Canon FAX-JX200 FAX-JX200/JX201 User'sGuide - Page 67
Set Document In Correct Position, Tx/rx Cancelled, Tx/rx No., Check!! Nnnn
View all Canon FAX-JX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
SET DOCUMENT IN CORRECT POSITION Cause Action The document cannot be correctly detected or the document is too small. Make sure the document meets the requirements and is correctly loaded. If necessary, reload the document and press [Start/Copy]. See "Document Requirements" on page 15 and "Loading Documents and Paper" on page 16. TX/RX CANCELLED Cause You pressed [Stop] to cancel the transmission. TX/RX NO. nnnn If required, try sending again. Action Cause When the fax sends or receives a document, it assigns it a unique identification number (nnnn). !!CHECK!! nnnn Action Write the number down if you will need it later. Cause Action An error requiring servicing might have occurred. Turn OFF the machine, and unplug the power cord of the machine from the power supply. After a while, plug the power cord of the machine back in and turn ON the machine. If the same error occurs, contact a Canon service representative. Troubleshooting 65