Canon EOS Rebel T3 18-55mm IS II Lens Kit EOS Utility 2.10 for Windows Instruc
Canon EOS Rebel T3 18-55mm IS II Lens Kit Manual
View all Canon EOS Rebel T3 18-55mm IS II Lens Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon EOS Rebel T3 18-55mm IS II Lens Kit manual content summary:
- Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 1
II 7D 60D 50D 40D REBELT3i 600D REBELT1i 500D REBELXSi 450D REBELT3 1100D REBELXS 1000D REBELT2i 550D Instruction Manual O Content of this Instruction Manual O EU is used for EOS Utility. O Camera model is displayed as an icon. Example: EOS Reference Index © CANON INC. 2011 CT1-7195EUWE-000 - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 2
support will be made available for the SOFTWARE. 4. LIMITED WARRANTY AND LIMITATION OF LIABILITY: It is your responsibility to choose, maintain and match the hardware and software components of your computer system. Thus Canon does not guarantee uninterrupted service (c) (1) (ii) of the Rights - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 3
2GB Supported Camera Can be used for RAW images, JPEG images or MOV movies shot with the cameras below. EOS-1D Mark IV EOS-1D Mark III EOS 7D EOS 50D EOS REBEL T3i/600D EOS REBEL T1i/500D EOS REBEL T3/1100D EOS-1Ds Mark III EOS 5D Mark II EOS 60D EOS 40D EOS REBEL T2i/550D EOS DIGITAL REBEL XSi - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 4
Picture Style file to the camera ¿ p.18 O To register a personal white balance in the camera ¿ p.20 O To set a JPEG quality and apply to the camera ¿ p.21 O To adjust a white balance setting and apply to the camera ¿ p.22 O To register lens E2 II A/B/C/D, E3/A, E4/A, E4 II A/B/C/D, or E5A/B/C/D - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 5
your camera and computer), starting up EU, downloading images from your camera to your computer and exiting EU are explained here. Connecting the Camera and Computer Images Using ZoomBrowser EX ..... 10 Downloading Images without Using Canon Software... 10 Exiting EU 10 Introduction Contents at a - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 6
and direction of the USB port, refer to the computer User's Manual. 2 Connect the small plug of the cable into the terminal on your camera. O Once the plug is connected to the camera according to the steps for your camera model, preparation for downloading images is complete. Continue with "Starting - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 7
EU starts up. O For cameras other than 1D Mk IV 7D 60D REBELT3i 600D REBELT2i 550D REBELT3 1100D , you can operate the camera and download images saved on the memory card inserted in the camera to your computer. Refer to your camera's Instruction Manual for details. 4 Preferences Reference - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 8
in the camera that you Instruction Manual" (PDF electronic manual ). O Continue with "Exiting EU" (p.10). 3Remote Shooting 4 Preferences Reference Index ¿ The [Save File] dialog box appears and image downloading to your computer begins. ¿ The downloaded images are saved in the [My Pictures - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 9
Downloading Selected Images to Your Computer From the images saved in your camera's memory card, you can select the ones you want and download them to your computer. 1 Click [Lets you select and download images]. 2 View the images - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 10
3 Click the [Download] button. ¿ The [Download image] dialog box appears. 4 Specify the save destination and then click the [OK] button. Displays the save destination on the computer Download image dialog box Specify the save destination ¿ The [Save File] dialog box appears and image downloading to - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 11
reader. However, EU does not support image downloading using a card reader Instruction Manual" (PDF electronic manual). Downloading Images without Using Canon Software To download images with a card reader without using Canon camera's power switch to < OFF >. 3 Disconnect the cable from the camera - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 12
the Camera 17 Applying Picture Style Files to the Camera 18 Saving White Balance to your Computer 19 Registering Personal White Balance in the Camera ... 20 Setting JPEG Quality and Applying to the Camera .... 21 Adjusting White Balance and Applying to the Camera... 22 Registering Lens Aberration - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 13
/time recorded as shooting information in shot images. 3 Click the [ ] button. Capture window 1 Connect your camera and computer, and then start up EU (p.5). 2 Click [Camera settings/Remote shooting]. ¿ The capture window appears. Introduction Contents at a Glance 1 Downloading Images 2Camera - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 14
can set the camera's date and time Canon's website. *1 When the author or copyright holder (copyright notice) set is not displayed in full, moving the cursor to the displayed setting item will display all the entered information as a pop-up. *2 Movie function settings are for 1D Mk IV 5D Mk II 7D - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 15
Functions You can set and apply to the camera Picture Styles, personal white balance, JPEG quality and white balance adjustment. 1 Connect your camera and computer, and then start up EU (p.5). 2 Click [Camera settings/Remote shooting]. 3 Click the [ ] button. ¿ The capture window appears. ¿ The - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 16
77. Available Settings by Camera Model Setting 1D Mk IV 1Ds Mk III 1D Mk III Picture Style { Personal white balance * JPEG quality { White balance adjustment { Registering lens aberration correction/peripheral * illumination correction data 5D Mk II 7D 60D 50D REBELT3i 600D REBELT2i - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 17
. You can also register Picture Style files in the camera as user-defined settings you have downloaded from the Canon's website or created with Picture Style Editor (Picture Style file creating software) (hereinafter PSE) and saved to your computer. For 1D Mk IV 7D 60D REBELT3i 600D REBELT2i 550D - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 18
Style Settings and Applying to the Camera You can set your own Picture Style [Sharpness], [Contrast], [Saturation] and [Color tone] and apply them to the camera, in the same way as operating from the camera. 1 Click [Detail set.]. ¿ The [Detail set.] dialog box appears. 2 Set by clicking the pointer - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 19
Style Files to the Camera You can register up to three Picture Style files downloaded from the Canon's website or created with PSE and saved to your computer, as user-defined settings in your camera. 1 Click [Register User Defined style]. ¿ The [Register Picture Style File] dialog box appears - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 20
of Picture Style. For more details on Picture Style files, refer to the Canon's website. O The Picture Style files that you can apply to the camera are files with the ".PF2" extension only. O For details on using PSE, refer to the "Picture Style Editor Instruction Manual" (PDF electronic manual). 19 - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 21
filename, select a save destination, and then click the [Save] button. ¿ The white balance file is saved to your computer. Registering Personal White Balance in the Camera 1D Mk IV White balance files created by adjusting the white balance of an image and saving the results can be registered in the - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 22
white balance as the white balance. O For selecting personal white balance or manual white balance, refer to "Selecting the White Balance" in the camera's Instruction Manual provided with your camera. Setting JPEG Quality and Applying to the Camera 1D Mk IV 1Ds Mk III 1D Mk III You can set the - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 23
]. O To revert the corrected values to the original values, follow the procedure in step 2. Registering Lens Aberration Correction/Peripheral Illumination Correction Data for the Lens in the Camera 1D Mk IV 5D Mk II 7D 60D 50D REBELT3i 600D REBELT2i 550D REBELT1i 500D REBELT3 1100D You can register - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 24
Images 2Camera Settings 3Remote Shooting ¿ The correction data for the selected lens is registered in the camera. O You can delete correction data from the camera by removing the check mark from the registered lens and clicking the [OK] button. 4 Preferences Reference Index O For a list of - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 25
items of each tab as well as all items of Custom Functions. 3 Click the [ ] button. 1 Connect your camera and computer, and then start up EU (p.5). 2 Click [Camera settings/Remote shooting]. ¿ The capture window appears. ¿ The [My Menu] appears. Introduction Contents at a Glance 1 Downloading - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 26
and click the [Add] button. My Menu settings window ¿ The selected item is added to [Items that can be configured in My Menu on the camera] on the left side of the window. O You can register up to six items with the above procedure. O You can change the position of an - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 27
. You can also shoot by directly operating your camera even during remote shooting, or preset a time allowing the camera to shoot automatically with timer shooting. Remote Live View Shooting 27 Remote Live View Window Functions 32 Focusing Manually 32 Focusing Using AF 34 Focusing Using Quick - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 28
large numbers of shots with fixedframing such as for studio shooting. 1 Connect your camera and computer, and then turn the camera's power switch to < ON >. ¿ EU starts up. O REBELT1i 500D cannot communicate with EU if the camera's mode dial is set to < >. Set the mode dial to a mode other than - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 29
3 Set the camera. Drive mode setting Right-click under the setting item and select settings from the menu*1 that appears ( 1D Mk IV 5D Mk II 7D 60D 50D REBELT3i 600D REBELT2i 550D REBELT1i 500D REBELT3 1100D ) Mirror lockup menu display and setting Right-click under the setting item and select - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 30
that appears. Click Live View shoot. window Click Introduction Contents at a Glance 1 Downloading Images 2Camera Settings 3Remote Shooting 4 Preferences Reference Index O For cameras other than 1 Ds Mk III 1D Mk III 50D 40D REBELXSi 450D REBELXS 1000D , the [Live View/Movie func. set.] window - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 31
LV func. setting] and a setting for [Exposure simulation], and click the [OK] button. Select Click 5D Mk II Select [Stills only] and [Still display], and click the [OK] button. Select Click 7D 60D Select [Enable] for [LV func. setting] and the setting for [Exposure simulation], then click the [OK - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 32
2Camera Settings 3Remote Shooting 4 Preferences Reference Index O You cannot perform RAW processing. If you connect the camera to your computer during in-camera RAW processing, the camera and computer will connect after you finish processing. O On 60D REBELT3i 600D REBELT3 1100D you cannot set - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 33
of histograms (p.80), set your camera's Custom Function [Live View exposure simulation] to [Enable]. On 1D Mk IV 5D Mk II 7D 60D 50D , set [Exposure simulation . Focusing Manually You can focus manually while viewing the enlarged image in the [Remote Live View window]. 1 Set the lens's focus mode - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 34
3 Click the [ ] button. ¿ The section you selected in step 1 is displayed enlarged at 100% (actual pixel size) in the [Zoom View] window. Zoom View window 4 Adjust the focus. Closer Further away O[ ], [ ]: Adjustment Large amount O[ ], [ ] : Adjustment Medium amount O[ ], [ ] : Adjustment - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 35
Quick, Live and Face Detection Live AF modes, images can be focused automatically in the same way as on the camera itself. Focusing Using Quick Mode 1D Mk IV 5D Mk II 7D 60D 50D REBELT3i 600D REBELT2i 550D REBELT1i 500D REBELT3 1100D 1 Select [Quick mode] from the list box. ¿ The AF points - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 36
Focusing Using Live Mode 1D Mk IV 5D Mk II 7D 60D 50D REBELT3i 600D REBELT2i 550D REBELT1i 500D REBELT3 1100D 1 the position where you want to focus. ¿ AF is executed. ¿ When focus is achieved, the camera makes a beeping sound and the AF point turns green. O If focus is not achieved, the AF - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 37
Using Face Detection Live Mode 1D Mk IV 5D Mk II 7D 60D 50D REBELT3i 600D REBELT2i 550D REBELT1i 500D REBELT3 the capture window (p.77). Reference Index ¿ AF is executed. ¿ When focus is achieved, the camera makes a beeping sound and the AF point turns green. O If focus is not achieved, the - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 38
View Window You can change the white balance of an image in the [Remote Live View window] and register the changed white balance in the camera. 1 Select the white balance to apply to the image. ¿ The selected white balance is applied to the image displayed in real time and you can - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 39
to be the standard for white. Click 4 Click the [Apply to camera and execute test shooting] button. Introduction Contents at a Glance 1 image size to window: + O On 1D Mk IV 5D Mk II 7D 60D REBELT3i 600D REBELT2i 550D REBELT3 1100D , you can link flash setting/test shooting - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 40
the Aspect Ratio 1D Mk IV 1Ds Mk III 1D Mk III 7D 60D REBELT3i 600D As with the camera's Live View function, it is possible to shoot with a feeling similar Reference Index 3 Move the camera to adjust the horizontal/vertical alignment. 2 Move the camera and compose your picture. O To revert the - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 41
Canon camera. • Images that have been adjusted with Digital Photo Professional are also displayed in the condition when they were shot. O Even with supported 3Remote Shooting 4 Preferences Reference 3 Move the camera and subject to compose your picture. O You cannot use the Overlaid Display - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 42
Setting the Composite Ratio The composite ratio can be set from 0 to 100% in increments of 10%. Use the composite ratio slider to set the composite ratio. 1 Move cursor over the slider. ¿ The slider changes from white to blue and becomes movable. 2 Hold the right mouse button and drag the slider - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 43
computer, DPP starts up automatically, and the shot images are displayed. Shooting Movies 1D Mk IV 5D Mk II 7D 60D REBELT3i 600D REBELT2i 550D REBELT1i 500D REBELT3 1100D You can control your camera from EU and shoot movies from your computer screen. You cannot shoot movies without a memory card in - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 44
your computer. Image data having a check mark removed from its file name are not downloaded. Afterward, when downloading image data to your computer from the camera's memory card, use the method described on p.7 to p.10 of this Instruction Manual to download. 4 Preferences Reference Index 43 - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 45
5D Mk II 1 Prepare for Live View shooting. O Follow the procedure from step 1 to step 3 for " or [Exposure simulation]. O If the camera firmware is Ver.2.0.0 or later, set the frame rate on the camera. Note that if the frame rate has been set to 24 fps on the camera, if you change the movie recording - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 46
file name are not downloaded. Afterward, when downloading image data to your computer from the camera's memory card, use the method described on p.7 to p.10 of this Instruction Manual to download. 7D REBELT3 1100D 1 Prepare for Live View shooting. O Follow the procedure of step 1 and step 2 for - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 47
/Movie func. set.], and display the [Live View/Movie func. set.] window before setting. Select Click O Selectable movie recording sizes depend on the camera. 3 Focus (p.32, p.34). 4 Click the [ ] button and begin shooting. ¿ At the bottom left of the [Remote Live View window], a [ ] icon and the - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 48
from its file name are not downloaded. Afterward, when downloading image data to your computer from the camera's memory card, use the method described on p.7 to p.10 of this Instruction Manual to download. 60D 1 Prepare for Live View shooting. O Follow the procedure of step 1 and step 2 for - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 49
When setting the movie recording size, movie shooting mode, etc., click [Live View/Movie func. set.], and display the [Live View/ Movie func. set.] window before setting. Note the following when you set the movie recording size to [Movie Crop 640 x 480]. • The Movie crop image cannot be magnified - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 50
from its file name are not downloaded. Afterward, when downloading image data to your computer from the camera's memory card, use the method described on p.7 to p.10 of this Instruction Manual to download. REBELT3i 600D REBELT2i 550D 1 Prepare for Live View shooting. O Follow the procedure of step - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 51
When setting the movie recording size, click [Live View/Movie func. set.], and display the [Live View/Movie func. set.] window before setting. Select Click O Note the following when you set the movie recording size to [Movie Crop 640 x 480] on REBELT2i 550D . • The Movie crop image cannot be - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 52
of step 1 and step 2 for "Remote Live View Shooting" (p.27). 2 Set the camera's mode dial to < >. O When setting the movie recording size, click [Live View/Movie computer from the camera's memory card, use the method described on p.7 to p.10 of this Instruction Manual to download. Select Click Index - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 53
from its file name are not downloaded. Afterward, when downloading image data to your computer from the camera's memory card, use the method described on p.7 to p.10 of this Instruction Manual to download. 4 Preferences Reference Index O After you click the [Download] button, the file names of the - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 54
Timer-controlled Shooting Two types of timer shooting are available where the camera automatically takes shots at a specified time or a specified number. Timer Shooting You can automatically take a shot when the specified time elapses. 1 Display the capture window (p. - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 55
1D Mk IV 1Ds Mk III 1D Mk III . • For cameras with < B > (bulb) on the Mode dial, set to < B >. • For cameras without < B > (bulb) on the Mode dial, set the Mode dial to < M > (manual), and select [BULB] in the capture window or set the camera's shutter speed to [BULB]. 3 Set the desired aperture - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 56
II 7D 60D REBELT3i 600D REBELT2i 550D REBELT3 1100D From EU you can set the camera's flash function, as well as EX-series Speedlite (sold separately) compatible with flash function setting, in order to perform flash shooting. For more details on setting items, also refer to the Instruction Manual - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 57
Built-in flash]. Refer to your camera's Instruction Manual for details on setting items ([NormalFiring Wireless func.] button 1D Mk IV 5D Mk II REBELT2i 550D REBELT3 1100D To enable the wireless To cancel, select [Disable] from the menu. 7D 60D REBELT3i 600D To enable the wireless function, - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 58
on the camera's LCD monitor, EU [Flash function settings] window automatically closes. O You can use modeling flash by clicking the [Modeling flash] button. You should only use modeling flash for a maximum of 10 times continuously. (For more information, refer to the Instruction Manual provided with - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 59
Music] folder is installed to your computer, five tracks appear in [Background music to register] the first time as EOS Sample Music. O When the camera is in movie shooting mode, registering background music is not possible. Index ¿ A music file is added to [Background music to register]. O You - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 60
Changing the Playback Order of Music Files O Select a music file in [Background music to register], and then click the [ ] or [ ] button. ¿ The order of the music files changes. O You can also directly drag and drop music files within the [Background music to register] to change the order. Deleting - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 61
[Background music to register]. O This operation cannot be performed if EOS Sample Music is not installed on your computer. 4 Click the [Register] button. ¿ The music files in [Background music to register] are registered (copied) to the camera's memory card. O Music files already registered on the - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 62
4 Preferences You can change each of the EU functions on each tab sheet of the preferences window to make them easier to use. Preferences 62 Basic Settings 62 Destination Folder 62 File Name 63 Download Images 63 Remote Shooting 64 Linked Software 64 Introduction Contents at a Glance 1 - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 63
. If you remove the check mark, the auto power off function remains disabled, even if you set the auto power off function on the camera (only when the camera is connected to a computer.). O If you checkmark [Add WFT Pairing Software to the Startup folder], the WFT pairing software is added to the - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 64
numbers, and the start number individually for file names. [Images whose transfer settings were specified with the camera] in the [Settings for downloaded images] menu is only enabled for cameras capable of direct transfer of shot images. Refer to your camera's Instruction Manual for details. 63 - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 65
], the [Remote Live View window] automatically closes when the camera's Live View ends. On 1D Mk IV 7D 60D REBELT3i 600D REBELT2i 550D REBELT3 1100D , if the camera's Live View display is active when Remote Live View ends, the camera's Live View display also ends. Linked Software From the list - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 66
E4 II A/B/C/D, or E5A/B/C/D) ......... 68 Function for Use with the Accessories 69 Folder Structure and File Names in the Memory Card ... 70 Uninstalling the Software 70 Fixing the Plug to the Camera 71 List of Main Window Functions 73 List of Viewer Window Functions 74 List of Register Lens - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 67
does not start up even when you have set the camera's power switch to < ON >, either double-click the [EOS Utility] icon on the desktop or click the [ ] button ([Start] button in Windows XP), select [All Programs] [Canon Utilities] [EOS Utility] [EOS Utility] to start up EU. The card reader does not - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 68
could prevent the computer from waking up correctly. Refer to the computer User's Manual for more information on sleep mode. A non-Canon flash does not fire during Remote Live View shooting O When a non-Canon flash is mounted on the camera for Remote Live View shooting, set [Silent shooting] in the - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 69
time using the Wireless File Transmitter WFT-E2/A, E2 II A/B/C/D, E3/A, E4/A, E4 II A/B/C/D, or E5A/B/C/D (sold separately). For setting the WFT-E2/A, E2 II A/B/C/D, E3/A, E4/A, E4 II A/B/C/D, or E5A/B/C/D refer to the Instruction Manual provided with each product. 2 Click the [Browse] button and - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 70
creating software). For details on using each software, refer to the instruction manual for the software. For Picture Style files, refer to p.18. 3 Click the software you want to start up. ¿ The clicked software starts up. 1 Connect your camera and computer, and then start up EU (p.5). 2 Click the - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 71
the movie file. O When you play on the camera a movie that was shot with 1D Mk IV 5D Mk II 7D REBELT2i 550D or REBELT1i 500D , both the movie Start] button in Windows XP), select [All Programs] [Canon Utilities] [EOS Utility] [EOS Utility Uninstall]. 2 Proceed with the uninstallation as directed - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 72
it from detaching during remote shooting. 1D Mk IV 1 Open the covers. 3 With the plug as it is in step 2, connect it to the camera's terminal. terminal 4 Fix the cable protector with the fixing screw. 2 Pass the small plug of the cable through the cable - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 73
Remove the cap. 2 Attach the cap on the fixing screw. 3 Connect the small plug of the cable into the < > terminal on your camera. 4 Attach the cable protector and fix it with the fixing screw. Cable protector Introduction Contents at a Glance 1 Downloading Images 2Camera Settings 3Remote Shooting - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 74
List of Main Window Functions Control camera tab sheet (p.7) (p.8, p.74) (p.27, p.77) (p.68) (p.62) Exits EU (p.10) Wireless File Transmitter WFTE2/A, E2 II A/B/C/D, E3/A, E4/A, E4 II/A/B/C/D, or E5A/B/C/D (sold separately) and the Picture Style Editor (Picture Style file creating software). (p.69 - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 75
List of Viewer Window Functions (p.8) Switches the recording media Movie icon Images already transferred to computer icon Bracketing icon Selects the condition of the image Recording media folder hierarchy Recording time Video Snapshot album icon Rating icon* RAW image icon RAW + JPEG image - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 76
4 Preferences Reference Displays only the registered lenses Index No. of lenses registered in the camera/No. of lenses that can be registered Lens names displayed in the [Register lens aberration correction data] window/[Register peripheral illumination correction data] window may be partially - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 77
of My Menu Settings Window Functions (p.24) Switches My Menu position My Menu (up to 6 items) Adds to My Menu Applies My Menu to the camera Deletes from My Menu All items that can be applied to My Menu Closes [My Menu settings] window Introduction Contents at a Glance 1 Downloading Images 2Camera - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 78
List of Capture Window Functions O Displayed items differ depending on the model and settings of the camera connected. O For *1 to *8 explanations, refer to the next page. Flash ready*2 Mirror lockup Drive mode Bracketing Power status*1 Shots to go Shooting mode Color temperature - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 79
to the Shoot button. *5 Displayed only on 1D Mk IV 5D Mk II 7D 60D 50D REBELT3i 600D REBELT2i 550D REBELT1i 500D REBELT3 1100D . Even when it memory card in the camera. In movie mode, shot movies are saved only to the camera's memory card. *8 Displayed only on 7D 60D REBELT3i 600D REBELT2i - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 80
Function Settings Window Functions (p.55) 1D Mk IV 5D Mk II 7D 60D REBELT3i 600D REBELT2i 550D REBELT3 1100D MULTI flash count more details on settings, also refer to the Instruction Manual provided with your EX-series Speedlite or camera. Introduction Contents at a Glance 1 Downloading Images - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 81
at a Glance AF point Selects the white balance (p.37) Click white balance Displays the [Test Shooting] window (p.82) AF mode (p.34 to p.36) Lens drive (p.33) Checks the depth of field (p.36) Shows/hides the controllers 1 Movie recording time Movie recording in progress icon Frame rate Movie - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 82
Displays the [Test Shooting] window (p.82) AF mode (p.34 to p.36) Lens drive (p.33) Checks the depth of field (p.36) Display mode* Maintains display of switches to a quality suited to focusing while viewing on your camera's LCD monitor; clicking the [ ] button switches to a quality suited to - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 83
List of Test Shooting Window Functions (p.37) Test Shooting button Displays the [Click white balance] window (p.38) Saves the test shot image Enlargement ratio of the image Displays the capture window Closes the window RGB values* Rotates the image Enlargement/reduction of the image - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 84
(Remote Live View Shooting 39 Adjusting the Vertical Alignment of the Camera (Remote Live View Shooting 39 Adjusting the White Balance 22 Applying Personal White Balance 20 Applying Picture Style Files 18 Attaching the Cable Protector 72 B Basic Settings (Preferences 62 Bulb Exposures 54 - Canon EOS Rebel T3 18-55mm IS II Lens Kit | EOS Utility 2.10 for Windows Instruc - Page 85
Shooting Settings 64 Starting up EOS Utility 6 Supported Camera 2 System Requirements 2 T Instruction Manual has been reviewed thoroughly. However, if you should notice any errors or omissions, please contact a Canon Service Center. O Please note that irrespective of the above-mentioned, Canon
1
2
3
4
Introduction
Contents at
a Glance
Downloading
Images
Camera
Settings
Remote
Shooting
Reference
Preferences
Index
Communication Software for the Camera
EOS Utility
Ver. 2.10
Instruction Manual
1D Mk IV
1Ds Mk III
1D Mk III
5D Mk II
7D
60D
50D
40D
REBELT3i
600D
REBELT2i
550D
REBELT1i
500D
REBELXSi
450D
REBELT3
1100D
REBELXS
1000D
Content of this Instruction Manual
EU is used for EOS Utility.
Camera model is displayed as an icon.
Example: EOS-1D Mark IV
J
displays the relevant camera model.
In this manual, the windows used in the examples
are from Windows Vista.
The selection sequence of menus is displayed in
X
procedures.
(Example: Select the [Window] menu
X
[Main Window].)
Square brackets are used to indicate items such as
menu names, button names and window names
that appear on the computer screen.
Text inside < > indicates a camera switch name or
icon, or a keyboard key name.
**
indicates a reference page.
Click to move to the relevant page.
: Marks information that should be read before use.
: Marks additional information you may find helpful.
1D Mk IV
© CANON INC. 2011
CT1-7195EUWE-000
Switching Between Pages
Click on arrows on the bottom right of the screen.
: next page
: previous page
: return to a page you had previously displayed
Click on the chapter headings on the right side of
the screen to switch to the contents page of that
chapter. Also, click the item you want to read about
on the table of contents to move to the relevant
page.