Canon FAXPHONE L90 Reference Guide FAXPHONE L90 - Page 71
Memory Reception, Memory Lock Reception
UPC - 013803082029
View all Canon FAXPHONE L90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Before Using the Machine 1 Document and Paper 2 Sending and Receiving 3 Copying 4 Printing 5 System Manager Settings 6 Maintenance 7 Troubleshooting 8 Appendix 9 ˙ Memory Reception The machine automatically receives faxes in memory when printing is disabled under certain conditions (e.g., toner or paper has run out). Load paper and press [OK] to start printing faxes stored in memory. For toner empty, the machine automatically starts printing when the error is cleared. - The machine memory can store up to 346 fax jobs or approximately 346 pages.* * Based on the condition that the other party sends the fax by FAXPHONE L90 with ITU-T Standard Chart No.1, standard mode. The maximum number of pages that the machine's memory can store differs depending on the other party's machine. - Once the pages are printed, they are deleted from the memory. - If the memory becomes full, you will not be able to receive the remaining pages. Contact the other party and ask them to resend the remaining pages of the fax. Back Previous Next TOP ˙ Memory Lock Reception You can set the machine to store all documents in memory without automatically printing them. The default setting is . 1. Press [Menu]. 2. Press [ ] or [ ] to select , then press [OK]. If the System Password has been set, enter the System Password using the numeric keys, then press [OK]. 3. Press [ ] or [ ] to select , then press [OK]. 4. Press [ ] or [ ] to select , then press [OK]. If the memory lock password has already been set, enter the password, then press [OK]. 5. Press [ ] or [ ] to select , then press [OK]. When you select , the machine starts to print the received documents in memory. Table of Contents Index 3-25