Canon MF5750 imageCLASS MF5730 Set-Up Instructions
Canon MF5750 - ImageCLASS B/W Laser Manual
 |
UPC - 013803045031
View all Canon MF5750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon MF5750 manual content summary:
- Canon MF5750 | imageCLASS MF5730 Set-Up Instructions - Page 1
for purchasing Canon imageCLASS MF5730. To get your machine ready for use, please follow the instructions in this document before referring to any other documentation. Unpack the machine and its components. Check that you have the following: ● Cartridge ● Cassette extension ● Machine ● Extension - Canon MF5750 | imageCLASS MF5730 Set-Up Instructions - Page 2
open the front cover. A 5 Hold the cartridge so that the instructions (A) and the arrow (B) are facing up, and insert it in the machine horizontally as far as it will go. 6 Close the front cover of the machine. Assemble the cassette and load paper. B A 1 Hold the document feeder (A) with one - Canon MF5750 | imageCLASS MF5730 Set-Up Instructions - Page 3
° angle. Once inserted, fold the extension as shown ➋. 4 Pinch and slide the rear paper end guide to match the size of paper. NOTE ● Confirm that the paper guide is fitted in the paper size slit correctly. To load Legal-size paper: Pull the blue tab ➊ and extend the cassette ➋ as far as it will go - Canon MF5750 | imageCLASS MF5730 Set-Up Instructions - Page 4
(A) and that the side edges of the stack are below the hooks (B). 8 Insert the paper cassette back into the machine as far as it will go. NOTE ● If you do not completely insert the cassette into the machine, paper jams may occur. IMPORTANT ● Do not push in the cassette at an angle. Doing so may - Canon MF5750 | imageCLASS MF5730 Set-Up Instructions - Page 5
appears in the LCD. IMPORTANT ● For important safety instructions on installation and handling of the machine, see "Important Safety Instructions" in the Basic Guide. NOTE ● Make sure the correct paper size is specified in the machine. For details, see Chapter 2,"Paper Handling," in the Basic - Canon MF5750 | imageCLASS MF5730 Set-Up Instructions - Page 6
, go back to the previous screen by clicking [Back], and select [USB Connection]. NOTE ● The instructions below are for Windows XP/Server 2003. For Windows 98/Me/2000, see the Software Guide (included in the User Software CD). ● For Windows 2000/XP/Server 2003, log on as Administrator to install the - Canon MF5750 | imageCLASS MF5730 Set-Up Instructions - Page 7
the MF Toolbox-Setup Wizard screen appears, click [Next] and follow the instructions on the screen. NOTE ● Before installing MF Toolbox, make sure that all other applications are closed and that any anti-virus software on your computer is disabled. 11 When the installation is complete, click [Exit - Canon MF5750 | imageCLASS MF5730 Set-Up Instructions - Page 8
driver software, see the Software Guide (included in the User Software CD). NOTE ● Remember to register your machine to ensure product support. The serial number is located on the back of the machine. For installation help and operational instructions, call us at: 1-800-828-4040 1-800 OK CANON
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Set-Up Instructions
Set-Up Instructions
Thank you for purchasing Canon imageCLASS MF5730.
To get your machine ready for use,please follow the instructions in this document before referring to any other documentation.
Unpack the machine and its components.
Check that you have the following:
●
Machine
●
Cartridge
NOTE
●
The cartridge included with the machine is Cartridge X25 that yields approximately 2,500 pages of printouts (Letter at 4%
dot coverage).
Before setting up the machine:
1
Place the machine on a flat, stable surface.
2
Remove
all
shipping tape from the
exterior
of the machine.
Referring to the following figure, remove the tape and spacers on both sides of the
cassette housed in the machine.
●
Cassette extension
●
Extension cover
●
Power cord
●
USB cable
●
Set-Up Instructions
●
Basic Guide
●
Warranty
●
Limited Warranty Note for Cartridge X25
●
Registration Card
●
MF5700 Series User Software CD-ROM