the power cord to a multiplug power strip, as this may cause a fire or electrical shock. • Do
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 17
    the power cord when it is connected to a power outlet, unplug conditioner, television or copier. These devices generate instructions in the guides included with your machine. Adjust only those controls that are covered by the instructions in the guides Canon Authorized Service Facilities or the Canon
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 18
    . • Do not drop paper clips, staples, or other contact Canon Authorized Service Facilities or the Canon Customer laser beam cannot escape from the machine during any phase of user operation. Read the following remarks and instructions removed. If the power cord is connected for a long period of time
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 19
    when inspecting the inside of the machine, do not touch the fuser unit and its surroundings, as doing so may result in burns or electrical shock. • When removing jammed paper or replacing the toner cartridge, take care not to allow the toner to come into contact with your hands or clothing, as this
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 20
    • Do not store toner cartridges or copy paper in places exposed to open flames, as this may cause the toner or paper to ignite, resulting in burns or a fire. • When discarding used toner cartridges, put the cartridges in a bag to prevent the toner remaining inside the cartridges from scattering, and
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 21
    main components, the operation panel and the standby display of the machine. It also explains how to set the energy saver function. Customer Support Your machine is designed with the latest technology to provide trouble-free operation. If you encounter a problem with the machine's operation, try to
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 22
    feeder tray Place documents. d Document guides Adjust to the width of document. e Scanning platform Lift it to access inside the machine. f Output tray Outputs printouts. g Cartridge cover Open it when you install drum and toner cartridges, or remove jammed paper. h Front cover Open it when
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 23
    Connect the network cable. LINE EXT. ef e Telephone line jack Connect the telephone line cable. f External device jack Connect an external device. g Lock Release Levers Turn these levers to remove the fuser unit when you are replacing the fuser unit or clearing paper jams from the fuser unit
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 24
    the standby display to the Scan mode. e Alarm indicator Flashes red when the machine has a problem such as a paper jam. (The error message is displayed in the LCD.) f Enlarge/Reduce key Sets an enlargement or reduction ratio of the copy. g Exposure key Adjusts the copy exposure. h Image Quality key
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 25
    standby display in the Copy, Scan or FAX mode is as follows: ■ Copy Mode Copy ratio Paper size Introduction Exposure ■ Scan Mode Image quality Copy quantity ■ Fax Mode Date & time Receive mode Image quality Canon Color imageCLASS MF8180c has various fax features such as Error Correction
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 26
    copy or other functions are operating, or when the Memory indicator lights up - When paper jams occur - When an error code appears and the Alarm indicator flashes - When no paper up the handset of the telephone connected to the machine - When receiving Manually 1 Press [Energy Saver]. The LCD
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 27
    from the energy saver mode, or right after copying finishes, wait about 15 seconds before pressing [Energy Saver]. Restoring from the Energy Saver Mode Manually 1 Press [Energy Saver]. 1 The Energy Saver key goes off and the machine enters the standby mode. NOTE Depending on how long it was
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 28
    come out. Print Media Requirements Storing Paper The quality of paper may deteriorate if it is stored improperly even when the paper meets the normal specifications. Deteriorated paper may cause misfeeds, paper jams, or deterioration in print quality. Observe the following guidelines for storing
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 29
    full-color copier (Do not copy on the reverse side.) • Paper which has been printed on using a thermal transfer printer (Do not copy on the reverse side.) IMPORTANT Never attempt to make copies on full-color transparencies. Doing so may result in machine malfunction. ■ Acceptable Paper Paper Size
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 30
    area for optimum print quality and the entire area where the machine can technically 2 print from your computer. Printing area (light shade): Canon recommends that you print within this area. ■ Paper MAX. 13/64" (5 mm) MAX. 13/64" (5 mm) MAX. 13/64" (5 mm) Feeding direction ■ Envelope
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 31
    care not to cut your hands on the edges of the paper. Paper Handling NOTE The cassette holds up to approximately 250 sheets of 17 lb (60 g/m2) paper. Loading Paper in the Cassette Do not touch the black rubber pad in the paper cassette. It may result in misfeeds. Rubber pad 1 Pull out the
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 32
    lock is released and may result in personal injuries. Lock release lever Lock release lever 3 Hold the lock release lever of the rear paper guide and slide the guide to the mark indicating the subject paper size. The paper size indicated on the paper guide should be aligned with the mark. Loading
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 33
    "" are not used. 4 Adjust both sides of the paper guide to the mark of the desired paper size. When adjusting the paper guides, hold both guides at one time. 2 Set this part to the position of paper size Paper Handling IMPORTANT Align the paper guide with the position shown in the figure ("B5-JIS
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 34
    stack so that the bottom of the page touches the paper guide. Paper limit mark 2 CAUTION When loading paper, be careful not to cut your hands with the edges of the paper. IMPORTANT • Make sure that the paper guide is adjusted to fit the paper size. If it does not fit correctly, it may result in
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 35
    NOTE To print on letterhead paper or paper printed with a logo, load the paper with the print side facing down and the top of the paper to the front of the cassette. ABC 2 Paper feed direction 6 Press down the paper stack so that it is loaded under the hook on the paper guides. Confirm that there is
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 36
    until the front side of the cassette is flush with the front surface of the machine. 2 ● Amount of Paper Remaining in the Cassette The paper cassette has a display indicating the amount of paper remaining in the cassette. If the cassette is full, the indicator will be at the top. The indicator will
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 37
    the multi-purpose tray using the following procedure. 1 Open the multi-purpose tray. Hold the grip at the center of the front surface of the printer. 2 2 Pull out the auxiliary tray. IMPORTANT Be sure to pull out the auxiliary tray when loading paper in the multi-purpose tray. 2-10 Loading
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 38
    Handling 3 Open the extension tray when loading long-size paper such as A4. 2 Closing the Multi-Purpose Tray Close the multi-purpose tray using the following procedure. Keep the multi-purpose tray closed when it is not used. 1 Remove any loaded paper, close the extension tray, and then put the
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 39
    purpose tray when you want to copy or print on the different paper which is in the cassette. 1 Open the multi-purpose tray and pull out the auxiliary tray. For opening the multi-purpose tray, see "Opening the Multi-Purpose Tray," on p. 2-10. 2 2 Spread the paper guides a little wider than the actual
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 40
    capacity: 125 sheets of 17 lb (60g/m2) paper). For more details, see "Acceptable Paper," on p. 2-2. • Confirm that there is sufficient space between the paper limit guides and the paper stack. Take out some paper when there is no space. • Load the paper stack straight. • If the rear edge of the
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 41
    guides are too loose or too tight, it may result in misfeeds or paper jams. • Do not touch the paper in the multi-purpose tray or pull it out while printing. It may result in a faulty operation. Loading Envelopes in the Multi-Purpose Tray Use the multi-purpose tray when you want to copy
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 42
    tray and pull out the auxiliary tray. For opening the multi-purpose tray, see "Opening the Multi-Purpose Tray," on p. 2-10. 2 Spread the paper guides a little wider than the actual envelope width. 2 3 Place the stack of envelopes on a flat surface, flatten them to release any remaining air, and
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 43
    Paper Handling 4 Loosen the hard corners of the envelopes and flatten curls as shown in the figure. 2 5 Align the edges of the envelopes leftward. Be sure to insert the envelopes completely. Be sure that the stack of envelopes is loaded under the paper limit guides. Paper limit guide 2-16 Loading
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 44
    with the edges of the envelopes. IMPORTANT • Up to 10 sheets of envelopes can be loaded. • Confirm that there is sufficient space between the paper limit guides and the envelope stack. Take out some envelopes when there is no space. • The back side (with adhesive surface) of an envelope cannot
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 45
    Handling IMPORTANT • Be sure to align the paper guides with the width of the envelopes. If the guides are too loose or too tight, it may result in misfeeds or paper jams. 2 • Do not touch the envelopes in the multi-purpose tray or pull them out while printing. It may result in a faulty operation
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 46
    ), LGL (Legal), A4, B5, A5, EXECUTIV (Executive), COM10, MONARCH, DL, and ISO-C5. NOTE Select , , , or for envelopes. 6 Press [Stop/Reset] to return to the standby display. Specifying the Paper Size and Type (Common for Cassette and Multi-Purpose Tray) 2-19
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 47
    g/m2 to 163 g/m2)): - Transparency: - Envelope: When you select the in Step 3, either plain paper or heavy paper is selectable. 6 Press [Stop/Reset] to return to the standby display. 2-20 Specifying the Paper Size and Type (Common for Cassette
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 48
    the orientation of the document and the orientation of the paper in the cassette or in the multi-purpose tray are as shown below. ADF Document Platen glass Document 2 Paper Cassette Multipurpose tray Copy Paper Handling Specifying the Paper Size and Type (Common for Cassette and Multi-Purpose
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 49
    IMPORTANT Do not open or close the face up cover while copying and printing. Paper Type and Paper Output Area Select the suitable paper output area depending on the paper type and your purpose. Paper Type Plain Paper Recycled Paper Paper Output Area face up face down face up face down The
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 50
    face up face down 1 sheet 10 sheets face up 1 sheet Envelopes face down 10 sheets 2 Face Down Paper Output Area The paper is delivered with the printed side down on the output tray. Paper is stacked in printed order. Close the face up cover. IMPORTANT • Do not place the delivered
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 51
    is delivered straight through out of the machine. Open the face up cover. • Remove the delivered paper one by one. 2 IMPORTANT • Do not pull the paper forcibly. • This machine has no face up output tray. Remove the delivered paper with your hand. • Do not place an object in front of the face up
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 52
    Photographs Small documents (e.g., index cards) Special types of paper (e.g., tracing paper*1, transparencies*1, etc.) Book ADF Plain paper (multiple page documents of the same size, thickness, and weight or one page documents) Size (W x L) Max. 8 1/2" x 11 3/4" (216 mm x 297 mm) Quantity
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 53
    making copies of a small size document, the copy speed may be slightly slower than usual. Problem Documents • Make sure any glue, ink, or correction fluid on the document is completely dry before placing it on the platen glass or loading it in the ADF. • Remove all fasteners (staples, paper clips
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 54
    Requirements," on p. 3-1.) Placing a Document on the Platen Glass 1 Open the platen glass cover. 3 2 Place your document face down on the platen glass. AB Use the paper size marks on the left side of the platen glass to position a document. • If your document conforms to a standard
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 55
    Document Handling The illustration below shows how to place an LTR-size document on the platen glass. 3 3 Gently lower the platen glass cover. The document is now ready for scanning. Loading Documents in the ADF 1 Fan the
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 56
    2 Adjust the document guides to the width of the document. 3 Load the documents face up of your document have been scanned before starting a new job. • 50 sheets (80 g/m2) or paper stack within 5/16" (8 mm) thickness including curled sheets (guaranteed) (reference at regular ambient temperature and
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 57
    The Paper Path of the ADF Scanning unit 1 2 3 The machine scans documents from the first page. 3 NOTE • When documents are loaded in the ADF, the scanning unit moves to the position shown above and remains there. • When documents are not loaded in the ADF, the scanning unit moves to scan it.
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 58
    the documents from your computer using the printer driver included in the CD-ROM. Before Printing Before printing, software must be installed in your computer. • If not, please refer to the Quick Start Guide or Chapter 1, "Installation," in the Software Guide. Check if the machine is selected as
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 59
    2 Click the corresponding printer driver icon. 3 From the [File] menu, click [Set as Default Printer] (Windows 98/ Me: [Set as Default]). 4 Printing from Your Computer 4-2 Before Printing
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 60
    , select the printer to be used in the [General] tab sheet in the [Print] dialog box, then specify the print settings in the corresponding tab sheet (only for Windows 2000). 6 Specify the required settings ➞ click [OK]. For details on the color printing, refer to the Software Guide. 7 Click [Print
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 61
    ] (Windows 98/Me/2000: [Printers]) folder. ● On Windows XP/Server 2003: ❑ Click [start] on the Windows task bar ➞ select [Printers and Faxes]. ● On Windows 98/Me/2000: ❑ Click [Start] on the Windows task bar ➞ select [Settings] ➞ [Printers]. 4 2 Double-click the corresponding printer driver icon
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 62
    More Information For detailed information on all printing features, refer to Chapter 2, "Printing," in the Software Guide. 4 Printing from Your Computer More Information 4-5
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 63
    the copy sizes. It also describes the special copy features. Documents You Can Copy For information on the types of documents you can copy, their requirements, and details on setting up documents, refer to Chapter 3, "Document Handling." IMPORTANT For better scanning quality for color documents
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 64
    up to 99 copies. 4 Adjust any necessary settings for your document. • Specify the size and the type of the paper you load in the cassette or the multi-purpose tray. (See "Specifying the Paper Size and Type (Common for Cassette and Multi-Purpose Tray)," on p. 2-19.) • Press [Image Quality] to select
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 65
    jam in the ADF. If the paper jam occurs, the LCD displays , or . (See "Removing Jammed Paper from the ADF," on p. 9-22.) IMPORTANT When you make copies immediately after connecting the power cord, the print quality may deteriorate. Make copies after making sure the
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 66
    Set]. 5 You can select from the following: - 200% MAX. Copying - 129% STMT ➞ LTR - 100% - 78% LGL ➞ LTR - 64% - 50% MIN. NOTE • If the setting of menu in the Menu is set to or , the preset copy ratios will be as follows: A: 50%, 70%, 100%, 141% and
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 67
    50% to 200%, selectable in 1% increments. • Even after entering the copy ratio, you can use [((-)] or [)(+)] to adjust the copy ratio. To increase the copy ratio, press [)(+)]. To decrease the copy ratio, press [((-)]. NOTE To return the copy ratio to 100%, press [Enlarge/Reduce] several times to
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 68
    for a document with text or photos. Three modes are available for adjusting the image quality. 1 Press [Image Quality]. 2 Press [Image Quality] repeatedly until the image quality you want 5 appears. Copying You can select from the following: - for text-only documents - for
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 69
    works in black and white copying. The exposure has to be manually adjusted in color copying. Press [Color Start] after setting to the auto mode in order to adjust the exposure for color copying. Adjusting Manually 1 Press [Exposure] to select the manual mode. 2 Press [((-)] or [)(+)] to adjust
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 70
    the level from between 1 and 7. A value of 5 is the default setting. For the toner density indication, 1 is the lightest and 7 is the darkest. Copying NOTE Please refer to the table below when you adjust the color balance setting. When the preview image Change the yellow to lower side, or
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 71
    select ➞ press [Set]. 4 Press [((-)] or [)(+)] to select the appropriate saturation level ➞ press [Set]. You can select from the following: - - - 5 5 Press [Stop/Reset] to return to the standby display. Copying Improving Copied Image 5-9
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 72
    smaller number for a stronger effect. As you select a larger number, the effect becomes less pronounced. Copying 5 Press [Stop/Reset] to return to the standby display. NOTE • It may be unable to erase the background color even if you specify the level according to the step 4 above. • It may be
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 73
    the machine is printing out. Collate Copy The collate copy allows you to sort copies in page order. It is convenient when you make multiple copies of multiple page documents. 5 Copy 1 Copy 2 Copy 3 1 2 3 4 Set 3 sets of copies 1 2 3 4 1 2 3 4 1 2 3 4 When Loading Documents in the ADF
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 74
    . Follow the procedure in "Removing Jammed Paper from the ADF," on p. 9-22 to clear the paper jam in the ADF. If this happens, reduce the documents to be scanned. Or, change the image quality mode to . 5 When Placing a Document on the Platen Glass Copying 1 Place the first page of a document
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 75
    scanned. Or change the image quality mode to . Reserve Copy This feature allows you to copy jobs in memory. 1 Press [Stop/Reset] twice to return to the standby display while the machine is printing out. NOTE It is necessary to return to the standby display in order to reserve the next copy
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 76
    the procedure in "Removing Jammed Paper from the ADF," on p. 9-22 to clear the paper jam in the ADF. All of the scanned documents will be erased if appears, so divide the document and copy each part separately, or select a lower image quality mode and make copies again. 5 5-14 Special
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 77
    Guide. Check if the scanner driver is installed on your computer by following this procedure. 1 Open the [Scanners and Cameras] folder (Windows 98/2000: the [Scanners and Cameras Properties] dialog box). ● On Windows XP: ❑ Click [start] on the Windows task bar ➞ select [Control Panel] ➞ [Printers
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 78
    two methods of scanning documents to your computer: • Using a TWAIN- or WIA- (Windows XP) compliant Windows application • Using [SCAN] on the operation panel of the machine IMPORTANT For better scanning quality for color documents, we recommend that you place documents on the platen glass. If you
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 79
    More Information For detailed information on all scanning features, refer to Chapter 3, "Scanning," in the Software Guide. 6 Scanning More Information 6-3
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 80
    status of the jobs stored in the machine, and to confirm or delete them as needed. Checking the Status of the Jobs Stored in the Machine Use the [Status Monitor] to confirm or delete copy, fax, print and report jobs stored in the machine. When using [Status Monitor], the LCD displays the
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 81
    To cancel deleting the job, press [)(+)] for . Once the job is deleted, the job cannot be restored. 6 Press [Stop/Reset] to return to the standby display. NOTE For detailed information on all fax features, refer to the Facsimile Guide. 7-2 Checking the Status of the Jobs Stored in the Machine
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 82
    [Stop/Reset] to return to the standby display. Confirming and Deleting a Copy Job 7 1 Press [Status Monitor]. 2 Press [((-)] or [)(+)] to select or [)(+)] to confirm the job number, and the quantity of copies. 4 If you want to delete the copy job, press [Set]. 5 If you decide to delete
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 83
    . • The LCD can display characters in ASCII cord. Using characters other than those in ASCII cord may have the LCD display garbled characters. 6 Press [Stop/Reset] to return to the standby display. System Monitor 7-4 Checking the Status of the Jobs Stored in the Machine
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 84
    job, press [((-)] for . NOTE To cancel deleting the job, press [)(+)] for . Once the job is deleted, the job cannot be restored. 7 6 Press [Stop/Reset] to return to the standby display. System Monitor Checking the Status of the Jobs Stored in the Machine 7-5
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 85
    This chapter explains how to clean the machine, replace the toner cartridge, and repack and transport the machine. Periodic Cleaning Your machine the machine's exterior with a clean, soft, lint-free cloth moistened with water or diluted dishwashing detergent solution. Periodic Cleaning 8-1
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 86
    with water, then wipe with a clean, soft, dry, lint-free cloth. Platen glass cover Platen glass Cleaning the ADF Area Maintenance Black lines may appear in copies when the ADF is used to feed documents. This is caused by paste, ink, correction fluid, or other foreign matters in the read area of
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 87
    is what causes black lines on copies. Whenever you load a document in the ADF, always check to make sure that any paste, ink, or correction fluid that is . Print quality deterioration can be prevented by cleaning the fusing roller. First, print out a cleaning page using LTR or A4 size paper. Then,
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 88
    press [Set]. 8 8 Press [((-)] or [)(+)] to select ➞ press [Set]. 9 Press [((-)] or [)(+)] to select ➞ press [Set]. The paper will go into the printer slowly to start cleaning the fusing roller. NOTE It takes approximately 3 minutes to clean the roller. The cleaning
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 89
    toner cartridges (Canon Genuine Cartridges) used in this printer is as follows. The number of the sheets is estimated when printing in the following conditions. • Printing ratio: 5%; Print density: the default; Paper size: Letter or A4; Paper type: Plain paper. Model Name Supported Canon Genuine
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 90
    ➞ press [Set]. 3 Press [((-)] or [)(+)] to select ➞ press [Set]. 4 Press [((-)] or [)(+)] to select the cartridge to be replaced ➞ press [Set]. You can select from the following: - BLACK - CYAN - MAGENTA - YELLOW - ALL COLORS Maintenance 5 Lift the scanning platform a and open
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 91
    open it again when the whirring sound stops. Repeat this process until the cartridge you want to replace is in the correct position. 7 Remove the toner cartridge from the machine. Press and hold the blue buttons on the top of the toner cartridge and lift it straight up. 8 Maintenance Replacing the
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 92
    of the label on the toner cartridge holder, then take out a toner cartridge of the same color from the protective bag. Open the protective bag with scissors, so as not to damage the cartridge. IMPORTANT • Keep the protective bag in which the cartridge came in. It may be required when taking out
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 93
    distributed evenly, it may result in a deterioration of the print quality. Be sure to carry out this procedure properly. • Be sure to shake the toner cartridge gently. Toner may spill if the cartridge is handled without caution. 10 Remove the protective cover. Pull down the tab on the protective
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 94
    from removed. It may be required when taking out the toner cartridge for machine maintenance. 11 Place the toner cartridge on a flat surface, then pull out the sealing tape completely (approx. 17 3/4" (45 cm) in length) while supporting the toner cartridge. Hold the tab on the sealing tape and pull
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 95
    tape remains in the toner cartridge, it may result in a deterioration in print quality. • Dispose of the sealing tape according to local regulations. 12 Press and hold the blue buttons on the top of the toner cartridge and install it in the machine. Keep the guides a, b on both sides aligned
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 96
    a toner cartridge, the print quality may deteriorate. Make copies after making sure the whirring sound stops. • When still appears in the LCD after inserting a cartridge, disconnect and connect the power cord. ∗: indicates either "C", "M", "Y", or "K". NOTE The color labels
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 97
    parts or cause deterioration of the print quality. Please read the following notices before installing or removing the toner cartridges. WARNING Do not burn or throw used toner cartridges into open flames, as this may cause the toner remaining inside the cartridges to ignite resulting in burns or
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 98
    hours in the warm room so that it can adapt to the ambient temperature. • Be sure to use a new toner cartridge within the expiration date indicated on the package. • Using a genuine Canon toner cartridge is recommended. Storing Toner Cartridges Be careful of the following points for storing new
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 99
    of water drops is called condensation. Condensation will adversely affect the quality of the toner cartridge. Recycling Used Cartridges Canon has instituted a worldwide recycling program for cartridges called "The Clean Earth Campaign." This program preserves precious natural resources
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 100
    Becoming a part of this worthwhile program is easy. When your cartridge is of no further use, simply follow the instructions detailed for U.S. or Canadian residents. We appreciate your support of The Canon Cartridge Recycling Program. 8 Working together we can make a significant contribution to
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 101
    Volume Box Return We encourage you to use this option as a more efficient way to ship cartridges. • Place as many cartridges as possible into one box. 8 Carefully seal the box with tape; or • Call 1-800-OK-Canon to receive your free eight cartridge collection box. Maintenance Replacing the
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 102
    the above limits, please call 1-800-OK-Canon for special shipping information. Maintenance Please Note: Do not send defective cartridges for replacement. 8 Defective cartridges under warranty should be exchanged by an authorized dealer or service facility as provided in the warranty. 8-18
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 103
    Canon set up alternative mail service with the U.S. Postal Service. Please call 1-800-OK-Canon to receive U.S. Postal Service merchandise returning label. ■ Option A: UPS Pick-up • Give the shipment to your UPS driver your used cartridge(s) will be forwarded to the Canon Cartridge Collection Center
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 104
    full size street mailbox or take it to your local Canada Post outlet or franchise. Maintenance ■ Option B: Volume Box Return (eight or more cartridges) 8 We encourage you to use this option as a more efficient way to ship cartridges. • Call 1-800-667-2666 to receive your free Canon collection
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 105
    Maintenance Working to preserve endangered species is a long-standing Canon interest. To this end, for every cartridge collected, Canon Canada donates $1, shared equally between World Wildlife Fund Canada and the Nature Conservancy of Canada. This donation is utilized in Canada. • For further
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 106
    printer is as follows. The number of the sheets is estimated when printing in the following conditions. • Printing ratio: 5%; Print density: the default; Paper size: Letter or A4; Paper type: Plain paper. Model Name Supported Canon Genuine Cartridge Print Yield MF8180 EP-87 Drum Cartridge Color
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 107
    the machine must be cleaned when replacing the drum cartridge, therefore, have a soft, dry cloth available. 1 Lift the scanning platform and open the cartridge cover. 8 2 Remove the drum cartridge from the machine. Pull up the green handle on the drum cartridge in the direction of the arrow a, and
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 108
    Maintenance b 3 Use a soft, dry cloth and wipe off chipped paper and toner that are attached on the transparent sheet located at the front of the roller. 8 WARNING Clean the or detergent. • Be careful not to touch unnecessary parts in the machine when cleaning. 8-24 Replacing the Drum Cartridge
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 109
    came in. It may be required when taking out the drum cartridge for machine maintenance. • Print quality may deteriorate if you touch or damage the drum that is set inside. Be careful not to touch the drum or open the drum protective shutter. Be careful not to hold or touch the portions that
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 110
    arrows. b a Remove the packing materials c and d by turning them in the direction of the arrows until they stop and pulling them away. d 8 c 8-26 Replacing the Drum Cartridge
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 111
    the figure. g 8 IMPORTANT • Do not hold or touch the electrical contacts. It may result in damage to the machine. Electrical contacts Electrical contacts Replacing the Drum Cartridge 8-27
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 112
    Do not hold or touch the imaging transfer belt. The image quality may deteriorate. Do not apply shock to the drum cartridge memory or bring it near magnetic waves. It may result in damage to the machine. Drum cartridge memory Imaging transfer belt • After removing the packing materials, install the
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 113
    Maintenance Lock the drum cartridge by pushing it down toward you b. b IMPORTANT Lock the drum cartridge securely so that it may be in the state shown in the figure. 8 7 Close the cartridge cover and lower the scanning platform. Replacing the Drum Cartridge 8-29
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 114
    the drum cartridge, the print quality may deteriorate. Make copies after making sure the whirring sound stops. • When still appears in the LCD after inserting the cartridge, disconnect and connect the power cord. Precautions for Handling the Drum Cartridge A drum cartridge consists
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 115
    touch the imaging transfer belt. The image quality may deteriorate. Do not apply shock to the drum cartridge memory or bring it near magnetic waves. It may result in damage to the machine. Drum cartridge memory Imaging transfer belt • When handling a drum cartridge, hold it properly as shown in the
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 116
    drum cartridge from the protective bag until it is ready to be used. • If a drum cartridge cartridge in a place exposed to direct sunlight. • Do not store a cartridge condensation) • Do not store a cartridge in a place that can generate of dust. • Store the cartridge out of the reach of cartridge due
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 117
    not follow these precautions, the machine may be damaged or the quality of your printouts may be adversely affected. 1 Disconnect the printer cable and/or network. 2 Lift the scanning platform. 3 Open the cartridge cover. 4 Remove a toner cartridge from the machine. In order to avoid direct sunlight
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 118
    Maintenance Carrying the Machine by the Sides Detach the document feeder tray. Grip the handles on both sides of the machine and lift it carefully, as shown in the illustration above. CAUTION When carrying the machine, be sure to hold it in the designated places as shown in the illustration.
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 119
    you cannot solve the problem by yourself. Clearing Jams This section describes how to remove jammed paper. When print media jams inside the machine, the LCD displays and repeatedly. CAUTION There are some areas inside the machine and cartridge which are subject
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 120
    REC. PAPER JAM> and appear in the LCD, remove the paper in the following procedure. 1 If paper is jammed in the output tray, remove the jammed paper. Troubleshooting 2 If paper is jammed in the multi-purpose tray, remove the jammed paper. 9 IMPORTANT If the jammed paper cannot
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 121
    3 Pull out the paper cassette. 4 Remove the jammed paper. IMPORTANT If the jammed paper cannot be removed easily, proceed to the next step. Do not try to remove it forcefully. 5 Insert the cassette in the machine. 9 Troubleshooting Clearing Jams 9-3
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 122
    a and open the cartridge cover until it is locked b when the whirring sound stops. a b 7 Remove the drum cartridge from the machine. Pull up the green handle on the drum cartridge in the direction of the arrow a, and lift the cartridge straight up b. a 9 b Troubleshooting 9-4 Clearing Jams
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 123
    do not try to pull the paper out forcefully but see "Paper Jam in the Drum Cartridge," on p. 9-21. Troubleshooting IMPORTANT • Print quality may deteriorate if you touch or damage the drum that is set inside. Be careful not to touch the drum or open the drum's protective shutter. Be careful not to
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 124
    the drum cartridge memory or bring it near magnetic waves. It may result in damage to the machine. Drum cartridge memory Imaging transfer belt 8 Place the drum cartridge in the protective bag. 9 Press the green lock release lever a and remove the jammed paper b. 9 b a Troubleshooting 9-6 Clearing
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 125
    bag. Troubleshooting 11 Hold the drum cartridge with both hands and install it in the machine. Position the triangular mark on the drum cartridge with the triangular mark on the machine and install the drum cartridge a. 9 Lock the drum cartridge by pushing it down toward you b. b Clearing Jams
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 126
    Lock the drum cartridge securely so that it may be in the state shown in the figure. Troubleshooting 12 Close the cartridge cover and lower the scanning platform. 9 If the message is still displayed after closing the cartridge cover, pieces of torn paper may still be remaining inside. Re-check the
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 127
    procedure. CAUTION The fuser unit and its surroundings inside the machine may become hot during use. When replacing fuser unit, do not touch the fuser unit and its surroundings, as doing so may result in burns or electrical shock. 1 Open the face up cover. 9 Troubleshooting Clearing Jams 9-9
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 128
    2 Tilt both the green pressure release lever on the left and right side of the fuser unit towards you to release the pressure in the fuser unit. 3 Remove the jammed paper. Troubleshooting 9 4 Lift the scanning platform a and open the cartridge cover b. a b 9-10 Clearing Jams
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 129
    green handle on the drum cartridge in the direction of the arrow a, and lift the cartridge straight up b. a b If paper is jammed in the removed drum cartridge, do not try to pull the paper out forcefully but see "Paper Jam in the Drum Cartridge," on p. 9-21. 9 Troubleshooting Clearing Jams 9-11
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 130
    Troubleshooting IMPORTANT • Print quality may deteriorate if you touch or damage the drum that is set inside. Be careful not to touch the drum or open the drum . Drum protective shutter Sensors • Do not expose the drum cartridge to quality may deteriorate. Do not apply shock to the drum cartridge
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 131
    8 to Step 10 and start with Step 11 ( ➞ p. 9-16) to remove the jammed paper. In doing so, never close the cartridge cover. It may result in paper jams that are difficult to clear. Follow Step 8 to Step 10 to set the drum cartridge after removing the paper. Troubleshooting Clearing Jams 9-13
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 132
    Troubleshooting 8 Take the drum cartridge out of the protective bag. 9 Hold the drum cartridge with both hands and install it in the machine. Position the triangular mark on the drum cartridge with the triangular mark on the machine and install the drum cartridge a. 9 Lock the drum cartridge by
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 133
    Troubleshooting IMPORTANT Lock the drum cartridge securely so that it may be in the state shown in the figure. 10 Close the cartridge cover and lower the scanning platform. 9 If the message is still displayed after closing the cartridge cover and lowering the scanning platform, proceed to the
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 134
    Troubleshooting 11 If the paper jam message is still displayed, unplug the power cord from the wall outlet. CAUTION The fuser unit and the surrounding area can become extremely hot during operation. Perform the following procedure after the fuser unit has cooled down completely. Touching the fuser
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 135
    13 Close the face up cover. 14 Turn the lock release levers located on the back of the machine in the direction of the arrow and release the lock. 15 Hold the grip on the fuser unit and remove it. 9 Troubleshooting Clearing Jams 9-17
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 136
    unit. Dropping the unit may result in personal injuries. Heavier on the back side 16 Open the sub-output tray. Troubleshooting 17 Tilt both the green pressure release lever on the left and right side 9 of the fuser unit towards you to release the pressure in the fuser unit. 9-18 Clearing Jams
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 137
    Troubleshooting 18 Remove the jammed paper. IMPORTANT If the paper completely winds around the fusing roller and is impossible to be removed, contact your Canon dealer. 19 Return the green pressure release levers on the fuser unit to their original positions. 9 20 Close the sub-output tray.
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 138
    21 Hold the grip on the fuser unit and install it securely. 22 Lock the fuser unit by turning the two lock release levers in the direction of the arrow. Troubleshooting 9 23 Connect the power cord and all interface cables. 24 Plug the power cord in the wall outlet to turn on the machine. If the
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 139
    Troubleshooting Paper Jam in the Drum Cartridge When the paper is jammed in the drum cartridge as shown in the figure, remove the jammed paper using the following procedure. 1 Turn the knob on the drum cartridge in the direction of the arrow. 9 2 Lift the cover a and remove the jammed paper b. a b
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 140
    Troubleshooting IMPORTANT Do not touch the imaging transfer belt. The image quality may deteriorate. Imaging transfer belt 3 Return the cover to its original position a and turn the knob in the direction of the arrow b. b a Proceed to the next steps to remove the jammed paper. When removing paper
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 141
    by the guides. Open the ADF and gently remove the jammed paper from the ADF. Troubleshooting 3 Open the ADF and gently remove the jammed paper from the document output tray. 9 NOTE After removing jammed paper, even edges of the document before loading it in the ADF again. Clearing Jams 9-23
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 142
    .) till the working sound of the main unit stops. Scanning cannot be performed for a while immediately after the power cable is connected. Troubleshooting CHECK DOCUMENT Cause 1 There is a paper jam in the ADF. Remedy Remove the document you are trying to copy in the ADF. (See "Removing Jammed
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 143
    CHECK PRINTER Cause 1 A problem has occurred in the machine. Remedy Reset the machine by opening the cartridge cover and then closing it. If the message persists, unplug the machine from the power supply and contact Canon Authorized Service Facilities or the Canon Customer Care Center. Cause 2 A
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 144
    "K". Troubleshooting PREPARE NEW DRUM Cause The drum cartridge need to be replaced soon. Remedy Prepare a new drum cartridge to be replaced. 9 PRINT NOT GUARANTEED CHECK ∗ CARTRIDGE Cause Remedy The installed toner cartridge cannot guarantee the print quality. Cartridges that have low toner or
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 145
    connect it again, or unplug the machine and plug it in again to clear the error message. REC. PAPER JAM Cause There is a paper jam. Remedy Clear the paper jam (See "Clearing Jams," on p. 9-1.) and reload paper in the cassette or multi-purpose tray. Then reset the machine by opening the cartridge
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 146
    Canon Authorized Service Facilities or the Canon Customer Care Center. ** xxx stands for a number. SYSTEM ERROR E078 Cause Remedy The drum cartridge is not installed correctly. Install the drum cartridge correctly, and then unplug and plug the power cord again. Troubleshooting SYSTEM ERROR E197
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 147
    is clear. Multiple sheets feed into the machine at the same time. Q Is paper loaded correctly? A Make sure the paper stack in the cassette or multi-purpose tray is loaded properly, and that the paper guides are adjusted correctly. (See "Loading Paper," on p. 2-4.) Paper Feeding Problems 9-29
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 148
    for color copiers. They will cause a paper jam. Please use transparencies recommended by Canon. Paper feeds curled. Q Is the proper paper loaded? A Check if the proper paper is loaded in the cassette or multi-purpose tray. (See Chapter 2, "Paper Handling.") 9-30 Paper Feeding Problems
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 149
    Troubleshooting Paper stacked roughly. Q Is the proper paper loaded? A Check if the proper paper is loaded in the cassette or multi-purpose tray. (See Chapter 2, "Paper Handling.") A Check if the appropriate paper type is selected in in of the Menu. (See "
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 150
    tape from the cartridge. (Refer to the Quick Start Guide.) Q Is the cassette inserted completely into the machine? A Insert the cassette as far as it will go. (Refer to the Quick Start Guide.) Q Did you connect the power cord to the machine just now? Troubleshooting A Wait for a while
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 151
    Print Quality Problems Troubleshooting The print quality is not what you expect; print is not clear, has missing dots or white streaks. Q Are the size, thickness and type of the paper you are using within the specifications of the machine? A Check that the paper you are using is supported by
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 152
    20.) Troubleshooting The edges of copies are dirty when you make copies. Q Is the paper size set correctly? 9 A Specify the appropriate paper size in in of the Menu. (See "Specifying the Paper Size," on p. 2-19.) Images in which two or more colors are overlaid
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 153
    . Fill-patterns are not printed in accurate color (specified color). Q Are the fill-pattern of the print data and the dither pattern of the printer interfering with one another? A Do not specify a fill-pattern in the application and print again. Troubleshooting Print Quality Problems 9-35
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 154
    Manual Color Settings] in the [Quality] sheet and clicking [Color Settings]. A Adjust [Gamma] in the printer driver. Specify [Gamma] in the [Matching] sheet by checking [Manual Color Settings] in the [Quality] sheet and clicking [Color Settings]. Troubleshooting 9 9-36 Print Quality Problems
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 155
    . If the problem is fixed, the Alarm indicator will turn off, and the LCD will return to the standby mode. If the Alarm indicator remains flash, unplug the machine, and contact Canon Authorized Service Facilities or the Canon Customer Care Center. Printout does not match paper size. Q Is the
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 156
    Make sure the ADF is closed. Q Is the USB cable connected securely? A Check that the USB cable is connected securely to the machine and your computer. Disconnect the USB cable, and reconnect it correctly after a while. Troubleshooting Scanned images are dirty. Q Is the platen glass or the
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 157
    contact Canon Authorized Service Facilities or the Canon Customer Care Center. Q Does the Energy Saver key go off? A When the Energy Saver key lights up, the energy saver mode activates. To restore the machine from the energy saver mode, press [Energy Saver]. Troubleshooting General Problems
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 158
    machine yourself may void the limited warranty. If you need to contact Canon Authorized Service Facilities or the Canon Customer Care Center, make sure you have the following information: • Product name Canon Color imageCLASS MF8180c • Serial number The serial number is on the label located at the
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 159
    "Menu Descriptions," on p. 10-2. • If you press [Stop/Reset] before [Set] is pressed, the item you have selected will not be registered. • Press [Stop/Reset] to exit from the Menu. • If you press [Menu], to Chapter 8, "Machine Settings," in the Facsimile Guide. Accessing the Machine Settings 10-1
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 160
    . PLAIN PAPER, HEAVY PAPER, TRANSPARENCY (The factory default setting is in bold face.) Name 1. DEFAULT SETTINGS COPY FAX Descriptions Selects the Copy, or Scan mode for the machine's default mode. When the power cord is plugged in, or after the auto clear function activates, the standby display
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 161
    not sound. The transmission end tone sounds. 1 to 3 (1) Sets the reception end tone settings. The reception end tone sounds only when any error occurs while printing. 1 to 3 (1) The reception end tone does not sound. Machine Settings The reception end tone sounds. 1 to 3 (1) Sets the printing
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 162
    of printing quality. Read the each description carefully before specifying this option. Note: After correcting problems, reset to the default setting: . The special print mode function is turned off. It is not recommended to print on the reverse of paper that has been printed once. However
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 163
    the result. Note Do not select when using thin paper. It may cause a problem such as winding around the fuser unit. Before selecting , try printing when is selected for . If the print result is not satisfactory yet, select
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 164
    The auto sort function is turned on. The paper size group can be selected. If the paper size group is changed, the preset copy ratios will also change. Preset copy ratios: 50%, 64%, 78%, 100%, 129%, 200% Preset copy ratios: 50%, 70%, 100%, 141%, 200% Preset copy ratios: 50%, 70%, 81%, 86%, 100%, 115
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 165
    BACKGROUND PRINTER SETTINGS Name 1. ERROR TIME OUT ON OFF Descriptions Specify the toner density for the following each color when using color mode. clear, select a larger value. When you make copies of photographs, select a smaller value. 1 to 9 (5) Selects the saturation type when using color
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 166
    Settings TIMER SETTINGS Name 1. DATE/TIME SETTING 2. DATE SETUP 3. AUTO CLEAR ON OFF 4. ENERGY SAVER ON 1. ENERGY SVR TIME time, the display returns to the standby mode. Sets the time until the machine returns to the standby mode. 1MIN. to 9MIN. (1MIN.) The auto clear function is turned off. Sets
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 167
    2. AUTO GRAD. ADJUST 3. ROLLER CLEANING 1. START CLEANING 2. CLEAN PAPER PRT Descriptions Selects the toner cartridge to be removed. Selects the color to be removed. 1. BLACK 2. CYAN 3. MAGENTA 4. YELLOW 5. ALL COLORS Sets automatic gradation adjustment. Cleans the fusing roller. Starts cleaning of
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 168
    Tones Acceptable Documents Acceptable Copy Stock Copy Sizes Personal Desktop Stationary Organic Photosensitive Conductor Indirect Electrostatic Transfer System Toner Projection System Canon's RAPID Fusing System™ Platen glass: Approx. 600 × 600 dpi (monochrome/color) ADF: Approx. 600 dpi
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 169
    (36 kg)(excluding cartridges) 11 Lifetime of Fuser Unit Approx. 50,000 sheets for paper size A4 Features are subject to change without notice due to product improvements. For high-quality copies, we recommended using paper and transparencies recommended by Canon. Some types of paper available at
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 170
    CARTRIDGE settings, 10-9 CHECK PAPER SIZE message, 9-24 CHECK PRINTER COVER message, 9-25 CHECK PRINTER message, 9-25 Cleaning ADF Area, 8-2 machine's exterior, 8-1 periodic, 8-1 scanning area, 8-2 Collate copy, 5-11 key, 1-4 Color Start key, 1-4 COMMON SETTINGS settings, 10-2 COPY key, 1-4 COPY
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 171
    Document feed ADF, 3-4 platen glass, 3-3 Drum Cartridge Precautions for Handling the Drum Cartridge, 8-30 Replacement, 8-22 Storing a Drum Cartridge, 8-32 I Image Quality adjusting, 5-6 key, 1-4 In Use/Memory indicator, 1-4 INSERT ∗ CARTRIDGE, 8-12, 9-25 INSERT DRUM, 8-30, 9-25 Appendix E Energy
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 172
    media requirements, 2-1 size, 2-2 type, 2-2 weight, 2-2 Print quality problems, 9-33 PRINTER DATA ERROR message, 9-27 Printing areas, 2-3 before Printing, 4-1 canceling, 4-4 documents, 4-3 problems, 9-37 Problems cannot solve, 9-40 copying, 9-32 document, 3-2 general, 9-39 paper feeding, 9-29 print
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 173
    STANDARD COPY QTY setting, 10-6 STANDARD EXPOSURE setting, 10-6 Standby display, 1-5 Status Monitor key, 1-4 using, 7-1 STD ZOOM RATIO settings, 10-6 STD. IMAGEQUALITY setting, 10-6 Stop/Reset key, 1-4 SUPPLY REC. PAPER message, 9-27 System monitor, 7-1 11 T Telephone line jack, 1-3 Toner Cartridge
  • Canon Color imageCLASS 8180c | imageCLASS MF8180c Basic Guide - Page 174
    & IMAGE FRANCE S.A.S. 12, rue de l'Industrie 92414 Courbevoie Cedex, France CANON (U.K.) LTD. Woodhatch, Reigate, Surrey, RH2 8BF, United Kingdom CANON DEUTSCHLAND GmbH Europark Fichtenhain A10, 47807 Krefeld, Germany CANON ITALIA S.p.A. Via Milano, 8 20097 San Donato Milanese (MI) Italy
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
Basic Guide