Canon Elura 60 DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual
Canon Elura 60 - Elura 60 MiniDV Camcorder Manual
UPC - 013803040166
View all Canon Elura 60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon Elura 60 manual content summary:
- Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 1
DV Network Software Instruction Manual Version 2 E This software is for use with Windows® XP only. - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 2
DV Messenger. Is Windows XP and Does Windows Windows Messenger Messenger operate and 4.5, 4.6 or 4.7 can its voice or video installed? Yes conversation function Yes be used? (Please consult Microsoft for details on Windows Messenger.) No No This software is compatible with Windows - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 3
This software requires an UPnP compatible router. It cannot be used with other routers. For details, consult your Internet service provider, telephone carrier or router manufacturer, or refer to the manual of the router. Follow now the instructions in this manual and install DV Messenger. Before - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 4
single computer solely for use with Canon's digital video camcorder products. You may physically transfer the SOFTWARE from one computer to another, provided that the SOFTWARE is used on only one computer at a time. You shall not install or use the SOFTWARE on a network, multiple CPU, multiple site - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 5
, fixes or support will be made available for the SOFTWARE. 6. LIMITED WARRANTY AND DISCLAIMER OF LIABILITY It is your responsibility to choose, maintain and match the hardware and software E components of your computer system. Thus, Canon does not guarantee uninterrupted service or correction - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 6
12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government end users shall acquire the SOFTWARE with only those rights set forth herein. Manufacturer is Canon Inc./30-2, Shimomaruko 3-chome, Ohtaku, Tokyo 146-8501, Japan. 9. SEVERABILITY In the event that any provision of - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 7
DV Network Software 17 Installing the Canon USB Video Driver 19 Installing the AV/C Camera Storage Subunit-WIA Driver 20 Connecting the Camcorder to a Computer 23 Connecting the Camcorder Using a USB Cable 23 Connecting the Camcorder Using a DV Cable 23 DV Messenger Preparations for DV - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 8
Uninstalling the Canon USB Video Driver 71 AV/C Camera Storage Subunit-WIA Driver Uninstalling the AV/C Camera Storage Subunit-WIA Driver 73 Troubleshooting DV Messenger ...75 Canon USB Video Driver 86 AV/C Camera Storage Subunit-WIA Driver 87 Uninstallation of the Canon USB Video Driver and AV - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 9
complies with the "AV/C Camera Storage Subunit Version 1.0" by the IEEE1394 Trade Association. • WIA stands for Windows Image Acquisition. WIA is a driver software for downloading images from digital devices onto a computer. WIA is preinstalled on Windows XP. © Canon Inc. 2005 All rights - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 10
this manual, the operating modes of camcorders are described as following: - CAMERA mode: Mode for recording video and sound to tape. - PLAY (VCR) mode: Mode for playing back video and sound recorded on a tape. - CARD PLAY mode: Mode for playing back images recorded on a memory card. - NETWORK mode - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 11
(OHCI compliant) Free Hard Disk Space: • DV Messenger: 100 MB or more • Canon USB Video Driver: 1 MB or more • AV/C Camera Storage Subunit-WIA Driver: 1 MB or more Display: 800 u 600 pixels/High Color (16 bit) or better Others: Windows Messenger Version 4.5, 4.6 or 4.7, sound function - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 12
from a connected VCR or 8mm camcorder to digital signals and transferring them to the computer. For details, refer to the camcorder instruction manual. AV/C Camera Storage Subunit-WIA Driver ( 20) Installing the AV/C Camera Storage Subunit-WIA Driver allows you to use DV Messenger by connecting - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 13
OPTURA Pi E ZR20 XL1S ZR25 MC ZR10 ZR30 MC ZR40 ZR60 ZR80 ZR100 F Non-Canon camcorder Please refer to the Canon homepage for latest camcorder models. Available Functions and Drivers by Categories Functions Camcorders Categories A B C D E F DV Messenger Version 2 Real-time video - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 14
Required Accessories You need following items for using the Software: • Digital Camcorder • The Internet connection and a software that allows you to browse the Net • USB Cable or DV (IEEE1394) Cable If your camcorder is not listed under category A or B in Camcorder Categories ( 13), use a DV cable. - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 15
a long time, heat generation may cause damage to the camcorder. Turn off the camcorder after use. Tapes may be damaged if left in the camcorder for a long time. Do not leave tapes E in the camcorder to prevent damage. If you leave the camcorder turned on for a long time (e.g. when using the View - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 16
recognized as "Internet Gateway Device" ( 26). For details, consult your Internet service provider, telephone carrier or router manufacturer, or refer to the manual of the router. Be aware that yoour contact can access the contents of te tape or memory card in your camcorder when using DV messenger - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 17
Storage Subunit-WIA Driver, see Installing the AV/C Camera Storage Subunit-WIA Driver ( 20). Do not connect the camcorder to the computer when installing the DV Network Software. DV Messenger can only be installed with Windows Messenger 4.5, 4.6 or 4.7. Download Windows Messenger 4.7 from the - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 18
check mark next to [Copy Canon USB Video Drivers]. • If your camcorder is listed under category E or F in Camcorder Categories ( 13), remove the check mark next to [Copy AV/C Camera Storage Drivers]. 6 Read the license agreements and click [Yes]. 7 When the confirmation window appears, click [Yes - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 19
and installation is complete. E Installing the Canon USB Video Driver Installing the Canon USB Video Driver allows you to use DV Messenger by connecting the camcorder to a computer using a USB cable. To use the Canon USB Video Driver for using DV Messenger, your camcorder has to be listed under - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 20
camcorder. 2 Set the camcorder to NETWORK or CARD PLAY mode. (Camcorder without NETWORK mode: Set the camcorder to CARD PLAY mode.) 3 Connect the camcorder to the computer using the DV cable ( 23). • The driver installation starts automatically. • Depending on the setting of your computer, a video - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 21
to NETWORK or CARD PLAY mode. 3 Connect the camcorder to the computer using the DV cable ( 23). 4 From the [start] menu, select [My Computer]. 5 Right-click the mouse button on the [Canon Camera Storage Device] icon and select [Properties]. 6 Click the [Events] tab. Installing the Software 21 - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 22
the camcorder to the computer the next time. To start a WIA-compliant application automatically, select [Start this program] and click [OK]. If the started application displays a message such as [TWAIN data source not found. Reinstall the scanner software.], select [WIA-Canon Camera Storage - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 23
Categories ( 13), you can use a DV cable or a USB cable to connect your camcorder to the computer. With other camcorders, use a DV cable. E Connecting the Camcorder Using a USB Cable Make sure to install the DV Network Software before connecting the camcorder to the computer. Make sure the - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 24
of Windows XP Professional must first log in as an Administrator to use DV Messenger. Checking the Camcorder Connection 1 Connect the power adapter to the camcorder. 2 Set the camcorder to NETWORK mode. (Camcorder without NETWORK mode: Set the camcorder to CAMERA mode.) 3 Connect the camcorder to - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 25
connecting a Canon camcorder using a DV cable, check if [Canon DV Device] is displayed. • If [Canon DV Device] or [Canon USB Video] does not appear, click to display the device list and check if it is listed. • If [Canon DV Device] or [Canon USB Video] is not listed, install Windows XP Service Pack - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 26
UPnP Router If you are using an UPnP-compliant router to connect to the Internet, you need to install UPnP and disable the firewall of Windows XP to use DV Messenger. Installing UPnP 1 From the [start] menu, select [Control Panel]. 2 Click [Network and Internet Connections]. 26 Preparations for - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 27
DV Messenger 3 Click [Network Connections]. E 4 From the [Advanced] menu, select [Optional Networking Components] from the displayed menu. 5 Select [Networking Services] and click [Details]. Preparations for DV Messenger 27 - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 28
Client] and [Universal Plug and Play]. • If you have installed Windows XP Service Pack 2, place a check mark next to [Internet Gateway Device [Internet Gateway Device]. If not, your router is not correctly recognized by the computer and DV Messenger cannot be used. In such case, you need to - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 29
the files on your E computer, or write files onto your hard disk. Disable the firewall before using DV Messenger, and make sure to re-enable the firewall after use. 1 From the [start] menu, select [Control Panel]. DV Messenger 2 Click [Network and Internet Connections]. Preparations for - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 30
3 Click [Network Connections]. 4 Select [Local Area Connection], right-click the mouse button and select [Properties]. 30 Preparations for DV Messenger - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 31
under [Internet Gateway]. If not, your router is not correctly recognized by the computer and DV Messenger cannot be used. In such case, the firewall function of an Internet security software or anti-virus software may be active. For instructions on how to disable the firewall function, consult the - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 32
such as Windows Explorer while DV Messenger is started. Do not update Windows Messenger while DV Messenger is started. Do not connect two or more digital camcorders to the computer. Do not disconnect the interface cable while DV Messenger is started. If an anti-virus software is installed - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 33
, click [Click here to sign in]. DV Messenger DVM Panel Windows Messenger To use DV Messenger, both you and your contact need to be online. - If your contact is already online when you sign in: A message will be sent automatically - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 34
speaker or headphones as necessary. As microphone, use the microphone of the camcorder. 1 Set the camcorder to NETWORK mode. (Camcorder without NETWORK mode: Set the camcorder to CAMERA or PLAY (VCR) mode.) When you have set the camcorder to PLAY (VCR) mode, play back the tape. 2 Open the [Tools - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 35
]. If you are connecting a Canon camcorder using a USB cable, select [Canon USB Video]. If you are connecting a Canon camcorder using a E DV cable, select [Canon DV Device]. 5 When the video picture appears, click [Next]. In NETWORK or CAMERA mode, the live video appears. In PLAY (VCR) mode - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 36
Canon camcorder using a USB cable, select [Canon USB Video]. If you are connecting a Canon camcorder using a DV cable, select [Canon DV Device indicated and click [Next]. • In NETWORK or CAMERA mode: Speak into the microphone of your camcorder and check if the volume indicator operates correctly - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 37
or you can accept an invitation from your contact. If you connect to the Internet after starting DV Messenger, the connection may fail. Make sure to connect to the Internet first before starting DV Messenger. An error message may appear and the communication may not work correctly. In such case - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 38
the DVM panel. Video picture of your contact's camcorder Video picture of your camcorder • If your contact does not respond within 30 seconds after you press [Select], the connection will be canceled, and a message is automatically sent to your contact asking to download DV Messenger Version 2. 38 - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 39
as the contact, a connecting request appears on your computer screen. 1 When the connecting request dialog appears, click [Yes]. E The communication between your and your contact's DV Messenger starts and you can now operate the camcorder of your contact from the DVM panel - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 40
Ending DV Messenger Disconnecting DV Messenger 1 Click . 2 When the confirmation window appears, click [YES]. The communication with your contact ends. If you wish to communicate with another contact, click and select a contact from the list. Ending DV Messenger 1 Click the DV Messenger - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 41
respective tab when the [MY CAMERA] control panel is displayed ( 46). With camcorders not equipped with the NETWORK mode, it indicates the set mode of the camcorder. 4 Mode of the contact's Indicates the mode of the contact's camcorder camcorder (CAMERA mode, VCR mode, CARD mode). You can change - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 42
control allowed. Camcorder without NETWORK mode, remote control prohibited. appears when the camcorder is connected using a DV (IEEE1394) cable, and when using a USB cable. Here you find the buttons for various settings ( 43). Displays the camcorder model names ([Canon MiniDV] appears with - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 43
camcorder is set to allow remote control as the default setting. 3 Change background Click here to change the background image of image of Windows Windows Messenger ( 66). Messenger 4 Option Click here to select the option setting for DV Messenger ( 67). 5 - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 44
Messenger is started, the [DV Messenger] task and [DV Messenger] icon appear on the taskbar. 1 2 1 DV Messenger task 2 DV Messenger icon Appears when the DVM panel is displayed or minimized. If the DVM panel is minimized, click here to display it. A list of menus - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 45
function ( 62). Ends the View & Record function ( 62). Displays the [Select a contact] window and starts the communication of DV Messenger ( 37). Disconnects the communication between you and your contact. Displays the DV Messenger panel on the screen. Exits DV Messenger ( 40). Screen Displays 45 - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 46
can easily change the mode of the camcorder from the DVM panel. 1 Click the [MY CAMERA] or [CONTACT] tab. 2 Click the (CAMERA), (VCR) or the switch between the modes. (CARD) tab to Camcorder without NETWORK Mode With camcorders not equipped with the NETWORK mode, you have to change the position - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 47
DV Messenger 3 Wait until the video picture and camcorder information such as the tape counter appear on the camcorder screen and click [Start Camera]. E A message with the options [Accept] and [Decline] appears in the [Conversation] window of your contact. If your contact clicks [Accept], the - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 48
mode, or if a camcorder without NETWORK mode is set to a mode other than the CAMERA mode, you cannot transfer live video or sound to your contact. In such case, use instant messaging on the lower part of the [Conversation] window to communicate with your contact. The instant messaging conversation - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 49
's camcorder: Click the [CONTACT] tab followed by the (CAMERA) tab. (If your contact has a camcorder without NETWORK mode, click the [CONTACT] tab. The camcorder of your contact must be set to CAMERA mode for you to control the camera functions.) DV Messenger Operating Camcorders with DV Messenger - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 50
is set to manual focus in View & Record mode, the camcorder switches to autofocus for about 10 seconds. This button appears only on the [Contact] control panel in View & Record mode. Click here to record the live video picture as a still image on the memory card. (Only camcorders with NETWORK mode - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 51
a short time. 1 Set the camcorder to NETWORK mode. (Camcorder without NETWORK mode: Set the camcorder to PLAY (VCR) mode.) DV Messenger 2 To operate your camcorder: Click the [MY CAMERA] tab followed by the (VCR) tab. (Camcorder without NETWORK mode: Click the [MY CAMERA] tab.) To operate your - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 52
Pause f. Slow Forward Playback g. Forward Playback h. Forward x2 Playback a bcd e f ghi i. Fast Forward Playback 9 Tape information Displays the time code of the tape. 52 Operating Camcorders with DV Messenger - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 53
images recorded on a memory card in a camcorder. E Image Sharing can only be used with camcorders equipped with the NETWORK mode or file transfer function. If the camcorder is connected using a DV cable, the AV/C Camera Storage Subunit-WIA driver contained in the DV Network Software needs to be - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 54
the images contained on the memory card appear. 4 Select the image Click [Refresh] to update the thumbnail list. • Files exceeding 20 MB will not be displayed. • If you move the mouse Thumbnails may not appear with images not recorded with your camcorder. 5 If you have selected the images you wish to - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 55
the [CONTACT] tab followed by the (CARD) tab. (If the camcorder of your contact is not equipped with the NETWORK mode, click the [CARD] tab.) The total number of images contained on the memory card of your contact and the number of shared images is displayed. DV Messenger 3 Click [Select image - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 56
. • If you move the mouse pointer on the thumbnail, the file information appears. • Thumbnails may not appear with images not recorded with the camcorder of your contact. 5 When you have selected the images you wish to transfer, click [Fetch]. 6 Select the destination folder, enter the file name - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 57
click [Cancel], the images will not be transferred to the computer. If you are connecting the camcorder using a USB cable, video and sound will not be transferred to the computer while the camcorder is recording a still image. It returns to normal when recording is complete. In interval mode, the - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 58
Setting of Image Capture Window 1 2 3 4 5 6 1 Store 640 x 480 pixels (VGA) and the maximum compatible size of the camcorder. You can select the shutter sound. If you wish to add a new 10 images. Select the number of images between 2, 5, 10, 15, 20, 25, 30, 35, 40, 45, 50 and unlimited. Select the - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 59
. Clicking [Capture] records a continuous series of still images. The number of still images can be selected in the [Setting of image capture] window ( 57). Clicking [Capture] records single still images at intervals. The number of still images and the interval can be selected in the [Setting - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 60
Capturing with Your Camcorder 1 Click the [MY CAMERA] tab followed by the tab. 2 Click [Capture]. The display changes based on the capture mode. (CAMERA) In Single and Continuous mode, the DVM Viewer window appears allowing you to review the captured still images. File name Number of still images - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 61
by the 2 Click [Capture]. (CAMERA) tab. E DV Messenger The display changes based on the capture mode and the status will be displayed. The same information is displayed on your contact's screen. In Single and Continuous mode, the DVM Viewer window appears allowing you to review the captured still - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 62
Using the View & Record Function You can remotely access the camcorder using DV Messenger. The View & Record function can only be used with camcorders equipped with the NETWORK mode. You need two Windows Messenger accounts (e-mail addresses); one home account and one remote account. You have - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 63
be memorized even if you close DV Messenger. DV Messenger Starting View & Record You have to set DV Messenger at home to standby mode for remote access. 1 Set the camcorder to NETWORK mode, connect it to the computer, start DV Messenger and sign in to Windows Messenger using the home account - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 64
after 24 hours. Connecting with View & Record You can remotely access the camcorder by connecting to the DV Messenger in the View & Record standby mode at home. 1 At the remote access point, start DV Messenger and sign in to Windows Messenger using the remote account. You do not need to connect - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 65
]. • DV Messenger will be connected and Windows Messenger's E [Conversation] window appears. • The home account will not appear if it is not registered in the contact list. In such case, add the home account to the contact list. During View & Record, the camcorder is set to manual focus - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 66
and click [Delete]. Only a part of the image may appear depending on the size of the image. Depending on the size of the Windows Messenger window, image and characters may overlap. If the background is set to a color other than white, the image may not appear correctly. Use the following - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 67
followed by the [Advanced] button. 5. On the [Advanced Appearances] window, select [Window] for [Item], and check if [Color 1] is set to white will be memorized even when you close DV Messenger. 1 Click menu. and select [DVM panel control] from the displayed DV Messenger 2 Place a checkmark next - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 68
if it is not required anymore. Close all programs that are running before uninstalling the software. 1 From the [start] menu, select [All Programs], [Canon Utilities], [DV Messenger] and [DV Messenger Uninstall] in succession. 2 On the confirmation dialog, click [Yes]. The uninstall utility starts - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 69
instruction manual. Above three operations can be performed with Windows Movie Maker 2 (version 2.1.4026.0). Make sure to connect the camcorder to a computer with Hi-Speed USB 2.0. Capturing movies from tape to the computer and recording edited movies to the tape using the Canon USB Video Driver - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 70
to PLAY (VCR) mode. Make sure that "AV DV" is not displayed. 2 Load a blank cassette. 3 Connect the camcorder to the computer using the USB cable ( 23). Start DV Messenger and record movies to the tape. For details, refer to the Windows Movie Maker 2 Help menu. 70 Capturing/Recording Movies - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 71
is listed under category B in Camcorder Categories ( 13): Set the camcorder to NETWORK mode and connect it to the computer using the DV cable. 3 From the [start] menu, select [Control panel]. 4 Click [Printers and Other Hardware]. Canon USB Video Driver Uninstalling the Canon USB Video Driver 71 - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 72
of the Canon USB Video Driver ([Canon USB Video Control] and [Canon USB Video Record]) will not be uninstalled with above procedure. To uninstall [Canon USB Video Control] and [Canon USB Video Record], see Uninstallation of the Canon USB Video Driver and AV/C Camera Storage Subunit-WIA Driver ( 87 - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 73
anymore. Close all programs that are running before uninstalling the driver. 1 Connect the power adapter to the camcorder. 2 Set the camcorder to NETWORK or CARD PLAY mode and connect it to the computer using the DV cable. If Scanner and Camera Wizard or Explorer are open, close them. 3 From the - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 74
of the Canon USB Video Driver and AV/C Camera Storage Subunit-WIA Driver ( 87). 6 Right-click the [Canon Camera Storage Device] icon and select [Delete]. When the icon does not appear, see Uninstallation of the Canon USB Video Driver and AV/C Camera Storage Subunit-WIA Driver ( 87). 7 In - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 75
Subunit-WIA Driver ( 87) DV Messenger Connection Canon camcorder: [Canon USB Video] or [Canon DV Device] does not appear in the [Audio Tuning Wizard] dialog. Î Check if the camcorder is correctly connected to the computer using the USB cable or DV cable. Î If you have a camcorder with NETWORK mode - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 76
asking him to download DV Messenger Version 2. Camcorder without NETWORK mode: The DVM panel does not change to [CARD] mode even if the camcorder is set to CARD PLAY mode. Î Check if the AV/C Camera Storage Subunit-WIA Driver is correctly installed. 1. Set your camcorder to CARD PLAY mode - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 77
Tuning Wizard]. Click [Start Camera] to restart the videoconference. I receive the video picture of my contact in the [Conversation] window E of Windows Messenger, but not the sound. Î If your contact is using a camcorder without NETWORK mode supporting the memory card function, ask if the - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 78
[Stop Camera] and interrupt the videoconference. Ask your contact to check his/her microphone settings in the [Audio Tuning Wizard]. My contact is receiving the video picture, but not the sound. Î Canon camcorder without NETWORK mode supporting the memory card function: Check if the camcorder is - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 79
may not appear smooth (e.g. the video picture stops and then appears to be fast-forwarded). In such case, uninstall the [QoS Packet Scheduler]. E 1. From the [Start] menu, select [Control Panel]. 2. Click [Network and Internet Connections]. 3. Click [Network Connections]. Troubleshooting 79 - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 80
4. Open the network properties. • When you are connecting to the Internet via LAN cable, right-click the [Local Area Connection] icon under ] and click [Uninstall]. • With [Local Area Connection] or [Wireless Network Connection], click the [General] tab for uninstallation. 80 Troubleshooting - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 81
• With [Broadband] or [Dial-up], click the [Networking] tab for uninstallation. E 6. When uninstallation is complete, control. Î Depending on the camcorder, Windows Messenger may produce anomalous noises such as buzzing sound when you pause playback or use playback control. Troubleshooting 81 - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 82
display [Slow]. The focus buttons on the DVM panel cannot be operated in CAMERA mode. Î Camcorder without NETWORK mode: If the Canon camcorder is set to (Easy Recording) mode, focus cannot be adjusted manually. Set the camcorder to a mode other than the (Easy Recording) mode. Î If you are using the - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 83
may not appear with images not recorded with a Canon camcorder. Î Check if the memory card cover is open. Î If you are connecting via a DV cable, check if an application software using the image transfer function (such as the Scanner and Camera Wizard) is started on the computer. If started - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 84
. Î The View & Record function can only be used with Canon camcorders equipped with the NETWORK mode. Î You cannot start the View & Record function if you camcorder if the IP address changed after you started DV Messenger. Please consult your Internet provider for details. 84 Troubleshooting - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 85
is started. End DV Messenger first. DV Messenger Uninstallation I have uninstalled DV Messenger, but [DV Network Software] is still listed in the [Add or Remove Programs] window. Î In the [Add or Remove Programs] window, select [DV Network Software] and click [Change/Remove]. Troubleshooting 85 - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 86
Canon USB Video Driver The Canon camcorder is connected to the computer via USB cable, but is not recognized by the computer. Î Check if the camcorder is set to NETWORK mode. Î Check if the USB cable is correctly connected. Î The driver is not correctly installed. Uninstall ( 71) and reinstall ( 19) - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 87
( 20). Cannot find the driver files. Î The driver files were not correctly installed to the computer. Insert the CD- ROM and reinstall the files to the computer. Downloading Canon Camera Storage Device is not recognized. Î The memory card cover is open. Disconnect the DV cable from the camcorder - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 88
2 Click [Performance and Maintenance]. 3 Click [System]. 4 Click the [Hardware] tab on the [System Properties]. 5 Click the [Device Manager] button. 88 Troubleshooting - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 89
-WIA Driver: If [Canon Camera Storage Device] appears under the [Imaging devices] and/or [Other devices] categories, use the following procedures to delete it. 1. Right-click the mouse button on the respective item and select [Uninstall]. Depending on your camcorder model, [Canon USB Video - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 90
] and [INF] folders in succession. If the [INF] Folder Is Not Visible in the [WINDOWS] Folder Use the following procedures to show all files and folders. 1. Click the [Tools] menu and select [Folder . If [Hide extensions for known file types] is selected, remove its check mark. 90 Troubleshooting - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 91
"Oem". • The Windows Notepad program will start and show the file contents. When uninstalling the USB Video Driver, click each [Oem*] file until you find the one that contains [; Canon USB Video Driver] in its first line. When uninstalling the AV/C Camera Storage Subunit-WIA Driver, click each [Oem - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 92
windows and restart the computer. The uninstall process is complete. The [Inf] folder contains numerous files that are critical to the computer's operation. Be extremely careful not to delete the wrong files. If you delete the wrong file, you may be unable to restart Windows. 92 Troubleshooting - Canon Elura 60 | DV NETWORK SOLUTION DISK Ver.2 Software Instruction Manual - Page 93
Customer Care Center Tel (US): 1-800-828-4040 (Mon.-Fri., 9 AM to 8 PM Eastern Time) CANADA -------- Canon CANADA Inc. Tel (Canada): 1-800-OK-CANON (1-800-652-2666) ASIA Canon Hongkong Co., Ltd. 19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong Phone: 852-2170-2828 Fax
E
Version 2
DV Network Software
Instruction Manual
This software is for use with Windows® XP only.