Canon DR 5020 Instruction Manual

Canon DR 5020 - Document Scanner Manual

Get Canon DR 5020 - Document Scanner PDF manuals and user guides
UPC - 030275656367
View all Canon DR 5020 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon DR 5020 manual content summary:

  • Canon DR 5020 | Instruction Manual - Page 1
    DOCUMENT SCANNER INSTRUCTIONS ENGLISH Be sure to thoroughly read this Instructions before using this unit, and store this manual in a safe place after use.
  • Canon DR 5020 | Instruction Manual - Page 2
    . No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior permission of CANON
  • Canon DR 5020 | Instruction Manual - Page 3
    Thank you purchasing the Canon Document Scanner DR-5020/5080C. In all, three manuals are provided with the DR-5020/5080C: DR-5020/5080C Instructions (this manual), Scanning Utility 5000 Instructions and ISIS/TWAIN Driver Instructions. This manual describes handling of the scanner, for example, how
  • Canon DR 5020 | Instruction Manual - Page 4
    in parentheses refers to a page number that contains more information about the previous sentence or paragraph. HINT Tips about operations and how to avoid minor difficulties. I This Unit This manual refers to the DR-5020 and DR-5080C collectively as the "scanner." If a description is required
  • Canon DR 5020 | Instruction Manual - Page 5
    CONVENTIONS 2 Safety Precautions 6 Chapter 1 About DR-5020/5080C 11 1.1 Features of DR-5020/5080C 12 1.2 Packaging: What's in the Box 14 1.3 Part Names 15 N Front view 15 N Rear view 16 N Operation panel 17 N Removable tray 20 N Document eject support plate 20 N Function key labels 20
  • Canon DR 5020 | Instruction Manual - Page 6
    How to Set the User mode 65 Chapter 4 Troubleshooting 67 4.1 When The Scanner Is Not Recognized 68 4.2 Removing Paper Jams 70 Paper Jam in the Paper Feed Unit 70 Paper Jam in Paper Exit Section 73 4.3 Paper Feed Trouble 75 4.4 When The Scanned Image is Not Normal 77 4.5 When An Error Code
  • Canon DR 5020 | Instruction Manual - Page 7
    Appendix 88 N DR-5020/5080C Scan Mode Tables 88 DR-5020/5080C Specifications 90 Options ...92 Index ...93 5
  • Canon DR 5020 | Instruction Manual - Page 8
    Maintenance source. I Use only the power cord and plug provided with the scanner. I Never attempt to disassemble or modify the unit. I Never use OFF immediately and disconnect the power cord from the outlet. Call for service immediately. I Handle the unit with care. Avoid shocks and vibrations
  • Canon DR 5020 | Instruction Manual - Page 9
    from the power outlet and call for service immediately. I Never install the unit with moving parts, especially the rollers that feed the document or removing a paper jam. You may be injured unexpectedly. For example, the paper edges may cut your fingers. I Do not open the top unit while the scanner
  • Canon DR 5020 | Instruction Manual - Page 10
    document tray extension, extention wire open) More than 630 mm (24.8 in.) For operation, maintenance and ventilation, make sure that there is enough space around the scanner Condensation occurring inside the unit may impair scan image quality. Place the scanner in a room that is well within
  • Canon DR 5020 | Instruction Manual - Page 11
    of obstacles. Carrying When you move the DR-5020/5080C, hold it firmly with both hands as scanner, always turn the power switch OFF and disconnect the power cord from the power outlet. Also, disconnect the SCSI cable from the connector. Moving the scanner with the power still ON or the SCSI cable
  • Canon DR 5020 | Instruction Manual - Page 12
    Chapter 1 About DR-5020/5080C This chapter describes the features of the scanner, what's in the box, and the names and functions of parts on the scanner. 1.1 Features of DR-5020/5080C 12 1.2 Packaging: What's in the Box? ........ 14 1.3 Part Names 15
  • Canon DR 5020 | Instruction Manual - Page 13
    Chapter 1 About DR-5020/5080C Features of DR-5020/5080C The DR-5020/5080C are versatile document image scanners with high speed scanning performance. Both units deliver excellent black-and-white image data. The DR-5080C also includes features for color and grayscale scanning needs. Here is a summary
  • Canon DR 5020 | Instruction Manual - Page 14
    added on depending on the scanning mode. Also, not all modes are supported depending on the application and scanner driver in use. For more details, thoroughly read the instruction manuals for the application and scanner driver in use. G Drop-out color (DR-5080C) This function disables drop-out
  • Canon DR 5020 | Instruction Manual - Page 15
    purchase. DR-5020/5080C Setup CD-ROM Scanning Utility 5000 and ISIS/TWAIN Driver Instructions DR-5020/5080C Instructions Scanning Utility 5000 Instructions ISIS/TWAIN Driver Instructions Function sheets Warranty card*2 Function key labels 14 Removable tray Document eject support plate Power
  • Canon DR 5020 | Instruction Manual - Page 16
    functions of each part. Before you connect the DR-5020/5080C, take a few minutes to familiarize yourself with the main parts. N Front view Imprinter cover Open out this cover when you are adjusting the print position of the optional imprinter. Document eject tray After a document is scanned, it is
  • Canon DR 5020 | Instruction Manual - Page 17
    Chapter 1 About DR-5020/5080C N Rear view Air vent DIP switch This switch is for setting the SCSI ID and turning the terminator ON or OFF. (P.25) Power cord connector Connect the power cord provided with the scanner to this connector. SCSI connectors Connect the SCSI connectors to these connectors
  • Canon DR 5020 | Instruction Manual - Page 18
    Operation panel 1 2 3 4 (1)Function keys (P. 60) 1.3 Part Names 1 (2)Simplex/Duplex key (3)Mode Selection keys (4)Brightness keys key Selects whether to scan only one side of the document or both sides. Simplex: Light to scan only side of the document. Duplex: Light to scan both sides of the
  • Canon DR 5020 | Instruction Manual - Page 19
    DR-5020/5080C (3)Mode Selection key Select the document scanning mode. ("Black and white/Black and white error diffusion") Text: This is lighting, when scanning the text documents (including mostly characters) with black and white mode. Picture: This is lighting, when scanning the picture documents
  • Canon DR 5020 | Instruction Manual - Page 20
    When you press this key, it will light. If you load the document and press the Start key in this state, the document will be fed and the scanner will count the number of pages. (The document will not be scanned.) The document page count is displayed on the counter display. (8)New File key Press
  • Canon DR 5020 | Instruction Manual - Page 21
    DR-5020/5080C N Removable tray This tray can be installed on the document eject tray to prevent short-length documents from flying out of the tray when they are ejected from the scanner. N Document eject support plate Install this plate when scanning large-size (e.g. A3/11" x 17") thin documents
  • Canon DR 5020 | Instruction Manual - Page 22
    Chapter 2 Preparation Before Use This chapter describes the procedure from scanner connection through to turning the power ON. 2.1 System Requirements 22 2.2 Installation and Connection 23 2.3 Preparing for Paper Feed and Eject ..27 2.4 Turning the Power ON/OFF 33
  • Canon DR 5020 | Instruction Manual - Page 23
    Chapter 2 Preparation Before Use System Requirements To use the DR-5020/5080C, you need the following items in addition to the standard accessories: G Computer G SCSI card G SCSI cable G Application MEMO • The driver may not function properly depending on the application you are using. • Select a
  • Canon DR 5020 | Instruction Manual - Page 24
    Installation and Connection This section describes scanner installation and connection. For details on the scanner installation location, see "About the Installation Location" in the Safety Precautions (P.8). MEMO 2 Carrying When you move the DR-5020/5080C, hold it firmly with both hands
  • Canon DR 5020 | Instruction Manual - Page 25
    HINT The following items are also needed when you connect the scanner: G SCSI card Check that the SCSI card is installed on your computer. Use a SCSI card that is compatible with the driver application you are using. G SCSI cable The scanner's SCSI connector is a D-sub half-pitch 50-pin (pin type
  • Canon DR 5020 | Instruction Manual - Page 26
    are assigned for hard disks. Set the terminator on the last SCSI device on a daisy chain to ON. Set the terminator
  • Canon DR 5020 | Instruction Manual - Page 27
    . • Use only the power cord and plug provided with the scanner. • Before you connect the power cord, be sure to turn scanner into an outlet shared with another device. If you use an extension cable, pay attention to the total amperage of the cable. Connect the power cord to the rear of the scanner
  • Canon DR 5020 | Instruction Manual - Page 28
    for aiding adjustment of the document guide. 2 Preparing the Document Tray Extension and Document Eject Tray Extension Use the document tray extension and document eject tray extension to accommodate the size of the document to be scanned. The document eject support plate and removable tray can
  • Canon DR 5020 | Instruction Manual - Page 29
    Chapter 2 Preparation Before Use 2 Gently open the wire extension. MEMO The wire extension is used when scanning documents larger than A4 or LTR. 28
  • Canon DR 5020 | Instruction Manual - Page 30
    tray extension to accommodate the size of the document to be scanned. The document eject tray extension opens out in three stages to accommodate different types and sizes of document. 1 Pick up eject tray extension 1 from the center of the document eject tray. 2 2 Draw out eject tray extension
  • Canon DR 5020 | Instruction Manual - Page 31
    Chapter 2 Preparation Before Use N Document eject support plate Install this plate when scanning large-size documents or documents with a slippery surface. When such documents are ejected from the scanner, they may become caught on the document eject section and become curled, or cause a paper jam.
  • Canon DR 5020 | Instruction Manual - Page 32
    when you are scanning small-size documents. This tray prevents documents from flying out of the tray when they are ejected from the scanner. 1 Install the document. MEMO Close the eject tray if it is open. 2 Set the left and right paper guides for the width of the document you are going to scan.
  • Canon DR 5020 | Instruction Manual - Page 33
    (||) position and to the right (|||) position if it is more slippery. Affixing the Document Guide Labels The scanner package contains function key labels and document guide labels. These labels aid adjustment of the document guide. Affix them on the document tray as shown in the figure below. 32
  • Canon DR 5020 | Instruction Manual - Page 34
    up. HINT • If you are using Windows 95/98/Me or Windows 2000/Windows XP, then the first time that you turn on your PC after connecting this scanner to your PC Windows' Plug and Play function will automatically display a screen prompting you to install the scanner driver. (The name of this prompt
  • Canon DR 5020 | Instruction Manual - Page 35
    indicate a problem with the scanner. Simply click on the "X" to close the message window. • The driver application provided with the scanner must be installed to use the scanner. For details, refer to the separate "ISIS/TWAIN Driver Instructions" or "Scanning Utility 5000 Instructions." Turning the
  • Canon DR 5020 | Instruction Manual - Page 36
    Chapter 3 Preparing Documents This chapter describes precautions regarding documents that can be handled on this scanner and document feed and scanning operations. 3.1 About Documents 36 3.2 Document Feeding and Scanning .....38 3.3 Setting Scan Conditions 58
  • Canon DR 5020 | Instruction Manual - Page 37
    Chapter 3 Preparing Documents About Documents The DR-5020/5080C can feed a wide variety of document sizes. The ranges of width and length for a document as follows: Width : 55 to 297 mm (2.2 to 11.7 in.) (The actual maximum scanning width is 295 mm/11.6 in..) Length : 70 to 432 mm (2.8 to 17
  • Canon DR 5020 | Instruction Manual - Page 38
    3.1 About Documents MEMO • Documents comprising pages of differing thickness and size may cause a malfunction during feeding. • Heavily curled documents or wrinkled or creased paper may cause double feed. • Documents containing text or pictures within 5 mm (0.2 in.) of its edges or documents with
  • Canon DR 5020 | Instruction Manual - Page 39
    the following items: • Scan procedure (according to feed mode) • Counting of pages in documents • Control Sheets CAUTION • Avoid wearing loose fitting clothing, dangling jewelry, long ties, or even long hair that could become entangled with moving parts, especially the rollers that feed the unit
  • Canon DR 5020 | Instruction Manual - Page 40
    the document after instructing scanning in the application. When the scanner has finished scanning a stack of documents, load the next stack. The scanner automatically continues scanning. G Manual In this mode, you load the document one page at a time after you have instructed start of scanning on
  • Canon DR 5020 | Instruction Manual - Page 41
    New File Count Only Simplex/Duplex [Simplex]: Select this when scanning only one side of the document. [Duplex]: Select this when scanning both sides of the document. Brightness keys Set the brightness when the document is scanned. To automatically adjust the brightness, press A key to light
  • Canon DR 5020 | Instruction Manual - Page 42
    Feeding and scanning 3 Fan a group of pages to be scanned until the edges are even. 4 Load the document face up with the top edge of the document inserted first into the scanner. 3 MEMO • When you load the document on the document tray, load the document with its top side face up. • The weight
  • Canon DR 5020 | Instruction Manual - Page 43
    Preparing Documents 5 Set the paper guides for the width of the document you are going to scan. 6 Instruct scanning in the application. 7 The document tray rises, and scanning begins. When scanning of all pages in the document ends, the paper tray is lowered. If paper feed stops during scanning due
  • Canon DR 5020 | Instruction Manual - Page 44
    New File Count Only Simplex/Duplex [Simplex]: Select this when scanning only one side of the document. [Duplex]: Select this when scanning both sides of the document. Brightness keys Set the brightness when the document is scanned. To automatically adjust the brightness, press A key to light
  • Canon DR 5020 | Instruction Manual - Page 45
    Chapter 3 Preparing Documents 3 Fan a group of pages to be scanned until the edges are even. 4 Load the document face up with the top edge of the document inserted first into the scanner. MEMO • When you load the document on the document tray, load the document with its top side face up. • The
  • Canon DR 5020 | Instruction Manual - Page 46
    5 Set the paper guides for the width of the document you are going to scan. 6 Instruct scanning in the application. The Start key changes color from red to green. 3 7 Press the Start key. 8 The document tray rises, and scanning begins. When scanning of all pages in the document ends, the paper
  • Canon DR 5020 | Instruction Manual - Page 47
    New File Count Only Simplex/Duplex [Simplex]: Select this when scanning only one side of the document. [Duplex]: Select this when scanning both sides of the document. Brightness keys Set the brightness when the document is scanned. To automatically adjust the brightness, press A key to light
  • Canon DR 5020 | Instruction Manual - Page 48
    you have instructed scanning in the application, the scanner erroneously judges that a document has been loaded, and the document tray starts to move. Make sure that objects other than the document do not cover the sensor on the document tray. Sensor 5 Fan a group of pages to be scanned until the
  • Canon DR 5020 | Instruction Manual - Page 49
    tray from rising. Reduce the number of document sheets loaded on the document tray and scan the document again. HINT To avoid paper jams, check the load limit mark on the document tray. The stack should not be above this mark ( ). The load limit is about 500 pages of standard A4/LTR size paper (80
  • Canon DR 5020 | Instruction Manual - Page 50
    to a system error or paper jam, make sure that the last page of the original that was being fed in was recorded properly before continuing scanning. 8 If there are more pages in the document to scan, load the document, and scanning begins automatically. To end scanning, press the Stop key. 3 49
  • Canon DR 5020 | Instruction Manual - Page 51
    that are not fed well (e.g. paper quality that is more likely to cause double feed). In this mode, you load the document one page at a time. 1 Press the Feeding Option key on the operation panel to light [Manual]. Feeding Option key The document tray rises. Take care not to nip your fingers in the
  • Canon DR 5020 | Instruction Manual - Page 52
    display above the key and adjust the brightness. For details on other setup parameters, see "3.3 Setting Scan Conditions." (P.58) MEMO 3 3 Load one page of the document you are going to scan, and set the paper guides for the width of the document. 4 Instruct scanning in the application. 51
  • Canon DR 5020 | Instruction Manual - Page 53
    one sheet face up with the top inserted into the scanner. The document is scanned. 6 Insert the document one page at a time. 7 To end scanning, press the Stop key. HINT The document tray remains at the raised position. To return the document tray to its original position, press the Feeding Option
  • Canon DR 5020 | Instruction Manual - Page 54
    panel of the scanner. The Count Only key lamp lights to indicate the Count Only mode. The Semi-Auto lamp also lights. Count Only key 3 2 Load the document on the document tray and press the Start key. Counter display The document is fed and the number of pages in the document appears on the
  • Canon DR 5020 | Instruction Manual - Page 55
    for at least two seconds. Stop key HINT You can use the above count to conduct a verify scan (automatically verify the number of pages in the document during scanning). For details on verify scan, refer to the separate ISIS/TWAIN Driver Instructions or Scanning Utility 5000 Instructions . 54
  • Canon DR 5020 | Instruction Manual - Page 56
    • This function is valid only when the scanner application supports scanning using Function Sheets. Set the scanner application beforehand so that this function can be used on the application. For details, refer to the Scanner Application Instructions. • For details on Function Sheets, refer to
  • Canon DR 5020 | Instruction Manual - Page 57
    come with the DR-5020/5080C. G Scanner Control Sheets These sheets control the mode in which the document is scanned. The following Control Sheets for each of the scan modes are provided. For Duplex mode Tells the scanner to scan and store contents of front and back of the page. Insert this Function
  • Canon DR 5020 | Instruction Manual - Page 58
    in any way. In particular, prevent dirt within 51 mm (2 in.) of the top edge of the sheet. Marked or stained Function Sheets can cause scanning errors. • Documents may not be scanned correctly if the density during scanning by Function Sheets is set too high or too low. 3 57
  • Canon DR 5020 | Instruction Manual - Page 59
    following describes each of these setting methods. MEMO Only some of the available scan conditions are set on the operation panel. More detailed settings are set in the application. For details, refer to the separate "ISIS/ TWAIN Driver Instructions" or "Scanning Utility 5000 Instructions." 58
  • Canon DR 5020 | Instruction Manual - Page 60
    when the scanner receives a scan start instruction from the computer. Semi-Auto: The scanner feeds the document when you press the Start key after loading the document. Auto: The scanner automatically feeds the document when you load the document. Manual: Manually load the document one sheet
  • Canon DR 5020 | Instruction Manual - Page 61
    be restored to the scanner simply by pressing a function key. Functions are registered to function keys in the application. For details on how to register settings to function keys, refer to the "ISIS/TWAIN Driver Instructions" or "Scanning Utility 5000 Instructions". MEMO • Default settings are
  • Canon DR 5020 | Instruction Manual - Page 62
    . This function, however, may not function properly when scanning extremely thick or thin paper. If this happens, the user must manually adjust the paper thickness so that documents are fed smoothly through the scanner. The procedure for manually adjusting the paper thickness is as follows: 1 Press
  • Canon DR 5020 | Instruction Manual - Page 63
    , press the function key to which the imprinter is registered, and scan the document with the key lamp lit. To disable use of the imprinter, scan the document with the key lamp out. N Fixed Thickness Mode ON/OFF This scanner is initially set to automatically detect the paper thickness before
  • Canon DR 5020 | Instruction Manual - Page 64
    is registered, and scan the document with the key lamp driver or the application, the function key does not light in this case. The function key lights when detection of double feed by both document length and thickness are both set. • The double feed detection settings are cleared from scanner
  • Canon DR 5020 | Instruction Manual - Page 65
    Chapter 3 Preparing Documents Setting in the User Mode The DR-5020/5080C allows you to select which operation mode (user mode) is used for each of the items below. (Settings U5 to U9 are available only when
  • Canon DR 5020 | Instruction Manual - Page 66
    N How to Set the User mode 1 Hold down key for at least five seconds. A 3.3 Setting Scan Conditions The blinks, and the user mode appears on the counter display. 2 Select the user mode address (one of U1 to U9) using the or
  • Canon DR 5020 | Instruction Manual - Page 67
    Chapter 4 Troubleshooting This chapter describes causes of trouble that may occur on the DR-5020/5080C and how to remedy the trouble. 4.1 When The Scanner Is Not Recognized 68 4.2 Removing Paper Jams 70 4.3 Paper Feed Trouble 75 4.4 When The Scanned Image is Not Normal 77 4.5 When An Error Code
  • Canon DR 5020 | Instruction Manual - Page 68
    4 Troubleshooting When The Scanner Is Not Recognized The following describes possible causes of your computer not recognizing the scanner. Remedy the problem by following the remedy for the respective cause. Cause Scanner is not correctly connected. Remedy Connect the scanner to the SCSI card
  • Canon DR 5020 | Instruction Manual - Page 69
    from the scanner or the AC power outlet. Turn the computer OFF, and correctly connect the scanner's power cord. Then, turn the scanner ON and then turn the computer ON again. Cause The scanner does not support this SCSI card. Remedy Replace with a SCSI card compatible with the driver application
  • Canon DR 5020 | Instruction Manual - Page 70
    Chapter 4 Troubleshooting Removing Paper Jams Paper may have jammed if scanning stops midway or "PXX" appears on the counter display. Follow the procedure below to remove jammed paper from inside the DR-5020/ 5080C. CAUTION • Be very careful when you remove a paper jam. You may be injured
  • Canon DR 5020 | Instruction Manual - Page 71
    open/close button, and lift up the upper unit until it stops and is held at that position. 4 Remove the jammed paper from inside the scanner. 4 5 To close the upper unit, push the upper unit inwards as far as possible, and then release the upper unit. When you release the upper
  • Canon DR 5020 | Instruction Manual - Page 72
    Chapter 4 Troubleshooting 6 When the upper unit has fallen as far as it can go, press down firmly on both sides to close it. If you press the upper unit down only on one side, the opposite side will not be full closed. Make sure that you hear it click into place. 72
  • Canon DR 5020 | Instruction Manual - Page 73
    Jams Paper Jam in Paper Exit Section 1 Remove the jammed paper from the document tray or the document eject tray. 2 Remove the removable tray or document eject support plate if they are installed on the document tray. Close the document eject tray extension if it is open. 3 Open the upper unit
  • Canon DR 5020 | Instruction Manual - Page 74
    Chapter 4 Troubleshooting 4 Remove any jammed paper from the exit section. 5 Press the upper unit down firmly on both sides to close it. If you press the upper unit down only on one side, the opposite side will not be full closed. Make sure that you hear it click into place. 74
  • Canon DR 5020 | Instruction Manual - Page 75
    paper feed adjustment lever to adjust paper feed. Condition • Dirty or worn rollers inside the scanner cause paper jams. Clean rollers if dirty. (P.83) Worn rollers must be replaced. Contact a Canon service department. The document tray does not rise and clicks into place. 4 Cause and remedy
  • Canon DR 5020 | Instruction Manual - Page 76
    on different paper, provide a wider margin around the document (or lighten the background), and scan the document again. When the document becomes dirty (with imprinter installed). This is because ink is sticking to the holes on the guide plate on the inside of the imprinter. Clean these holes
  • Canon DR 5020 | Instruction Manual - Page 77
    . This error message is sometimes no longer output by turning asynchronous transfer in the scanner's user mode OFF (P.64). If this does not rectify the problem, contact the computer or SCSI card manufacturer. If the above remedies do not rectify the problem, contact a Canon service department. 77
  • Canon DR 5020 | Instruction Manual - Page 78
    Chapter 4 Troubleshooting When An Error Code is Displayed When the scanner unit malfunctions or when trouble such as a d03 Two or more document pages were scanned. Press the Stop key to reset the counter to "0". Check the document with the scanned image, and scan the document again. Error code
  • Canon DR 5020 | Instruction Manual - Page 79
    must be added on to use an extra function. Contact the store of purchase or a Canon service department. For details on additional memory requirements when extra functions are set, see "DR-5020/ 4 5080C Scan Mode Tables." (P.88) Error code Cause Remedy L02 Too much data. Ran out of memory
  • Canon DR 5020 | Instruction Manual - Page 80
    Troubleshooting Error code Cause Remedy U02 Number of scanned document sheets is less than the set number of sheets in the verify scan. Two or more sheets may have been fed when the document is scanned. Press the Stop key to reset the counter to "0". Check the number of scanned P20 Scanner paper
  • Canon DR 5020 | Instruction Manual - Page 81
    Chapter 5 Daily Cleaning This chapter describes daily cleaning of the scanner. 5.1 Daily Cleaning 82
  • Canon DR 5020 | Instruction Manual - Page 82
    Chapter 5 Daily Cleaning Daily Cleaning To ensure high-quality image scanning, regularly clean your DR-5020/5080C as described below. CAUTION • Before you clean the scanner, turn the scanner and computer power OFF and disconnect the power cord from the power outlet. Failure to do so might cause
  • Canon DR 5020 | Instruction Manual - Page 83
    on scanned documents is dirt on the scanning glasses or rollers. Clean scanning glasses and rollers regularly. 1 Press the power switch to turn the scanner OFF, and unplug the power cord from the power outlet. 2 Remove the removable tray or document eject support plate on the document eject
  • Canon DR 5020 | Instruction Manual - Page 84
    Chapter 5 Daily Cleaning 4 Use a clean, soft cloth to wipe the scanning glasses. Be sure to clean both scanning glasses, the one below and one above. CAUTION Never spray mild detergent or water directly on the scanning glasses. The spray could penetrate below the glass and contaminate the internal
  • Canon DR 5020 | Instruction Manual - Page 85
    the deeper 2. Press this part. of the two grooves. A B • If a roller becomes loose (Figure A), re-attach it as shown in Figure B. • Before you return the upper unit to its original position, be sure to lower the lever on the feed unit (Figure B). If the document is scanned with the lever at
  • Canon DR 5020 | Instruction Manual - Page 86
    the upper unit down. Doing so might damage the scanner. 8 When the upper unit has fallen as document pages) occurs frequently in spite of your having cleaned the rollers, a probable cause is roller friction. If this is the case, replace the rollers. Contact the store of purchase or a Canon service
  • Canon DR 5020 | Instruction Manual - Page 87
    cause fire or electric shock. We recommend periodically cleaning the power plug. Imprinter Dirt may stick to scanned documents when the imprinter is in use. This is because ink is sticking to the holes on the guide plate on the inside of the imprinter. Clean these holes with a cotton wool bud. 5 87
  • Canon DR 5020 | Instruction Manual - Page 88
    DR-5020/5080C Scan Mode Tables Error messages are sometimes displayed as some scan modes are not supported on the scanner due to memory restrictions. If this happens, add on optional memory (DR-5080C only) referring to the table below. MEMO • Scanning is not possible when the width of the document
  • Canon DR 5020 | Instruction Manual - Page 89
    128 MB of memory on DR-5080C (option) O: Supported X: Not supported Scan mode Resolution (H x V) Duplex 200ʷ200 400ʷ400 300ʷ300 24-bit 300ʷ150 240ʷ240 200ʷ200 DR-5020 O: Supported X: Not supported Scan mode Resolution Duplex Simplex (H x V) A3 A4 B4 LDR LGL LTR A3
  • Canon DR 5020 | Instruction Manual - Page 90
    DR-5020/5080C Specifications DR-5020 DR-5080C Type Desktop sheet fed type Document size Width: 55 to 295 mm/2.2 x 11.6 in. Length: 70 to 432 mm/2.8 x 17.0 in. Thickness: 0.06 to 0.15 mm (Auto feeding) 0.06 to 0.2 mm (Manual feeding) *The maximum document 10 dpi steps Scanning speed (max.)
  • Canon DR 5020 | Instruction Manual - Page 91
    Weight Power requirement Power consumption Noise Operating environment Approx. 20 kg (44.2 lb) AC 220-240V (50/60 Hz), 0.6A (max) AC 120V (60 Hz), 1A (max) 120 W (max) Less than 70 dB Temperature: 10°C to 32.5°C (50°F to 90.5°F) Humidity: 20% to 80% RH (with imprinter in use 30% to 80% RH)
  • Canon DR 5020 | Instruction Manual - Page 92
    by adding optional memory on the scanner, refer to Appendix, DR-5020/5080C Scan Mode Tables (P.88). Prints characters such as numbers, alphabet characters and symbols on the front side of the document after it is scanned. Reads and recognizes bar codes in the document. Stamps an 8-digit number and
  • Canon DR 5020 | Instruction Manual - Page 93
    labels 20 Function keys 17, 60 - C - Carrying the scanner 9, 23 - I - Cleaning 82 Imprinter ...... 60, 62, 64, 78, 79, 87, 92 - Main unit 82 Installation Location 8 - Scanning Glasses and Rollers ... 83 Connecting the SCSI cable 24 - J - Connecting the power cord 26 Job Separation
  • Canon DR 5020 | Instruction Manual - Page 94
    paper jam 70 Restore Memorized Setting 63 - S - Safety Precautions 6 SCSI connectors 16, 24 SCSI ID 25, 68 SCSI synchronization 64 Scan Mode Tables 88 Scan Procedure 39 Scanner control sheets 56 Semi Auto mode 43 Sensor 47 Setting Scan Conditions 58 Setting in the User Mode 64 Setting
  • Canon DR 5020 | Instruction Manual - Page 95
    INC. 1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN CANON U.S.A. INC. ONE CANON PLAZA, LAKE SUCCESS, N.Y.11042, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180 EG AMSTELVEEN, THE NETHERLANDS
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
ENGLISH
Be sure to thoroughly read this Instructions before using this unit,
and store this manual in a safe place after use.
DOCUMENT SCANNER
INSTRUCTIONS