Canon I9100 i9100 Easy Setup Instructions
Canon I9100 - i Color Inkjet Printer Manual
 |
View all Canon I9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon I9100 manual content summary:
- Canon I9100 | i9100 Easy Setup Instructions - Page 1
plastic wrapper from the Yellow Ink Tank (BCI-6Y). i9100 Series Photo Printer 5 Connect the Printer To Your Computer 1 TURN THE PRINTER OFF. IMPORTANT: Be sure the printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready. 2 Connect one - Canon I9100 | i9100 Easy Setup Instructions - Page 2
computer cannot detect a printer port, refer to the Troubleshooting chapter in the "i9100 Quick Start Guide" for instructions. 6 When the driver installation is complete, click Finish. 7 Register your product to ensure product support. Follow the on-screen instructions. 2 Close any open software
-
1 -
2
 |
 |
Install the Ink Tanks
Unpack the Printer
1
2
3
4
5
Prepare the Printer
Install the Print Head
Connect the Printer
To Your Computer
Start Here
Easy Setup Instructions
i
9100
Series
Photo Printer
Insert the ink tank into the correct slot.
(Refer to the color guide on the print head).
Press down until the ink tank locks into place.
Slide the print head into the holder.
The print head will rest at a slight angle.
Remove the print head from its package.
Remove the orange protective cap
from the print head.
NOTE:
Do not touch the electrical contacts.
Lower the lock lever and press it down
until it locks into place.
Raise the lock lever on the printer.
Electrical contacts
Print Head nozzles
Tear at notch to open
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
Open the front cover. The print head holder
automatically moves to the center. Remove
the protective tape.
Write down the serial number located to
the right of the print head. You will need
this later to register the product.
NOTE:
USB cable is not included.
Serial number
Protective tape
Press the POWER button.
Remove the shipping tape from the
front of the printer.
POWER
Lamp
POWER
Button
Shipping Tape
i
9
100 Series
Photo Printer
Carefully remove all items from the box.
Documentation
and Software Kit
Paper Rest
Peel back the orange tab and completely
remove the plastic wrapper from the Yellow
Ink Tank (BCI-6Y).
Twist off and discard the orange
protective cap.
NOTE:
To avoid spilling ink, never press
on the sides of an ink tank.
Insert the remaining five ink tanks into
their assigned slots.
Close the front cover, attach the paper rest
and extend the paper output tray.
Protective cap
Ink Tanks
BCI-6C Cyan
BCI-6M Magenta
BCI-6BK Black
BCI-6Y Yellow
BCI-6PC Photo Cyan
BCI-6PM Photo Magenta
Power Cord
i
9
100 Series
Print Head
USB Port
USB Cable
Continue with Step 6
on side two.
TURN THE PRINTER OFF
.
Connect one end of the USB cable
to the computer, the other to the printer.
IMPORTANT:
Be sure the printer is
off before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
1
2
3
4
1
5
4
3
1
2
1
2
3
4
5
1
2