Canon ME-200S SH User Manual

Canon ME-200S SH Manual

Get Canon ME-200S SH PDF manuals and user guides View all Canon ME-200S SH manuals
Add to My Manuals
Save this manual to your list of manuals

Canon ME-200S SH manual content summary:

  • Canon ME-200S SH | User Manual - Page 1
    PUB. DIM-1169-000 Multi-Purpose Camera Instruction Manual Caméra polyvalente Mode d'emploi English Français
  • Canon ME-200S SH | User Manual - Page 2
    and be contrary to copyright laws. FCC NOTICE Multi-Purpose Camera, ME200S-SH Systems. This device complies with Part 15 of not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. service or visit www.canon-europe.com/weee, or www
  • Canon ME-200S SH | User Manual - Page 3
    CAN ICES-3 (A)/NMB-3(A) WARNING This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. 3 Trademark Acknowledgements • ( ) microSD, ( ) microSDHC and ( ) microSDXC Logos are trademarks of SD-3C,
  • Canon ME-200S SH | User Manual - Page 4
    Highlights of the ME200S-SH The Canon ME200S-SH Multi-Purpose Camera boasts numerous features that allow it to excel in a variety of situations. The following highlights some of the ways that this camera can meet your needs. Video Quality and High Sensitivity High-sensitivity Super 35mm CMOS sensor
  • Canon ME-200S SH | User Manual - Page 5
    Mode: Auto and Manual Modes 31 Adjusting Main Camera Functions with the Joystick 32 Adjusting the Aperture 33 Manual Aperture 33 Momentary Automatic Aperture - Push Auto Iris 34 Exposure Compensation - AE Shift 34 Light Metering Mode 35 Gain 36 Manual Adjustment 36 Auto Gain Control (AGC) Limit
  • Canon ME-200S SH | User Manual - Page 6
    HD-SDI 2 terminal. • Some screenshots have been altered to make them easier to read. • Illustrations in the manual show the Canon ME200S-SH camera with a Canon EF 70-200mm f/2.8L IS II USM lens or Canon CN7x17 KAS S/E1 lens attached. For simplicity's sake, the lens's tripod mount is not displayed in
  • Canon ME-200S SH | User Manual - Page 7
    to [Auto] or when you are using push auto iris. 1 Open the [Light Metering] submenu. [Camera Setup] > [Light Metering] 2 Select the desired option and then press SET. [Camera Setup] [Light Metering] [Standard] Options [Backlight]: Suitable when shooting backlit scenes. [Standard]: Averages the
  • Canon ME-200S SH | User Manual - Page 8
    Functions] > [Reset Hour Meter] submenu reaches approximately 30,000 hours. Consult a Canon Service Center to have it replaced. • Do not point the camera toward an intense light source, such as the sun on a sunny day or an intense artificial light source. Doing so may damage the image sensor or the
  • Canon ME-200S SH | User Manual - Page 9
    Names of Parts Back view 1 2 3 4 5 6 7 Names of Parts 8 9 9 10 11 12 13 14 15 16 17 18 1 BAR (color bars) button (A 28)/ Assignable button 1 (A 50) 2 SET WB (custom white balance) button (A 40)/Assignable button 2 (A 50) 3 ABB (automatic black balance) button (A 22)/Assignable button 3 (A 50) 4
  • Canon ME-200S SH | User Manual - Page 10
    Names of Parts Front view 1 10 3 2 4 5 1 LENS terminal (A 23) 2 Lens mount handle (A 23) 3 EF lens mount index (A 23) 6 4 EF-S lens mount index (A 23) 5 EF lens contacts (A 23) 6 EF lens mount (A 23)
  • Canon ME-200S SH | User Manual - Page 11
    Top view 1 Names of Parts 11 1 Socket for 0.64 cm (1/4") screws 2 Socket for 0.95 cm (3/8") screws (A 26) 2 3 7 3 TB-1 Tripod Adapter Base for tripods with 0.95 cm (3/8") screws (A 26)
  • Canon ME-200S SH | User Manual - Page 12
    Names of Parts Bottom view 1 12 2 3 1 Socket for 0.64 cm (1/4") screws 2 Socket for 0.95 cm (3/8") screws (A 26) 3 TB-1 Tripod Adapter Base for tripods with 0.95 cm (3/8") screws (A 26)
  • Canon ME-200S SH | User Manual - Page 13
    Right side view 12 Names of Parts 13 1 Air intake vent (A 65) Left side view 2 Focal plane mark 12 1 Focal plane mark 2 Exhaust ventilation outlet (A 65)
  • Canon ME-200S SH | User Manual - Page 14
    that the remote controller be sent to an accredited Canon Service Center. Shipping and handling charges may apply. Contact a Canon Customer Support Center for details. • When connecting the optional RC-V100 Remote Controller to the camera, make sure that the remote controller's terminal selection
  • Canon ME-200S SH | User Manual - Page 15
    2 Preparations Preparing the Power Supply Preparing the Power Supply You can power the camera using a commercially available external power supply connected to the DC IN 1 terminal (via a commercially available power cable with a female 4-pin XLR connector) or the DC
  • Canon ME-200S SH | User Manual - Page 16
    the Power Supply Using the DC IN 2 Terminal Follow this procedure to prepare a power cable using the supplied power connector and power the camera using the DC IN 2 terminal. DC IN 2 terminal configuration Polarity Signal 16 + 11 to 17 V DC - Ground Terminal type: 2-pin socket ቤ (male
  • Canon ME-200S SH | User Manual - Page 17
    Preparing the Power Supply Turning the Camera On and Off Set the Q switch to ON to turn on the camera and set it to OFF to turn off the camera. • The Q indicator will illuminate in green while the camera is on. However, you can use the [Other Functions] > [Power LED] setting to turn the indicator
  • Canon ME-200S SH | User Manual - Page 18
    Other Functions] > [Frame Rate] and [Audio/Video Setup] > [3G-SDI Mapping] settings are set correctly. • For external monitors that support only 480P or 576P input, connect the camera using the HDMI OUT terminal. • When the output signal is 480P or 576P, onscreen displays will not be superimposed on
  • Canon ME-200S SH | User Manual - Page 19
    may be lost. In such case, recharge the built-in lithium battery (A 67) and set the time zone, date and time again. Similarly, if the camera's settings have been reset, you will need to perform the setup again. • The time indicated on the screen is approximate. • You can display the date
  • Canon ME-200S SH | User Manual - Page 20
    selection frame in the menu. Then, press the joystick itself (in the manual, "press SET") to select the menu item indicated by the selection frame. item that was selected the previous time the menu was closed (unless the camera was turned off). 2 Push the joystick up/down to select the desired
  • Canon ME-200S SH | User Manual - Page 21
    item, additional selections may be necessary. 7 Press the MENU button to close the menu. • Alternatively, if the top-level of the menu (with [Camera Setup], [Custom Picture], etc.) is displayed, you can select [CLOSE]. NOTES 21 • Unavailable items may appear grayed out. • Pressing the MENU button
  • Canon ME-200S SH | User Manual - Page 22
    the Q switch to ON. 3 Press the ABB button. • Alternatively, you can use the [Camera Setup] > [ABB] setting. 4 Select [OK] and then press SET. • The automatic .] appears, press SET. • If the sensor is not completely shielded from light, [ABB error] will appear on the screen. Press SET and repeat the
  • Canon ME-200S SH | User Manual - Page 23
    quickly and in a clean environment free of dust. Refer also to the instruction manual of the lens used. IMPORTANT • When attaching/removing a lens, avoid direct sunlight or strong light sources. Also, be careful not to drop the camera or lens. 23 NOTES • After removing a lens or when a lens is
  • Canon ME-200S SH | User Manual - Page 24
    . • Depending on the lens's characteristics, the corners of the picture may seem darker due to light falloff or illumination drop. You can use the [Camera Setup] > [Periph.Illum.Corr.] setting to have the camera compensate if it has the correction data available for the lens. • If you are using
  • Canon ME-200S SH | User Manual - Page 25
    Overview of Connecting to External Devices There are many ways in which you can configure the camera by connecting external devices. You can connect an external monitor, external recorder, optional RC-V100 Remote Controller or external microphone, as necessary. Refer to the
  • Canon ME-200S SH | User Manual - Page 26
    tripods and accessories with 0.95 cm (3/8") screws. In addition, the camera body itself is equipped with sockets for 0.64 cm (1/4") screws. 26 (1/4") screws for attaching a housing unit IMPORTANT • You can mount the camera on a tripod or similar accessory but do not use accessories with mounting screws
  • Canon ME-200S SH | User Manual - Page 27
    an external monitor and microphone to check that video and audio are being output correctly. Should the camera fail to operate correctly, consult a Canon Service Center. Configuration example External monitor External microphone External recorder DC power supply RC-V100 Remote Controller
  • Canon ME-200S SH | User Manual - Page 28
    red on the screen, the cooling fan may not be working properly. Consult a Canon Service Center. • When you use a commercially available lens adapter and the image on on the shooting screen when an external monitor is connected to the camera's 3G/HD-SDI 1 / MONITOR terminal or HDMI OUT terminal.
  • Canon ME-200S SH | User Manual - Page 29
    , Kelv White balance (A 39). 00000K, ±0 [White Balance] Auto, Manual Camera mode (A 31). [Camera Mode] F0.0, Clsd Aperture value (A 33). [Iris] • [Clsd] displays again. • For external monitors that support only 480P or 576P input, connect the camera using the HDMI OUT teminal. • When
  • Canon ME-200S SH | User Manual - Page 30
    Functions] > [System Frequency] 2 Select the desired option and then press SET. • If you changed the system frequency from the current setting, the camera will restart in the selected system frequency. [Other Functions] [System Frequency] [59.94Hz] or [50.00Hz]* * Depending on the country/region of
  • Canon ME-200S SH | User Manual - Page 31
    adjusting the aperture, gain, shutter speed, ND filter and white balance. Oppositely, when the camera mode is set to [Manual], you can adjust those settings manually. By default, the camera mode is set to [Auto]. As such, the camera mode will be set to [Auto] the first time you use the
  • Canon ME-200S SH | User Manual - Page 32
    32 This section will explain the basics of how to adjust the functions. For specific details, refer to each function's section. 1 Set the camera mode to [Manual] (A 31). 2 Close the menu and then press SET. • One of the adjustable settings will be highlighted in orange on the screen. • The display
  • Canon ME-200S SH | User Manual - Page 33
    as well as select the light metering mode. Manual Aperture 1 Set the camera mode to [Manual] (A 31). [Camera Setup] • On a the aperture. Refer to the instruction manual of the RC-V100 for details on changing that setting.4 • The aperture values set in the camera and displayed on the screen
  • Canon ME-200S SH | User Manual - Page 34
    take control and automatically adjust the aperture for an optimal exposure while you keep the button held down. 1 Set the camera mode to [Manual] (A 31). 2 Set an assignable button to [Push Auto Iris]. [Other Functions] > [Assignable Buttons] > Desired button ([1] to [4 (Remote)]) > [Push Auto Iris
  • Canon ME-200S SH | User Manual - Page 35
    when shooting a scene in which only a certain part of the picture is lit, for example, when the subject is lit by a spotlight. NOTES • When the camera mode is set to [Manual], changing the light metering mode will not affect the exposure. Adjust the exposure
  • Canon ME-200S SH | User Manual - Page 36
    the gain. In such case, you can set an automatic gain control (AGC) limit to prevent the camera from using gain values above the preset limit. 36 Manual Adjustment 1 Set the camera mode to [Manual] (A 31). 2 Press SET. • One of the adjustable settings will be highlighted in orange on the screen
  • Canon ME-200S SH | User Manual - Page 37
    want to set slower shutter speeds for darker environments. 1 Set the camera mode to [Manual] (A 31). 2 Press SET. • One of the adjustable settings will reducing flicker due to shooting under artificial light sources: - When shooting under artificial light sources such as fluorescent, mercury or
  • Canon ME-200S SH | User Manual - Page 38
    camera mode to [Manual] (A 31). 38 • Alternatively, you can leave the camera mode set to [Auto] and change the [Camera Setup] > [ND Mode] setting to [Manual] to be able to adjust manually light by 3 stops (1/8 the amount of light). Reduces the amount of light by 6 stops (1/64 the amount of light).
  • Canon ME-200S SH | User Manual - Page 39
    adjusts the white balance automatically to achieve an optimal level. The camera will adjust the white balance if the light source changes. 1 Set the camera mode to [Manual] (A 31). 2 Press SET. • One of the adjustable settings will be highlighted in orange on the screen. 3 Push the joystick
  • Canon ME-200S SH | User Manual - Page 40
    . • Very rarely and depending on the light source, [WB-A] or [WB-B] may keep flashing (it will change to a slow flashing). The result will still be better than with the auto white balance. Color Temperature/Preset White Balance 1 Set the camera mode to [Manual] (A 31). 2 Press SET. • One of the
  • Canon ME-200S SH | User Manual - Page 41
    White Balance 5 Push the joystick right. • Alternatively, you can press the SET WB button. • Color temperature: On the screen, the default color temperature value (5,500 K) next to the white balance setting will be highlighted in orange. Preset white balance: On the screen, the adjustment value
  • Canon ME-200S SH | User Manual - Page 42
    focuses on the subject at the center of the screen. * Not available when a manual focus lens or a CN20x50 IAS H/E1 lens is attached to the camera. Focusing methods and required settings Focusing method Manual focus Focus ring FOCUS dial on an optional RC-V100 Remote Controller connected to the
  • Canon ME-200S SH | User Manual - Page 43
    an optional RC-V100 Remote Controller is connected to the camera, you can adjust the focus with the remote controller's FOCUS dial. At default settings, turn the dial right to focus farther and left to focus nearer. Refer to the instruction manual of the RC-V100 for details on changing that setting
  • Canon ME-200S SH | User Manual - Page 44
    a "focus limit" range for the attached lens, which will cause the camera to try to autofocus (with one-shot AF) on subjects only within desired position for the near end of the range. 5 Open the [Near] focus limit submenu. [Camera Setup] > [Focus Limit] > [Near] • When a focus limit has not been set,
  • Canon ME-200S SH | User Manual - Page 45
    AF has stopped working or cannot be used, [C. AF] will turn gray. NOTES • When shooting in dark surroundings with the camera mode set to [Auto], the camera may keep endlessly trying to focus unsuccessfully. You can set [AF Mode] to [Continuous (Auto Off)] to deactivate the autofocus function
  • Canon ME-200S SH | User Manual - Page 46
    Canon Web site for the latest information. • Autofocus may not work well on the following subjects or in the following cases. In such case, focus manually. - Reflective surfaces - Subjects with low contrast or without vertical lines - Fast moving subjects - Through dirty or wet windows - Low-light
  • Canon ME-200S SH | User Manual - Page 47
    Aspect Markers Aspect Markers The camera offers 4 types of onscreen markers that indicate the following commonly-used aspect ratios: 4:3, 1.66:1, 1.85:1 and 2.39:1. Use the aspect markers to make sure the
  • Canon ME-200S SH | User Manual - Page 48
    , gain, shutter speed, focus White balance Available when the camera mode is set to [Manual]. Available only by using the [Custom Picture] > [Fine Tuning] > [White Balance] setting when a custom picture file is selected. ND filter Light metering Cannot be changed (turned off). Cannot be changed
  • Canon ME-200S SH | User Manual - Page 49
    camera on and off and navigating the menu, you can control various shootingrelated functions, such as aperture, shutter speed, and custom picture settings, like knee and sharpness. For details on how to connect and use the remote controller, refer to its instruction manual. Visit your local Canon
  • Canon ME-200S SH | User Manual - Page 50
    needs and preferences. When an optional RC-V100 50 Remote Controller is connected to the camera, you can use a fourth assignable button. The names of the buttons printed on the camera also indicate the buttons' default settings. Changing the Assigned Function 1 Open the [Assignable Buttons] submenu
  • Canon ME-200S SH | User Manual - Page 51
    . 48 [External Rec]* Outputs a recording command to an external recorder to start or stop recording. 57 [Custom Picture] Opens the [Custom Picture] submenu. 52 [Camera Mode A/M] Switches the camera mode between [Auto] and [Manual]. 31 * Function can be used only by assigning it to a button.
  • Canon ME-200S SH | User Manual - Page 52
    NOTES • Custom picture files are exclusively compatible for use only with ME200S-SH cameras. Selecting Custom Picture Files Select a custom picture file to apply that nevertheless do not require post-production processing. [Canon Log]: Uses the Canon Log gamma and color matrix for an outstanding
  • Canon ME-200S SH | User Manual - Page 53
    or one of the preset settings ([EOS Std.], [Wide DR] or [Canon Log]) if you want to replicate these preset settings, for example as a starting [EOS Std.]: This gamma curve approximates the look of an EOS digital SLR camera when the picture style is set to [Standard] P. Produces higher contrast than
  • Canon ME-200S SH | User Manual - Page 54
    (dark areas of the image). When [Gamma] is set to [Wide DR] or [Canon Log], this setting has no effect on the picture. This setting can be adjusted from . When [Gamma] is set to [EOS Std.], [Wide DR] or [Canon Log], this setting has no effect on the picture. [Activate]: Activates/deactivates
  • Canon ME-200S SH | User Manual - Page 55
    tones. This setting can be adjusted from -50 to 50. (Default: ±0) NOTES • When an optional RC-V100 Remote Controller is connected to the camera, the following custom picture settings can be changed using the buttons and dials on the remote controller. - [Black] > [Master Pedestal], [Master Black
  • Canon ME-200S SH | User Manual - Page 56
    Customizing Onscreen Displays Customizing Onscreen Displays Custom displays allow you to choose whether individual onscreen displays will appear on the shooting screen. For details on which onscreen displays can be customized, refer to Onscreen Displays (A 28). 1 Open the [Custom Display] submenu.
  • Canon ME-200S SH | User Manual - Page 57
    external recorder. For details on compatible external recorders, consult the 57 retail dealer from whom you purchased the camera or contact a Canon Service Center. For details on connecting the camera to an external monitor, refer to Connecting to an External Monitor (A 18). 3G/HD-SDI input BNC
  • Canon ME-200S SH | User Manual - Page 58
    Connecting to an External Recorder • While a recording command is being output, the following settings are not available to be changed. - [Camera Setup] > [ABB] - [Audio/Video Setup] > [3G-SDI Mapping], [Rec Command] - [Other Functions] > [Reset], [Time Zone], [Set Clock] > [Date/Time], [Assignable
  • Canon ME-200S SH | User Manual - Page 59
    within approximately 10 seconds. • When a suitable Genlock signal is detected, [Gen.] will flash on the upper right of the screen. When the camera locks on the external Genlock signal, [Gen.] will stop flashing and stay on. • If the external Genlock signal is incorrect, the synchronization may
  • Canon ME-200S SH | User Manual - Page 60
    then press SET. [MIC Power] [Off] IMPORTANT • Supplying power to a microphone without plug-in power functionality may damage the microphone. Audio Output The camera features 2-channel linear PCM audio output. The sampling frequency is 48 kHz and the audio bit depth is 16 bit. The audio from the
  • Canon ME-200S SH | User Manual - Page 61
    ] menu A 64 [Other Functions] menu A 64 [Camera Setup] menu Menu item [Light Metering] [AE Shift] [AE Response] [AGC Limit] darken or lighten the image (A 34). [High], [Normal], [Low] Determines how quickly the aperture changes when the camera mode is set to [Auto] or when you are using push
  • Canon ME-200S SH | User Manual - Page 62
    unreliable focus operations. When continuous AF has stopped working, [C. AF] will appear in gray. This setting has no effect when the camera mode is set to [Manual]. [Focus Limit] [Activate] [On], [Off] Turns the focus limit on/off (A 44). [Far] [Set], [Reset], [Cancel] Allows you to set the
  • Canon ME-200S SH | User Manual - Page 63
    mode is set to [Auto]. [Automatic]: The ND filter is adjusted automatically by the camera. [Manual]: The ND filter can be adjusted manually (A 38). [On], [Off] When this setting is set to [On] and the camera has correction data for the attached lens, it compensates for the darkening of the image
  • Canon ME-200S SH | User Manual - Page 64
    options [Off], [CP1] to [CP6], [EOS Std.], [Wide DR], [Canon Log] Selects a custom picture file to apply its settings while shooting or to edit Setting options [On], [Off] When this setting is set to [On], the camera supplies power to a plug-in power microphone connected to the MIC terminal (A 60).
  • Canon ME-200S SH | User Manual - Page 65
    button's function can be assigned without connecting the RC-V100 to the camera. [Power LED] [On], [Off] Allows you to set whether the Q indicator illuminates while the camera is on. [Fan Speed] [Automatic], [High], [Middle], [Low] Sets the cooling fan's speed. If you select [Automatic], the
  • Canon ME-200S SH | User Manual - Page 66
    SET to move to the next field. You can press MENU to delete a character. When finished, select [Set] and then press SET. [Cancel], [OK] The camera has two "hour meters" - the first keeps track of total operation time and the second keeps track of operation time since the last time the
  • Canon ME-200S SH | User Manual - Page 67
    -SERVO lens (A 71) is firmly attached to the camera blocking light from entering the camera. Next, perform the operation again. If that does not solve the problem, consult a Canon Service Center. Built-in Rechargeable Lithium Battery The camera has a built-in rechargeable lithium battery to keep the
  • Canon ME-200S SH | User Manual - Page 68
    dirt particles using a non-aerosol type blower. • Use a clean, soft lens-cleaning cloth to gently wipe the lens. Never use tissue paper. Condensation Moving the camera rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its internal surfaces. Stop using the
  • Canon ME-200S SH | User Manual - Page 69
    USA: Call or visit your local retailer/dealer for genuine Canon video accessories. You can also obtain genuine accessories for your Canon camera by calling: 1-800-828-4040, Canon U.S.A. Information Center. Use of genuine Canon accessories is recommended. This product is designed to achieve excellent
  • Canon ME-200S SH | User Manual - Page 70
    Specifications ME200S-SH System 70 • Image Sensor Super-35mm-equivalent CMOS sensor Effective pixels (approximate): 8,290,000 pixels • Subject Illumination (56 dB, with an f/1.2 lens) 59.94 Hz: 0.021 lux (29.97P, shutter speed 1/30) 50.00 Hz: 0.018 lux (25.00P, shutter speed 1/25) • Lens Mount Canon
  • Canon ME-200S SH | User Manual - Page 71
    following Canon Cinema lenses are compatible with this camera: CN7x17 KAS S/E1 CN20x50 IAS H/E1* * Does not support autofocus functions Weight (camera body only): 1,000 g (2.2 lb.) Weight and dimensions are approximate. Errors and omissions excepted. The information in this manual is verified
  • Canon ME-200S SH | User Manual - Page 72
    Appendix: Physical Measurements Appendix: Physical Measurements Back view 36.5 mm (1.4 in.) 72 29 mm (1.1 in.) 20 mm (0.79 in.) 40.5 mm (1.6 in.) 19.5 mm (0.77 in.) Front view 28.5 mm (1.1 in.) 38.8 mm (1.5 in.) 102 mm (4.0 in.) 1 mm (0.04 in.) 116 mm (4.6 in.) Top view 52.8 mm (2.1 in
  • Canon ME-200S SH | User Manual - Page 73
    Appendix: Physical Measurements Bottom view Right side view ∅ 5.4 mm (5.6 mm deep) (0.22 in. deep) 27.9 mm (1.1 in.) 65 mm (2.6 in.) 9 mm deep* (0.35 in. deep) 10 mm deep** (0.39 in. deep) 73 4.7 mm (8.5 mm deep) (0.33 in. deep) 7 mm deep* (0.28 in. deep) 14 mm (0.55 in.) 7.5 mm (0.30 in.) 51
  • Canon ME-200S SH | User Manual - Page 74
    61 AWB (auto white balance 39 B Black balance 22 C Camera mode 31 Canon Log (preset custom picture 52 CINE-SERVO lenses 22, 24, Infrared mode 48 Iris 33 J Joystick 20 L Lens 23 LENS terminal 23 Light metering mode 35 M Menu settings 61 MIC terminal 60 Microphone (external 60 Monitor
  • Canon ME-200S SH | User Manual - Page 75
    S Shooting video 27 Shutter speed 37 Specifications 70 Synchronization 59 System frequency 30 T Tripod 26 Turning the camera on/off 17 V Video configuration 30 W White balance 39 Wide DR (preset custom picture 52 75
  • Canon ME-200S SH | User Manual - Page 76
    USA &N Z CANON MULTI-PURPOSE CAMERA EQUIPMENT LIMITED WARRANTY FOR PRODUCTS PURCHASED IN THE UNITED STATES The Limited Warranty set forth below is given by Canon U.S.A., Inc. ('Canon USA') with respect to the Canon multipurpose camera (the "Product") when purchased and used in the United States.
  • Canon ME-200S SH | User Manual - Page 77
    PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE PRODUCT NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF CANON USA.THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT OR THE PERSON FOR WHOM IT WAS PURCHASED AS
  • Canon ME-200S SH | User Manual - Page 78
    set forth below is given by Canon Canada Inc. ('Canon Canada') with respect to the Canon multi-purpose camera (the "Product") when purchased instructions prescribed in Canon user's manual; (b) Defects or damage caused by sand, dirt or water, or by service other than Canon Canada's Factory Service
  • Canon ME-200S SH | User Manual - Page 79
    PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE PRODUCT NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF CANON CANADA. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT OR THE PERSON FOR WHOM IT WAS PURCHASED AS
  • Canon ME-200S SH | User Manual - Page 80
    020-7660-0186 USA http://pro.usa.canon.com CANON U.S.A., INC. http://pro.usa.canon.com/support 800-OK-CANON (800-652-2666) (USA only). Visit your local Canon Web site to download the latest version of this Instruction Manual. Consultez le site Web local de Canon pour télécharger la version la plus
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
PUB. DIM-1169-000
Multi-Purpose Camera
Instruction Manual
Caméra polyvalente
Mode d’emploi
English
Français