Canon DR-3080CII User Manual - Page 60

The PC was turned on before the scanner. - troubleshooting

Get Canon DR-3080CII PDF manuals and user guides View all Canon DR-3080CII manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

Cause Action Cause Action Cause Action Cause Action Cause Action The scanner's SCSI ID is identical to the SCSI ID of another device. Check the SCSI IDs of all SCSI devices connected to the system and set a unique SCSI ID for the scanner. The terminator is not set correctly. Shut down both the PC and the scanner, and then turn the scanner on first, and then the PC. The PC was turned on before the scanner. Shut down both the PC and the scanner, and then turn the scanner on first, and then the PC. The scanner is not on. Refer to the previous section, "The scanner does not turn on," and check to see if the scanner is on. If the scanner is not on, shut down the PC, then turn the scanner on first, and then the PC. The SCSI board is not compatible with the scanner. Use a recommended SCSI board. (See "SCSI Boards" on p.18) 58 Troubleshooting

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
58
Troubleshooting
Cause
The scanner’s SCSI ID is identical to the SCSI ID of
another device.
Action
Check the SCSI IDs of all SCSI devices connected to the system
and set a unique SCSI ID for the scanner.
Cause
The terminator is not set correctly.
Action
Shut down both the PC and the scanner, and then turn the scanner
on first, and then the PC.
Cause
The PC was turned on before the scanner.
Action
Shut down both the PC and the scanner, and then turn the scanner
on first, and then the PC.
Cause
The scanner is not on.
Action
Refer to the previous section, “The scanner does not turn on,”
and check to see if the scanner is on. If the scanner is not on, shut
down the PC, then turn the scanner on first, and then the PC.
Cause
The SCSI board is not compatible with the scanner.
Action
Use a recommended SCSI board. (See “SCSI Boards” on p.18)