Canon EOS-1Ds EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2.
Canon EOS-1Ds Manual
UPC - 013803079265
View all Canon EOS-1Ds manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon EOS-1Ds manual content summary:
- Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 1
- Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 2
SOFTWARE. No updates, fixes or support will be made available for the SOFTWARE. 4. LIMITED WARRANTY AND LIMITATION OF LIABILITY: It is your responsibility to choose, maintain and match the hardware and software components of your computer system. Thus Canon does not guarantee uninterrupted service - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 3
OR INCIDENTAL LOSS OR DAMAGE INCLUDING LOSS OF PROFITS, EXPENSE OR INCONVENIENCE HOWSOEVER CAUSED OR ARISING OUT OF THE SOFTWARE OR THE USE THEREOF. NEITHER CANON, NOR ANY OF CANON'S SUBSIDIARIES, DISTRIBUTORS OR DEALERS SHALL HAVE ANY OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT BROUGHT BY - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 4
in the camera's Instruction Manual. O For the restrictions that apply to the software products, refer also to the Readme files for the respective products. O In order to transfer images from the EOS Viewer Utility, you will need retouching (image editing) software. In order to start the TWAIN Driver - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 5
EOS DIGITAL Solution Disk EOS Viewer Utility O Dedicated software for an EOS DIGITAL camera to be used for downloading and displaying images, processing RAW images, specifying the camera settings such as personal functions. O Can be used for downloading images saved on the memory card in the camera - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 6
up the EOS Capture (W-88, M-88) Open the Camera Settings window (W-56, M-56) Edit/Display the images (W-20 to 44, M-20 to 44) Shoot remotely and download the images (W-90, M-90) Specify the camera settings (W-57 to 86, M-57 to 86) O In addition, you can use the WIA Driver or TWAIN Driver (W-97 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 7
Images with the Driver W-97 Describes how to download JPEG images using the WIA Drivers for Windows XP or Windows Me, and the TWAIN Drivers for Windows 2000 or Windows 98 SE. 7 Troubleshooting and Uninstallation W-103 Provides a troubleshooting and describes the software uninstallation procedures - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 8
or more EOS Capture: 600 MB or more WIA Driver: 25 MB or more TWAIN Driver: 25 MB or more PhotoStitch: 40 MB or more Display Screen resolution: 1024 by 768 pixels or more Color quality: Medium (16 bit) or more O Depending on your computer system, this software may not run correctly on Windows 98 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 9
Installing the Software W This chapter describes how to install the bundled software. If you were unable to successfully install the software using the procedure given in 1 this manual, see "Troubleshooting" (W-104). Installing the Software W-4 Correct Installation Procedure W-4 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 10
the camera to your computer before installing the software, see "Troubleshooting" (W-107). 1 Start up your computer. O Exit any programs that are running. 2 Insert the CD (EOS DIGITAL Solution Disk). ¿ The Installer panel appears. 3 Click the [Install] button. ¿ The [Preparing to Install] window - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 11
5 Select [Easy Installation] and click the [Next] button. 1 Installing the Software 6 Check the details of the License Agreement and then click the [Yes] button. 7 Check the software and the folder in which the software will be installed, and then click the [Next] button. ¿ Installation begins - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 12
] button. 9 Click the [Exit] button. 10Remove the CD. ¿ Connect the camera to your computer and complete the installation referring to the procedures in Chapter 2. If you were unable to successfully install the software using the procedure given in this manual, see "Troubleshooting" (W-104). W-6 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 13
Preparation for Downloading Images W This chapter explains how to connect the camera or a card reader (thirdparty product) to your computer, and complete the installation. If you were unable to successfully install the software using the procedure given in this manual, see "Troubleshooting" (W-104). - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 14
into the IEEE1394 port. O Refer to the computer User's Manual for information on the terminal areas. O With the EOS-1Ds and EOS-1D, you can connect either plug (6-pin IEEE1394 port). 2 Plug the dedicated cable into your camera. O Open the cover and plug the cable into the < > terminal. O With - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 15
while the software installed from the Solution Disk is running after connecting the camera to the computer as a communications error may occur. • Set the camera's power switch to . • Open the memory or CF card slot cover. • Disconnect the dedicated cable, remove the battery, or remove - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 16
camera to a computer, use of the DC Coupler Kit is recommended. O If your computer has a 4-pin IEEE1394 port, use a Canon 4-pin to 4-pin IEEE1394 cable (optional) with the EOS-1Ds Mark II and EOS-1D Mark II, and a 4-pin to 6-pin IEEE1394 cable (optional) with the EOS-1Ds and EOS-1D. Using Your Card - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 17
EOS Viewer Utility ... W-12 Downloading Images W-16 Handling the Folders W-18 Memory Card Folder Structure and File Names W-18 Registering Frequent Use Folder ...W-19 Selecting the Image Display Mode .. W-20 Main Window (Thumbnail Display) ....W-20 Preview Window Display Digital Software - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 18
computer (W-8). ¿ The dialog box on which the camera model is displayed appears. O Your camera model is displayed in EOS XXX. ¿ For Windows Me, the [Scanner and Camera Wizard] dialog box appears. O Click the [Cancel] button to close the open window. 2 Click the [Start] button X select [All Programs - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 19
Starting the EOS Viewer Utility Main window Main window tool bar Menu bar Image information display area Displays the [File], [Edit], [View], [Option], [Window], [Help] menus. Displays basic shot information. Path display Displays the folder path selected Histogram in the Folder Tree Area. - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 20
button (W-26) Transfer images button (W-48) Erase images button (W-27) Thumbnail Frames button Shows/hides the information display frame of thumbnail images. Window button (W-25) EOS Capture button (W-88) Save File button (W-45) Rotate left 90 degrees button (W-26) Select images button (W-24 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 21
JPEG image converted from a RAW image with the EOS Viewer Utility, nothing is displayed on the RAW adjustment tool palette and the image cannot be edited. O Where you have selected a RAW image saved on the memory card inside the camera, nothing is displayed on the RAW adjustment tool palette and the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 22
the [My Pictures] folder here as an example.) 2 Display a folder to be copied. O Double-click the camera icon X the [1] folder (CF card) or the [2] folder (SD card) X the [DCIM] folder. O With the EOS-1Ds and EOS-1D, double-click the camera icon X the [1] folder X the [DCIM] folder. ¿ The [xxxEOS1D - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 23
in a third-party card reader, follow the same procedure to download the target folder to your computer. Supported Image Formats The images below can be displayed with the EOS Viewer Utility. Image Format RAW images taken with the EOS-1Ds Mark II, EOS-1D Mark II and EOS 20D File Extension .CR2 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 24
camera. Allows you to change the folder name. You can drag and drop folders from the Folder Tree Area to the other folders. Memory Card Folder Structure and File Names ****YYYY.JPG: JPEG image 1 DCIM xxxEOS1D ****YYYY.CR2: EOS-1Ds Mark II, EOS-1D Mark II RAW image ****YYYY.TIF: EOS-1Ds, EOS - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 25
Handling the Folders Registering Frequent Use Folder You can register frequent use folders as bookmark folders. 1 Display a folder to be registered (W-16). W 2 Register a folder as a bookmark folder. O Drag and that folder will not be deleted. Working with Images in the EOS Viewer Utility W-19 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 26
Mode You can select the display size and method of images. Main Window (Thumbnail Display) Various information can be displayed with images. Display number Numbers are assigned sequentially to the displayed images starting with the first image. Digital exposure compensation value (W-31) Recording - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 27
3 IPTC information button (W-51) Play sound button (W-28) You cannot display images in the preview window or edit RAW images (W-29) saved on a memory card in the camera directly. Work with the images saved on your computer from the memory card. O For some images, it may take some time to change - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 28
Checking the AF Point The AF point used when the shot was taken can be displayed. 1 Display the image in the preview window (W-20). 2 Click the [AF point] button. ¿ The AF point is displayed. O Clicking the button again hides the AF point. When the shot was taken with automatic AF point selection - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 29
on the keyboard to select images. 3 Selecting Images in the Preview Window Click the target image. ¿ The selected image is displayed on the top window. Working with Images in the EOS Viewer Utility O When only one preview window is displayed, you can click the [Show Previous Image] button or the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 30
Selecting Images Attaching Check Marks to Images You can attach a check mark to the RAW image, allowing you to select images more easily. Click the [Add Check Mark] button. ¿ When the check mark is placed, the [ ] icon appears in the frame of the image. O Clicking the [Remove Check Mark] button - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 31
the image whose size is the desired size (W-23). Working with Images in the EOS Viewer Utility 2 Click [Standardize and store preview window size] from the menu that appears by clicking the [Window] button. ¿ All the displayed preview windows are set to the same size as the selected image. W-25 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 32
can edit all the images that can be displayed in the EOS Viewer Utility. When multiple images are selected, the image, and clears the protection. O The [ ] is automatically displayed for images that were protected on the camera. O Protection only prevents images from being deleted. Other types of - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 33
. The number of items displayed differs depending on the camera settings. O You can copy the information as text data and paste it into another application. O Clicking the [T] button can hide the Detailed Information display area. Working with Images in the EOS Viewer Utility Comment input box - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 34
which sound was recorded. 1 Select an image with [ ] displayed, and click the [Play sound] button. ¿ The [Audio Note sound playback position. Click the [ ] button to resume. Printing Images You can use the EOS Viewer Utility to print images in index format. 1 Select images to be printed in index - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 35
includes starting up time of the retouching software (when using Adobe Photoshop 7.0). Working with Images in the EOS Viewer Utility You cannot display images in the preview window (W-20) or edit RAW images saved on a memory card in the camera directly. Work with the images saved on your computer - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 36
to retouching software (W-48). O The procedure below is an operating method in the preview window, but you are immediately reflected in the image. 1 Display the RAW images in the preview window (W-20). O If the RAW adjustment the RAW images. 3 Click the [Update] button. ¿ The RAW images are - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 37
Working with Images in the EOS Viewer Utility Editing RAW Images Adjusting the Brightness (Digital Exposure Compensation) You can adjust the brightness of an image in the range of +/-2 stops in 0.1-stop increments. Drag the slider left or right to - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 38
then save white balance data on your computer (W-36) and register them on the camera (W-82). Selecting the White Balance You can select the white balance that is the 4000 When flash is used. Approx. 6000 You can manually set color temperature for 2800 to 10000K (in 100K increments) (W-33). Approx. 2800 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 39
. O Enter the color temperature in the 3 [Color Temp.] input box in the range of 2800K to 10000K (in 100K increments). Working with Images in the EOS Viewer Utility W-33 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 40
not click the [Preview] checkbox, the adjusted white balance is applied immediately to the images. O When you use Click White Balance Function, [Click WB] is displayed in the [White Balance] list box. O You can also adjust by selecting the neutral gray part of the image. W-34 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 41
who understand the aim and effect of the color temperature converting filter or color compensating filter. O This function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II RAW images only. W Drag the slider left and right to adjust the white balance. Dragging the slider toward B-side - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 42
save the adjusted white balance data on your computer and then register them on the camera as the personal white balance settings (W-82). 1 Adjust the white balance (W-32 compatible with other cameras. White balance data is compatible with the EOS Viewer Utility for both Windows and Macintosh. W-36 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 43
the adjusted tone curve on your computer (W-39) and register it on the camera (W-80). 1 Click the [Tone Curve] button. ¿ The [Tone Curve] Tone curve settings list box Tone Curve 3 Working with Images in the EOS Viewer Utility Input box Open button (W-40) Shot Settings button Restores the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 44
and EOS-1D, up to four points can be shown. You cannot add or delete points. O Alternatively, you can adjust the tone curve by selecting [Q] on the tone curve and entering values directly into the [Input] / [Output] box. 4 Click the [Update] button on the RAW adjustment tool palette. ¿ The adjusted - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 45
] button. 3 ¿ The tone curve is saved. O Tone curve data for the EOS-1Ds Mark II and EOS-1D Mark II is compatible. O Tone curve data for the EOS-1Ds and EOS-1D is compatible. O Tone curve data is compatible with the EOS Viewer Utility for both Windows and Macintosh. Working with Images in the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 46
the [Open] button. ¿ The tone curve is loaded. 3 Click the [Update] button on the RAW adjustment tool palette. ¿ The tone curve is applied to the image brightness and color saturation values that were set by the camera automatically when the shot was taken. The tone curve adjustment options include - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 47
can be reproduced). 1 Click the [Standard] tab. ¿ The [Standard] tab sheet appears. O With the EOS-1Ds and EOS-1D RAW images, the [Standard] tab is not displayed. Proceed to step 2. 2 Select the color matrix from the list box. O With the EOS-1Ds and EOS-1D RAW images, [CM-Set1] and [CMSet2] are not - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 48
purpose. Not recommended for users who do not have a knowledge of image processing and Adobe RGB, DCF 2.0 (Exif 2.21). With a printer that does not support the sRGB PC environments or DCF 2.0 (Exif 2.21), the images are printed with moderate color tone. So, you need to process the images after - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 49
the procedure below to specify the color saturation, color tone, and color space for the image. O This function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II RAW images only. 1 Click the [Advanced] tab. ¿ The [Advanced] tab sheet W appears. 2 Select the settings from the list boxes - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 50
the Sharpness You can adjust the edge sharpness of an image. O With the EOS-1Ds and EOS-1D RAW images, [Level] and [Target] are displayed and can be adjusted. Select a setting from the list box. O With the EOS-1Ds Mark II and EOS-1D Mark II RAW images, [Sharpness] can be adjusted. Higher values give - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 51
box appears. 3 Specify the settings and click the [OK] button. ¿ The images are saved in the 3 selected folder. Working with Images in the EOS Viewer Utility Applies the settings and saves the image. Restores the settings to their original ones and closes the [Save File] dialog box. O When you - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 52
which the image will be saved. The name of the destination folder is displayed next to the [Browse] button. Select a setting for [Quality] ( saved files are shown below. Conversion Format Do not convert EOS-1Ds Mark II, EOS-1D Mark II EOS-1Ds, EOS-1D JPEG (8bit/ch) TIFF (8bit/ch) TIFF - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 53
without changing the name. W Enter the number of digits in the sequential number that attaches to the file and the starting number used. A maximum of 9 digits can be specified. 3 This is the text inserted before Format Name RJ RT8 RT16, RT16L Working with Images in the EOS Viewer Utility W-47 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 54
Transferring Images to Retouching Software You can transfer the images displayed in the EOS Viewer Utility to retouching software. The descriptions given here use Adobe Photoshop 7.0, as an example. 1 Select images to be transferred (W-23). 2 Click the [Transfer images] button. ¿ The [Transfer - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 55
EOS Viewer Utility Transferring Images to Retouching Software and [File Name]. ¿ Photoshop starts up and displays the transferred images. ¿ The transferred images are software such as Adobe Photoshop. O It is recommended that you should use the retouching software (third-party product) that supports - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 56
is displayed or the specified folder is always displayed when the EOS Viewer Utility starts up. Select the information to be displayed displayed in the preview window is the RAW image or the simultaneously recorded JPEG image. You can also select in the preview window whether the image displayed - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 57
problem-free transmission of images. You can attach this IPTC information to JPEG images, or to TIFF and JPEG images that were converted from RAW images and saved with the EOS [IPTC-2], or [IPTC-3] tab to display the tab sheet, and enter the EOS Viewer Utility for both Windows and Macintosh. W-51 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 58
the IPTC information for the previous image. When multiple images are selected, this button displays the IPTC information for the next image. Displays the image No. in a sequence. Displays the IPTC information entered before the [Previous] or [Next] button was clicked. Applies the entered IPTC - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 59
. W You can enter up to 8 characters. You can enter up to 11 characters. You can enter up to 32 characters. 3 Working with Images in the EOS Viewer Utility Settings on the [IPTC-3] tab sheet You can enter up to 3 characters. You can enter up to 32 characters. You can enter up - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 60
select [All Programs] ([Programs] in other versions of Windows) X [Canon Utilities] X [PhotoStitch] X [PhotoStitch]. ¿ [PhotoStitch Launcher] appears. 2 Click the [Merge Images] button. ¿ The PhotoStitch starts up. O Follow the instructions in the guidance window to merge the images. O Refer to the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 61
Settings in the EOS Viewer Utility W This chapter describes how to specify the owner's name and date/time, the Personal Functions, the Parameters, and the Personal White Balance in the camera. Specifying the Camera Settings W-56 Basic Settings W-57 Personal Function Settings W-58 Description - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 62
owner's name and shooting date/time on the camera, and check the camera properties data and the status of the battery and the memory card (W-57). O With the EOS-1Ds and EOS-1D, only the [Basic Settings] tab and [Detailed Settings] tab are displayed. Also, in [Detailed Settings] tab sheet, the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 63
Kit, [ ] is displayed. Applies the settings that you have specified in the [Basic settings] tab sheet to the camera. This box shows whether a memory card is loaded in the camera along with the available space on the card and its total capacity. With the EOS-1Ds and EOS-1D, information on the CF - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 64
the camera. You can also save the specified settings on your computer and load the saved settings. 1 Display the [Camera EOS-1Ds and EOS-1D, select the tab to be set. Loads the details of the Personal Functions that have been specified on the camera. Removes all the check marks from the windows - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 65
[Exposure functions 2] W Specifies the metering mode for manual exposure (W-63) Sets the maximum and minimum shutter speeds to be used (W-63) Sets the maximum and minimum apertures to be used (W-64) Specifying Camera Settings in the EOS Viewer Utility [Exposure functions 3] Registers and switches - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 66
Personal Function Settings [Other functions 1] Changes the timer's time length (W-71) Illuminates the LCD Add original decision data (W-74)*1, 2 *1 Compatible with the EOS-1Ds Mark II and EOS-1D Mark II only. *2 Compatible with the EOS-1Ds only. [Combination] Allows you to check the settings (W- - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 67
Personal Function settings on the camera. O Clicking the [Reset] button removes all the check marks from the windows. O If the Personal the [Camera settings] dialog box. ¿ When a Personal Function is applied to the camera, < > appears on the LCD panel. Specifying Camera Settings in the EOS Viewer - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 68
" in the camera's Instruction Manual. Disables the shooting modes O Click the shooting modes you do not want to use. O Unwanted shooting modes can be skipped while you are selecting the shooting mode. O This makes selecting the desired shooting mode faster. O With the EOS-1Ds and EOS-1D, [Disable - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 69
Specifying Camera Settings in the EOS Viewer Utility Personal Function Settings Specifies the metering mode for manual exposure W O Select the metering mode to be specified. O You can specify the metering mode to be used in the manual exposure mode. O When you set the manual exposure mode, the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 70
settings that are appropriate for each shooting mode. O The modes and settings are preset with the camera. See "Registering the Modes and Settings with the Camera" for information on the camera procedures (W-65). O Convenient when you want to instantly select the preset modes and settings to suit - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 71
< > button, then W press the < > button. Specifying Camera Settings in the EOS Viewer Utility ¿ < >appears in the LCD panel, indicating that Functions, refer to "Clearing and Resetting Personal Functions" in the camera's Instruction Manual. O Even if the shooting and metering modes selected by - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 72
the shots is -2, -1, 0, +1 and +2. O This function is useful for adjusting the range of bracketing. O Even when the setting is outside the bracketing level display range, the exposure is compensated as specified. O This function can be used in combination with C.Fn-09-2/3 and P.Fn-09. Changes the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 73
toward a slower shutter speed. With EF50mm f/1.4 USM lens Specifying Camera Settings in the EOS Viewer Utility O The program shift amount remains in effect until you set it back to the standard program manually or replace the battery or press the CLEAR button (QUALITY+WB). O The shift amount - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 74
it might be slightly out of focus. O This function is compatible with the EOS-1D only. Disables focus detection (search driving) by the lens drive O Normally super telephoto lenses. If autofocusing is attempted while the lens is way out of focus, the lens may stop operating. Focus manually until the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 75
in P.Fn-20. If you do not use P.Fn-20, once the camera focuses on the subject, continuous shooting will continue until the capacity of the memory card is reached. O P.Fn-16 cannot be used with manual focus lenses or with lenses that are too slow to be used with autofocusing. O Do not use this - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 76
shooting. O By reducing the maximum continuous shooting speed, AI Servo AF continuous shooting can be more stable. O With the EOS-1Ds Mark II and EOS-1Ds, only [Continuous Shooting] is displayed. In AI Servo AF, it may not be possible to complete the selected speed of continuous shots. Limits the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 77
reduce the shooting noise. Changes the timer's time length 4 Specifying Camera Settings in the EOS Viewer Utility O After you press activation time will consume more battery power. The battery life will become shorter and fewer number of shots can be taken with the battery. To turn off the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 78
bulb exposure time. Taking bulb shots for long periods speeds up battery charge depletion and reduces the number of available shots. Sets the default shutter-release time lag. O This function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II only. Since the difference is in 10-millisecond - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 79
Specifying Camera Settings in the EOS Viewer Utility Personal Function Settings Enables the electronic dial's function to be used in the reverse direction W O The electronic dial's rotational function can be reversed - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 80
more details, refer to "Shooting Information Display" in the camera's Instruction Manual. O For the decision of the original image, you will need the dedicated accessory (optional). O This function is compatible with the EOS-1Ds Mark II, EOS-1D Mark II and EOS-1Ds only. The original decision data - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 81
and then load the saved settings and apply them to the camera. 1 Specify the personal functions (W-62 to W-74). W 2 Select [Combination] from the list box. ¿ The [Combination] window appears. O With the EOS-1Ds and EOS-1D, select the [Combination] tab. 3 Check the settings, save and load - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 82
settings are not compatible with a camera other than the one the function was set. O To update an existing file, click the [Save] button. O Personal Function settings data saved on your computer is compatible with the EOS Viewer Utility for both Windows and Macintosh. Loading the Settings 1 Click - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 83
have specified in the [Shoot settings] tab sheet to the camera. * With the EOS-1Ds and EOS-1D, the [Apply] button is displayed. Applies the settings that you have specified in all the tab sheets to the camera and closes the [Camera settings] dialog box. Restores the parameters to their original - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 84
the Processing Parameters" in the camera's Instruction Manual. 1 Click the [Parameters] button (W-77). ¿ The [Parameters settings] dialog box appears. 2 Select the [Set 1], [Set 2], or [Set 3] tab. 3 Specify the tone curve, sharpness, and contrast. ¿ With the EOS-1Ds Mark II and EOS-1D Mark II, the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 85
when connected to the EOS-1D. 4 Adds a new set. *Displayed when connected to the EOS-1D. Higher values give a lower compression ratio and higher image quality. 4 Click the [Apply to camera] button. ¿ The [Confirm settings] dialog box appears. 5 Confirm the settings and click the [Yes - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 86
[TCD 3]) on the camera, refer to "Setting the Processing Parameters" in the camera's Instruction Manual. O With the EOS-1D, only one tone curve Tone Curve] button on the displayed [Parameters Settings] dialog box. 2 Select the [TCD 1], [TCD 2] or [TCD 3] tab. O For the EOS-1D, proceed to step 3. - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 87
the blue channel. Displays the green channel. Displays the red channel. 6 Click the [Apply to camera] button. ¿ The tone curve is registered on the camera. 4 7 Click the [Close] button. ¿ The [Tone curve settings] dialog box closes. Specifying Camera Settings in the EOS Viewer Utility W-81 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 88
white balance setting to the camera, < > to < > is displayed on the panel located on the back of the camera. O For more information on setting the personal white balance on the camera, refer to "Selecting the White Balance" in the camera's Instruction Manual. 1 Click the [Personal white - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 89
the [Open] or [Browse] button. ¿ The [Open] dialog box appears. Displays the setting status for the PC (Personal White Balance) registered on the camera along with their titles. Shot Settings W Specifying Camera Settings in the EOS Viewer Utility Enter a title for the personal white balance to be - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 90
to specify the settings. O For more information on setting the color matrix on the camera, refer to "Selecting the Color Matrix" in the camera's Instruction Manual. O This function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II only. 1 Click the [Color matrix] button (W-77). ¿ The [Color - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 91
strongly. [0] applies the standard color matching adjustment. 4 [+2] strongly adjusts the colors so that skin tones appear yellower while [+1] makes the same adjustment less strongly. Specifying Camera Settings in the EOS Viewer Utility W-85 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 92
O For more information on setting the JPEG quality on the camera, refer to "Setting the Image- recording Quality" in the camera's Instruction Manual. O This function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II only. 1 Click the [JPEG quality] button (W-77). ¿ The [JPEG quality settings - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 93
versions of Windows) X [Canon Utilities] X [EOS Capture xx] ("xx" is the version) X [EOS Capture Readme]. Starting the EOS Capture W-88 Remote Shooting W-90 Single-frame Shooting W-90 Timer Shooting W-91 Interval Timer Shooting W-92 Specifying the Camera Settings W-93 5 Camera Settings - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 94
¿ The dialog box on which the camera model is displayed appears. O Your camera model is displayed in EOS XXX. ¿ For Windows Me, the [Scanner and Camera Wizard] dialog box appears. O Click the [Cancel] button to close the open window. 2 Start up the EOS Viewer Utility (W-12). 3 Select the folder - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 95
Starting the EOS Capture EOS Capture main window Allows you to check and specify the camera settings (W-93). button (W-95) Shows/hides the white balance adjustment dialog box. W Rotate button The image is downloaded, rotating 90 degrees each time you click the button, regardless of the vertical - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 96
images. 3 Click the [Release] button. ¿ The shot images are displayed in the EOS Viewer Utility and saved in your computer automatically. Before you use the Remote Shooting function, be sure to check that the camera is ready for shooting. If the camera is not ready for shooting (the lens is not - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 97
times are based on Canon testing standards. (Time until images appear in the EOS Viewer Utility main window after you uncheck the [Save also on the camera's memory card] checkbox and click the [Release] button in the EOS Capture main window using the following: OS: Windows XP; CPU: 2.2 GHz - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 98
shots. Then click the [Start] button. O You can set a shooting interval between 5 seconds and 99 minutes 59 seconds in 1-second increments. O You can set up to a maximum of 1999 shots. ¿ Interval timer shooting is performed using the specified interval between shots and the specified number of shots - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 99
also on the camera's memory card] checkbox, the camera/PC icon is displayed, and when you uncheck the checkbox, the PC icon is displayed.) Bracket shots* Displayed when any of WBB/ AEB/ISOB/FEB is specified. Drive mode Displays the drive mode. AF mode Displays the AF mode. Battery status When - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 100
the Camera Settings 2 Click the icon. O The icon displayed here camera is ready for shooting. If the camera is not ready for shooting (the lens is not attached, etc.), you cannot make some of the settings. O Set functions which you cannot set with EOS Capture (drive mode, AF mode etc.) in the camera - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 101
blue/amber/green/magenta digital filter. O If the dialog box has not appeared, click the [ ] button. O This function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II only. Click the compensation position. W Compensate green. Compensate blue. Displays the compensation value. Compensate - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 102
. Save settings dialog box Clicking the checkbox also saves images on the memory card in the camera. Allows you to change the destination folder to which images will be saved. The name of the destination folder is displayed next to the [Browse] button. Use this field to enter a file name when - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 103
button X select [Programs] X [Canon Utilities] X [EOS XXX TWAIN Driver] X [TWAIN Driver Readme]. Help: Displayed by clicking the [Help] button in the TWAIN Driver main window. Your camera model is displayed in EOS XXX. Downloading Images with the WIA Driver W-98 Downloading with [Scanner and - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 104
screen as "EOS XXX". Downloading with [Scanner and Camera Wizard] You can download JPEG images to your computer by following the instructions on the dialog boxes. 1 Connect the camera to your computer (W-8). ¿ The dialog box on which the camera model is displayed appears. ¿ For Windows Me, the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 105
working with these pictures] radio button and click the [Next] button. ¿ The [Completing the Scanner and Camera Wizard] dialog box appears. 6 7 Click the [Finish] button. ¿ The images are saved and the [Scanner and Camera Wizard] dialog box closes. Downloading JPEG Images with the Driver W-99 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 106
Images with the WIA Driver Downloading with Explorer You can download JPEG images to your computer by dragging and dropping them. 1 Connect the camera to your computer (W-8). ¿ The dialog box on which the camera model is displayed and the [Scanner and Camera Wizard] dialog box appear. O Click - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 107
WIA TWAIN You can download JPEG images to your computer by using the TWAIN Driver-compatible retouching software. The descriptions given here use Adobe Photoshop 7.0, as an example. 1 Connect the camera to your computer (W-8). ¿ The dialog box on which the camera model is displayed and the [Scanner - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 108
EOS XXX". O Refer to the Software Instruction Manual supplied with the camera for information about the TWAIN Driver for the EOS-1D. 1 Connect the camera to your computer (W-8). ¿ The dialog box on which the camera model is displayed appears. O Click the [Cancel] button to close all the open windows - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 109
Troubleshooting and Uninstallation W This chapter provides troubleshooting and describes the software uninstallation procedures. Troubleshooting W-104 Uninstalling the Software W-108 Uninstalling the Software W-108 Uninstalling the Driver W-109 Index ...W-110 7 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 110
this, set the Auto power off function to [Off]. (Refer to "Menu Operations" in the camera's Instruction Manual.) O Does the [Add New Hardware Wizard] ([Found New Hardware Wizard] in Windows 2000) dialog box appear during installation? J Click the [Cancel] button, disconnect the dedicated cable, and - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 111
Kit to the camera or load a fully charged battery into the camera before connecting it to your computer. O Do you have more than one camera connected to your computer? If you connect more than one camera to the same computer, the driver and camera may not 7 operate normally. J Exit the software - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 112
Manager] (W-107). Click the plus symbol [+] to the left of [Imaging devices] and check that the connected camera is displayed. J If the connected camera is not displayed, the driver is not operating normally. Briefly disconnect and then reconnect the dedicated cable, ensuring that the connection is - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 113
Troubleshooting J If the connected camera or [Canon Digital Camera] is displayed in [Other devices] or [Unknown devices], the driver was not installed correctly. Use the following procedure to re-install the driver. 1 Delete the camera or [Canon Digital Camera] displayed in [Other devices] or [ - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 114
Programs] ([Programs] in other versions of Windows) X [Canon Utilities] X [EOSViewerUtility xx] X [EOSViewerUtility Uninstall]. O The EOS Viewer Utility version information is displayed in xx. 2 Proceed with the uninstallation as directed by the on-screen messages. ¿ Software is uninstalled. W-108 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 115
section explains how to uninstall the EOS-1Ds Mark II driver. For cameras other than the EOS-1Ds Mark II and EOS-1D Mark II, please refer to the Software Instruction Manual supplied with the camera. O For Windows XP Professional or Windows 2000, log in using computer Administrator privileges - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 116
Images W-27 Digital Exposure Compensation W-31 Downloading Images W-16 Downloading Images with the TWAIN Driver W-102 Downloading Images with the WIA Driver W-98 E Editing Images W-26 Editing RAW Images W-29 EOS Capture Main Window W-89 EOS Viewer Utility Main Window ..........W-13 Exiting - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 117
the EOS Capture W-88 Starting the EOS Viewer Utility W-12 Supported Image Formats W-17 System Requirements W-2 T Thumbnail Display W-20 Transferring Images to Retouching Software W-48 Troubleshooting W-104 U Uninstalling Driver W-109 Software W-108 Index W 7 W-111 Troubleshooting and - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 118
- Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 119
to install the bundled software. 2 Preparation for Downloading Images M-7 Explains how to connect the camera or a card reader (third-party product) to your computer. 3 Working with Images in the EOS Viewer Utility M-11 Explains how to use the EOS Viewer Utility to download images to your computer - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 120
9.0 to 9.2: Minimum 256 MB Interface FireWire (IEEE1394) EOS Viewer Utility: 100 MB or more Hard disk space EOS Capture: 600 MB or more PhotoStitch: 30 MB or more Display Resolution: 1024 768 or more Colors: Thousands or more O These software programs are not compatible with UFS (Unix File - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 121
Installing the Software This chapter describes how to install the bundled software. M Installing the Software M-4 1 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 122
O Check that your Macintosh complies with the system requirements for the software (M-2) as you follow the installation procedure. 1 Start up your Macintosh. O Quit any programs that are running. 2 Insert the CD (EOS DIGITAL Solution Disk). ¿ The CD icon appears on the desktop. 3 Start installation - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 123
click the [Next] button. M 6 Check the details of the License Agreement and then click the [Agree] button. 1 Installing the Software 7 Check the folder in which the software will be installed and then click the [Next] button. ¿ Installation begins. It takes approximately 2 to 3 minutes. M-5 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 124
Installing the Software 8 Finish the installation. O Click the [OK] button. ¿ After clicking the [OK] button in OS 9, the restart dialog box appears. Click [Yes] button to restart your computer. 9 Click the [Exit] button. 10Once the installation is complete, remove the CD. O Connect the camera to - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 125
Preparation for Downloading Images This chapter explains how to connect the camera or a card reader (third- party product) to your computer. M Connecting the Camera to Your Computer M-8 Using Your Card Reader M-10 2 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 126
FireWire (IEEE1394) port. O Refer to the computer User's Manual for information on the terminal areas. O With the EOS-1Ds and EOS-1D, you can connect either plug (6-pin IEEE1394 port). 2 Plug the dedicated cable into your camera. O Open the cover and plug the cable into the < > terminal. O With - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 127
while the software installed from the Solution Disk is running after connecting the camera to the computer as a communications error may occur. • Set the camera's power switch to . • Open the memory or CF card slot cover. • Disconnect the dedicated cable, remove the battery, or remove - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 128
card reader can download images directly from a memory card to the computer. 1 Remove the memory card from the camera. 2 Load the card into the card reader. O Proceed to Chapter 3 continuously. For information on connecting the card reader to your computer, refer to the card reader User's Manual - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 129
and save images, and transfer the downloaded M images to the retouching software. For more information on the restrictions of the EOS Viewer Utility, refer also to the source listed below. ReadMe: Double-click the [Canon Utilities] folder X the [EOS Viewer Utility] folder X [ReadMe]. Starting - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 130
1 Connect the camera to your computer (M-8). 2 Double-click the [Canon EOS Viewer Utility] icon on the desktop. ¿ The main window appears. O You can also start the EOS Viewer Utility by double-clicking the [Canon Utilities] folder X the [EOS Viewer Utility] folder X the [EOS Viewer Utility] icon - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 131
the EOS Viewer Utility Main window Main window tool bar Image information display area Displays basic shot information. Histogram Shows the distribution of the brightness of an image. Selecting the tab switches the histogram display values between Brightness and RGB. Path display Displays the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 132
Starting the EOS Viewer Utility Main window tool bar Rotate left 90 degrees button (M-26) Show/Hide Thumbnail Frames button Shows/hides the information display frame of thumbnail images. Display Size list box (M-22) Window button (M-25) Rotate right 90 degrees button (M-26) Transfer images - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 133
JPEG image converted from a RAW image with the EOS Viewer Utility, nothing is displayed on the RAW adjustment tool palette and the image cannot be edited. O Where you have selected a RAW image saved on the memory card inside the camera, nothing is displayed on the RAW adjustment tool palette and the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 134
in the folder name field here as an example.) 2 Display a folder to be copied. O Double-click the camera icon X the [1] folder (CF card) or the [2] folder (SD card) X the [DCIM] folder. O With the EOS-1Ds and EOS-1D, double-click the camera icon X the [1] folder X the [DCIM] folder. ¿ The [xxxEOS1D - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 135
in a third-party card reader, follow the same procedure to download the target folder to your computer. Supported Image Formats The images below can be displayed with the EOS Viewer Utility. Image Format RAW images taken with the EOS-1Ds Mark II, EOS-1D Mark II and EOS 20D RAW images taken with - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 136
camera. Allows you to change the folder name. You can drag and drop folders from the Tree View Area to the other folders. Memory Card Folder Structure and File Names ****YYYY.JPG: JPEG image 1 DCIM xxxEOS1D ****YYYY.CR2: EOS-1Ds Mark II, EOS-1D Mark II RAW image ****YYYY.TIF: EOS-1Ds, EOS - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 137
Handling the Folders Registering Frequent Use Folder You can register frequent use folders as bookmark folders. 1 Display a folder to be registered (M-16). 2 Register a folder as a bookmark folder. O Drag and drop folder will not be deleted. Working with Images in the EOS Viewer Utility M-19 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 138
Mode You can select the display size and method of images. Main Window (Thumbnail Display) Various information can be displayed with images. Display number Numbers are assigned sequentially to the displayed images starting with the first image. Digital exposure compensation value (M-31) Recording - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 139
(M-22) protect button (M-26) Play sound button (M-28) You cannot display images in the preview window or edit RAW images (M-29) saved on a memory card in the camera directly. Work with the images saved on your computer from the memory card. O For some images, it may take some time to change to - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 140
Checking the AF Point The AF point used when the shot was taken can be displayed. 1 Display the image in the preview window (M-20). 2 Click the [Display AF point] button. ¿ The AF point is displayed. O Clicking the button again hides the AF point. When the shot was taken with automatic AF point - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 141
the keyboard to select images. 3 Selecting Images in the Preview Window Click the target image. ¿ The selected image is displayed on the top window. Working with Images in the EOS Viewer Utility O When only one preview window is displayed, you can click the [Select Previous Image] button or the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 142
Selecting Images Attaching Check Marks to Images You can attach a check mark to the RAW image, allowing you to select images more easily. Click the [Add Check Mark] button. ¿ When the check mark is placed, the [ ] icon appears in the frame of the image. O Clicking the [Remove Check Mark] button - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 143
the image whose size is the desired size (M-23). Working with Images in the EOS Viewer Utility 2 Click [Standardize and store preview window size] from the menu that appears by clicking the [Window] button. ¿ All the displayed preview windows are set to the same size as the selected image. M-25 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 144
can edit all the images that can be displayed in the EOS Viewer Utility. When multiple images are selected, the image, and clears the protection. O The [ ] is automatically displayed for images that were protected on the camera. O Protection only prevents images from being deleted. Other types of - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 145
Working with Images in the EOS Viewer Utility Editing Images Deleting Images You can move unnecessary images images and input comments. Detailed Information display area O The shooting information is displayed. The number of items displayed differs depending on the camera settings. O You can copy - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 146
which sound was recorded. 1 Select an image with [ ] displayed, and click the [Play sound] button. ¿ The [Audio [ ] button to resume. Indicates the sound playback position. Printing Images You can use the EOS Viewer Utility to print images in index format. 1 Select images to be printed in index - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 147
time of the retouching software (when using Adobe Photoshop 7.0). You cannot display images in the preview window (M-20) or edit RAW images saved on a memory card in the camera directly. Work with the images saved on your computer from the memory card. Working with Images in the EOS Viewer Utility - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 148
to retouching software (M-48). O The procedure below is an operating method in the preview window, but you are immediately reflected in the image. 1 Display the RAW image in the preview window (M-20). O If the RAW adjustment the RAW images. 3 Click the [Update] button. ¿ The RAW images are - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 149
the Brightness (Digital Exposure Compensation) You can adjust the brightness of an image in the range of +/-2 stops in 0.1-stop increments. Drag the slider left or right to adjust the brightness. Adjustment value set with the slider. M 3 Working with Images in the EOS Viewer Utility M-31 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 150
then save white balance data on your computer (M-36) and register them on the camera (M-82). Selecting the White Balance You can select the white balance that is the 4000 When flash is used. Approx. 6000 You can manually set color temperature for 2800 to 10000K (in 100K increments) (M-33). Approx. 2800 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 151
. O Enter the color temperature in the 3 [Color Temp.] input box in the range of 2800K to 10000K (in 100K increments). Working with Images in the EOS Viewer Utility M-33 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 152
not click the [Preview] checkbox, the adjusted white balance is applied immediately to the images. O When you use Click White Balance Function, [White Point] is displayed in the [White Balance] list box. O You can also adjust by selecting the neutral gray part of the image. M-34 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 153
who understand the aim and effect of the color temperature converting filter or color compensating filter. O This function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II RAW images only. Drag the slider left and right to adjust the white balance. M The corrected value specified using - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 154
save the adjusted white balance data on your computer and then register them on the camera as the personal white balance settings (M-82). 1 Adjust the white balance (M-32 compatible with other cameras. White balance data is compatible with the EOS Viewer Utility for both Windows and Macintosh. M-36 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 155
save the adjusted tone curve on your computer (M-39) and register it on the camera (M-80). 1 Click the [Adjust Tone Curve] button. ¿ The [Tone Curve] Tone curve settings list box Tone Curve 3 Working with Images in the EOS Viewer Utility Input box Read button (M-40) Output box Save button (M-39 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 156
and EOS-1D, up to four points can be shown. You cannot add or delete points. O Alternatively, you can adjust the tone curve by selecting [Q] on the tone curve and entering values directly into the [Input] / [Output] box. 4 Click the [Update] button on the RAW adjustment tool palette. ¿ The adjusted - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 157
] button. ¿ The tone curve is saved. O Tone curve data for the EOS-1Ds Mark II and EOS-1D Mark II is compatible. O Tone curve data for the EOS-1Ds and EOS-1D is compatible. 3 O Tone curve data is compatible with the EOS Viewer Utility for both Windows and Macintosh. Working with Images in the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 158
the [Choose] button. ¿ The tone curve is loaded. 3 Click the [Update] button on the RAW adjustment tool palette. ¿ The tone curve is applied the image brightness and color saturation values that were set by the camera automatically when the shot was taken. The tone curve adjustment options include - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 159
be reproduced). 1 Click the [Standard] tab. ¿ The [Standard] tab sheet appears. O With the EOS-1Ds and EOS-1D RAW images, the [Standard] tab is not displayed. Proceed to step 2. 2 Select the color matrix from the list box. O With the EOS-1Ds and EOS-1D RAW images, [6CM set1] and [7CM set2] are not - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 160
purpose. Not recommended for users who do not have a knowledge of image processing and Adobe RGB, DCF 2.0 (Exif 2.21). With a printer that does not support the sRGB computer environments or DCF 2.0 (Exif 2.21), the images are printed with moderate color tone. So, you need to process the images after - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 161
the procedure below to specify the color saturation, color tone, and color space for the image. O This function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II RAW images only. 1 Click the [Advanced] tab. ¿ The [Advanced] tab sheet appears. M 2 Select the settings from the list boxes - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 162
the Sharpness You can adjust the edge sharpness of an image. O With the EOS-1Ds and EOS-1D RAW images, [Level] and [Target] are displayed and can be adjusted. Select a setting from the list box. O With the EOS-1Ds Mark II and EOS-1D Mark II RAW images, [Sharpness] can be adjusted. Higher values give - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 163
box appears. 3 Specify the settings and click the [OK] button. ¿ The images are saved in the 3 selected folder. Working with Images in the EOS Viewer Utility Restores the settings to their original ones and closes the [Save File] dialog box. Applies the settings and saves the image. O When - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 164
which the image will be saved. The name of the destination folder is displayed next to the [Browse] button. Select a setting for [Quality] ( saved files are shown below. Conversion Format Do not convert EOS-1Ds Mark II, EOS-1D Mark II EOS-1Ds, EOS-1D JPEG (8bit/ch) TIFF (8bit/ch) TIFF ( - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 165
files with the respective images. Enter the number of digits in the sequential number that attaches to the file and the starting number used. A maximum of 9 digits can be specified. This is the text inserted before Name RJ RT8 RT16, RT16L M 3 Working with Images in the EOS Viewer Utility M-47 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 166
Transferring Images to Retouching Software You can transfer the images displayed in the EOS Viewer Utility to retouching software. The descriptions given here use Adobe Photoshop 7.0, as an example. 1 Select images to be transferred (M-23). 2 Click the [Transfer images] button. ¿ The [Transfer - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 167
button. 3 Working with Images in the EOS Viewer Utility O See "Saving Images" (M-45 Name]. ¿ Photoshop starts up and displays the transferred images. ¿ The software such as Adobe Photoshop. O It is recommended that you should use the retouching software (third-party product) that supports - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 168
you to select whether the folder that was open the last time is displayed or the specified folder is always displayed when the EOS Viewer Utility starts up. You can also select in the preview window whether the image displayed is the RAW image or the simultaneously recorded JPEG image (M-20). M-50 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 169
by newspaper and communications companies to allow problem-free transmission of images. You can Select any of [IPTC-1], [IPTC-2], or [IPTC-3] tab to display the tab sheet, and enter 3 the information. O The entered EOS Viewer Utility for both Windows and Macintosh. Working with Images in the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 170
the IPTC information for the previous image. When multiple images are selected, this button displays the IPTC information for the next image. Displays the image No. in a sequence. Displays the IPTC information entered before the [Previous] or [Next] button was clicked. Applies the entered IPTC - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 171
can enter up to 32 characters. You can enter up to 256 characters. You can enter up to 32 characters. Working with Images in the EOS Viewer Utility You can enter up to 32 characters. M-53 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 172
panorama shot. 1 Double-click the [Canon Utilities] folder X the [PhotoStitch] folder X the [PhotoStitch Launcher] icon. ¿ [PhotoStitch Launcher] appears. 2 Click the [Merge Images] button. ¿ The PhotoStitch starts up. O Follow the instructions in the guidance window to merge the images. O Refer to - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 173
Specifying Camera Settings in the EOS Viewer Utility This chapter describes how to specify the owner's name and date/time, the Personal Functions, the Parameters, and the Personal White Balance in the camera. M Specifying the Camera Settings M-56 Basic Settings M-57 Personal Function - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 174
status of the battery and the memory card (M-57). Sets up Personal Functions and applies the settings to the camera (M-58). Specifies parameters (M-78), tone curve (M-80), personal white balance (M-82), color matrix (M-84), and JPEG quality (M-86) on the camera. O With the EOS-1Ds and EOS-1D, only - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 175
and time. This box shows the camera model, body ID (serial number) and firmware version. Imports the date and time from your computer. 4 The battery level of the camera is indicated by [ ] or [ ]. When you are using the DC Coupler Kit, [ ] is displayed. Applies the settings that you have specified - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 176
the camera. You can also save the specified settings on your computer and load the saved settings. 1 Display the [Camera EOS-1Ds and EOS-1D, select the tab to be set. Loads the details of the Personal Functions that have been specified on the camera. Removes all the check marks from the windows - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 177
different windows. [Exposure functions 1] Disables the shooting modes (M-62) Disables the metering modes (M-62) [Exposure functions 2] Specifies the metering mode for manual after picture-taking (M-71) * Compatible with the EOS-1D only. Specifying Camera Settings in the EOS Viewer Utility M-59 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 178
Personal Function Settings [Other functions 1] Changes the timer's time length (M-71) Illuminates the LCD Add original decision data (M-74)*1, 2 *1 Compatible with the EOS-1Ds Mark II and EOS-1D Mark II only. *2 Compatible with the EOS-1Ds only. [Combination] Allows you to check the settings (M- - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 179
Personal Function settings on the camera. O Clicking the [Reset] button removes all the check marks from the windows. O If the Personal [Camera settings] dialog box. 4 ¿ When a Personal Function is applied to the camera, < > appears on the LCD panel. Specifying Camera Settings in the EOS Viewer - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 180
" in the camera's Instruction Manual. Disables the shooting modes O Click the shooting modes you do not want to use. O Unwanted shooting modes can be skipped while you are selecting the shooting mode. O This makes selecting the desired shooting mode faster. O With the EOS-1Ds and EOS-1D, [Disable - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 181
used in the manual exposure mode. O When you set the manual exposure mode, the metering mode selected here will be set automatically. In the manual exposure mode, be set with the EOS-1Ds Mark II, EOS1D Mark II and EOS-1Ds, and the range of 1/400 sec. to 1/80 sec. cannot be set with the EOS-1D. O If - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 182
settings that are appropriate for each shooting mode. O The modes and settings are preset with the camera. See "Registering the Modes and Settings with the Camera" for information on the camera procedures (M-65). O Convenient when you want to instantly select the preset modes and settings to suit - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 183
the < > button, then press the < > button. M Specifying Camera Settings in the EOS Viewer Utility ¿ < > appears in the LCD panel, indicating that , refer to "Clearing and Resetting Personal Functions" in the camera's Instruction Manual. O Even if the shooting and metering modes selected by - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 184
the shots is -2, -1, 0, +1 and +2. O This function is useful for adjusting the range of bracketing. O Even when the setting is outside the bracketing level display range, the exposure is compensated as specified. O This function can be used in combination with C.Fn-09-2/3 and P.Fn-09. Changes the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 185
shutter speed. Shutter Speed With EF50mm f/1.4 USM lens Specifying Camera Settings in the EOS Viewer Utility O The program shift amount remains in effect until you set it back to the standard program manually or replace the battery or press the CLEAR button (QUALITY+WB). O The shift amount - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 186
it might be slightly out of focus. O This function is compatible with the EOS-1D only. Disables focus detection (search driving) by the lens drive O Normally super telephoto lenses. If autofocusing is attempted while the lens is way out of focus, the lens may stop operating. Focus manually until the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 187
in P.Fn-20. If you do not use P.Fn-20, once the camera focuses on the subject, continuous shooting will continue until the capacity of the memory card is reached. O P.Fn-16 cannot be used with manual focus lenses or with lenses that are too slow to 4 be used with autofocusing. O Do not use - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 188
shooting. O By reducing the maximum continuous shooting speed, AI Servo AF continuous shooting can be more stable. O With the EOS-1Ds Mark II and EOS-1Ds, only [Continuous Shooting] is displayed. In AI Servo AF, it may not be possible to complete the selected speed of continuous shots. Limits the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 189
Timer 16 sec. Timer Post-shutter release timer O battery power. The battery life will become shorter and fewer number of shots can be taken with the battery. To turn off the function's activation time midway, press the < button or < > button. > button, < > Specifying Camera Settings in the EOS - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 190
until the bulb exposure ends. O Convenient when you want to monitor the elapsed bulb exposure time. Taking bulb shots for long periods speeds up battery charge depletion and reduces the number of available shots. Sets the default settings when the CLEAR button is ON O You can use this function to - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 191
important than a stable shutter-release time lag. O This function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II only. Since the difference is in 10-millisecond increments, the time lag while the AF point is being selected. Specifying Camera Settings in the EOS Viewer Utility M-73 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 192
more details, refer to "Shooting Information Display" in the camera's Instruction Manual. O For the decision of the original image, you will need the dedicated accessory (optional). O This function is compatible with the EOS-1Ds Mark II, EOS-1D Mark II and EOS-1Ds only. The original decision data - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 193
and then load the saved settings and apply them to the camera. 1 Specify the personal functions (M-62 to M-74). 2 Select [Combination] from the list box. ¿ The [Combination] window M appears. O With the EOS-1Ds and EOS-1D, select the [Combination] tab. 3 Check the settings, save and load - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 194
settings are not compatible with a camera other than the one the function was set. O To update an existing file, click the [Save] button. O Personal Function settings data saved on your computer is compatible with the EOS Viewer Utility for both Windows and Macintosh. Loading the Settings 1 Click - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 195
the settings that you have specified in the [Shoot settings] tab sheet to the camera. *With the EOS-1Ds and EOS-1D, the [Apply] button is displayed. Restores the parameters to their original ones and closes the [Camera settings] dialog box. Applies the settings that you have specified in all the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 196
the Processing Parameters" in the camera's Instruction Manual. 1 Click the [Parameters] button (M-77). ¿ The [Parameters settings] dialog box appears. 2 Select the [Set 1], [Set 2], or [Set 3] tab. 3 Specify the tone curve, sharpness, and contrast. ¿ With the EOS-1Ds Mark II and EOS-1D Mark II, the - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 197
is set (M-80). Deletes the selected set. *Displayed when connected to the EOS-1D. Adds a new set. *Displayed when connected to the EOS-1D. 4 Higher values give a lower compression ratio and higher image quality. 4 Click the [Apply to camera] button. ¿ The [Confirm settings] dialog box appears - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 198
[TCD 3]) on the camera, refer to "Setting the Processing Parameters" in the camera's Instruction Manual. O With the EOS-1D, only one tone curve Tone Curve] button on the displayed [Parameters Settings] dialog box. 2 Select the [TCD 1], [TCD 2] or [TCD 3] tab. O For the EOS-1D, proceed to step 3. - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 199
the blue channel. Displays the green channel. Displays the red channel. M 6 Click the [Apply to camera] button. ¿ The tone curve is registered on the camera. 4 7 Click the [Close] button. ¿ The [Tone curve settings] dialog box closes. Specifying Camera Settings in the EOS Viewer Utility M-81 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 200
white balance setting to the camera, < > to < > is displayed on the panel located on the back of the camera. O For more information on setting the personal white balance on the camera, refer to "Selecting the White Balance" in the camera's Instruction Manual. 1 Click the [Personal white - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 201
3 Click the [Open] or [Browse] button. ¿ The [Open] dialog box appears. Displays the setting status for the PC (Personal White Balance) registered on the camera along with their titles. M Specifying Camera Settings in the EOS Viewer Utility Registers the selected PC Enter a title for the personal - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 202
to specify the settings. O For more information on setting the color matrix on the camera, refer to "Selecting the Color Matrix" in the camera's Instruction Manual. O This function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II only. 1 Click the [Color matrix] button (M-77). ¿ The [Color - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 203
strongly adjusts the colors so that skin tones appear yellower while [+1] makes the same adjustment 4 less strongly. 4 Click the [Apply to camera] button. ¿ The color matrix is registered on the camera. 5 Click the [Close] button. ¿ The [Color matrix settings] dialog box closes. Specifying - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 204
O For more information on setting the JPEG quality on the camera, refer to "Setting the Image- recording Quality" in the camera's Instruction Manual. O This function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II only. 1 Click the [JPEG quality] button (M-77). ¿ The [JPEG quality settings - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 205
. Readme: Double-click the [Canon Utilities] folder X the [EOS Capture] folder X [ReadMe]. Starting the EOS Capture M-88 Remote Shooting M-90 Single-frame Shooting M-90 Timer Shooting M-91 Interval Timer Shooting M-92 Specifying the Camera Settings M-93 Camera Settings M-93 White Balance - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 206
up the EOS Viewer Utility (M-12). 3 Select the folder to save the image in. O Select a folder in the Tree View Area to save the image in, or create a new folder (M-16). (The [Capture] folder is created here as an example.) 4 Click the [EOS Capture] button. ¿ The EOS Capture main window appears. M-88 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 207
Starting the EOS Capture EOS Capture main window Allows you to check and specify the camera settings (M-93). button (M-95) Shows/hides the white balance adjustment dialog box. M Rotate button The image is downloaded, rotating 90 degrees each time you click the button, regardless of the vertical or - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 208
images. 3 Click the [Release] button. ¿ The shot images are displayed in the EOS Viewer Utility and saved in your computer automatically. Before you use the Remote Shooting function, be sure to check that the camera is ready for shooting. If the camera is not ready for shooting (the lens is not - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 209
above. • Transfer times are based on Canon testing standards. (Time until images appear in the EOS Viewer Utility main window after you uncheck the [Save M also on the camera's memory card] checkbox and click the [Release] button in the EOS Capture main window using the following: OS: OS X 10 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 210
shots. Then click the [Start] button. O You can set a shooting interval between 5 seconds and 99 minutes 59 seconds in 1-second increments. O You can set up to a maximum of 1999 shots. ¿ Interval timer shooting is performed using the specified interval between shots and the specified number of shots - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 211
camera's memory card] checkbox, the camera/PC icon is displayed, and when you uncheck the checkbox, the PC icon is displayed.) Bracket shots* Displayed when any of WBB/AEB/ISOB/FEB is specified. Battery status When you are using a battery, [ ] is displayed. When you are using the DC Coupler Kit - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 212
the Camera Settings 2 Click the icon. O The icon displayed here camera is ready for shooting. If the camera is not ready for shooting (the lens is not attached, etc.), you cannot make some of the settings. O Set functions which you cannot set with EOS Capture (drive mode, AF mode etc.) in the camera - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 213
the blue/amber/green/magenta digital filter. O If the dialog box has not appeared, click the [X] button. O This function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II only. Click the compensation position. Compensate green. M Compensate blue. Displays the compensation value. Compensate - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 214
. Save settings dialog box Clicking the checkbox also saves images on the memory card in the camera. Allows you to change the destination folder to which images will be saved. The name of the destination folder is displayed next to the [Browse] button. Use this field to enter a file name when - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 215
Troubleshooting and Uninstallation This chapter provides troubleshooting and describes the software uninstallation procedures. M Troubleshooting M-98 Uninstalling the Software M-100 Index ...M-101 6 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 216
Kit to the camera or load a fully charged battery into the camera before connecting it to your computer. O Do you have more than one camera connected to your computer? If you connect more than one camera to the same computer, the driver and camera may not operate normally. J Quit the software - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 217
.canon.EOS Capture.plist • PhotoStitch Pref Preferences file shared by all software programs for communications (OS X only) Preferences file for the EOS Viewer Utility Preferences file for the EOS Capture (OS X only) Preferences file for the PhotoStitch 6 Troubleshooting and Uninstallation M-99 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 218
the [Special] menu.) and empty the Trash. You cannot reinstall the software until you have emptied the Trash. 1 Display the folder in which the software is saved. O Open the [Canon Utilities] folder. 2 Drag the folder for the software to be uninstalled to the Trash. 3 Select the [Finder] menu on - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 219
Digital Exposure Compensation M-31 Selecting the Color Matrix M-41 Downloading Images M-16 Selecting the Contrast M-41 E Selecting the Display Size M-22 Editing Images M-26 Selecting the Sharpness M-44 Editing RAW Images M-29 Setting the IPTC Information M-51 EOS Capture Main Window - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 220
the Processing Parameters . M-30 Starting the EOS Capture M-88 Starting the EOS Viewer Utility M-12 Supported Image Formats M-17 System Requirements M-2 T Thumbnail Display M-20 Transferring Images to Retouching Software M-48 Troubleshooting M-98 U Uninstalling the Software M-100 M-102 - Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 221
- Canon EOS-1Ds | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 222
accessories introduced after this date, contact your nearest Canon Service Center. • The camera's specifications and physical appearance are subject to change without notice. • There may be small changes to screens and differences in wording of the software in this manual. CT1-1276-000 © CANON