Canon MP210 MP210 series Easy Setup Instructions

Start Here

Easy Setup Instructions

Important

When moving the machine, carry the machine at both ends as shown below. Do

not lift the machine by grasping the Paper Support Extension.

a

Place the machine on a flat and horizontal surface, and do not

place any objects in front of the machine.

Remove all the shipping tapes and protective material on the outside of the

machine.

Then open the Paper Output Tray.

b

Lift the Scanning Unit (Printer Cover), and pull the Scanning Unit

Support down into place.

Scanning Unit (Printer Cover)

c

Remove the protective material on the right side.

Protective Material

Caution

Before turning on the machine, remove all of the shipping tapes.

1

Prepare the Machine

d

Lift the Scanning Unit (Printer Cover) slightly to set the Scanning

Unit Support back to its original position, and then gently close

the Scanning Unit (Printer Cover).

e

Plug the power cord in the back of the machine and connect the

other end to the wall outlet.

Power Cord

Document Cover

Important

Make sure that the Document Cover is closed.

Note

Do NOT connect the USB cable at this stage.

f

Press the

ON/OFF

button to turn on the machine. The machine

will initialize. Wait until the

Power

lamp stops flashing and

remains lit green.

g

Lift the Scanning Unit (Printer Cover), and pull the Scanning

Unit Support down into place. The FINE Cartridge Holder

automatically moves to the left.

Scanning Unit (Printer Cover)

h

Write down the serial number located inside the machine. You

will need this to register your product.

Serial Number

2

Install the FINE Cartridges

a

Remove the Black FINE Cartridge from its box.

b

Remove the protective tape gently.

Protective Tape

Print Head Nozzles

Electrical Contacts

Important

Do not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge.

The machine may not print out properly if you touch it.

Do not reattach the protective tape once you have removed it.

Be careful not to stain your hands or surrounding work area with ink on the

removed protective tape.

c

Insert the Black FINE Cartridge slightly slanted into the left slot

B

.

•

•

•

d

Push up the FINE Cartridge until it clicks into place.

Important

For correct machine operation, make sure the FINE Cartridge is securely inserted.

Click

e

Repeat the procedure for the Color FINE Cartridge, inserting it

into the right slot

C

.

f

Lift the Scanning Unit (Printer Cover) slightly to set the Scanning

Unit Support back to its original position, and then gently close

the Scanning Unit (Printer Cover).

Important

Once you have installed the FINE Cartridges, the LED will flash green. Wait until

the LED stops flashing and displays 1. It takes about one to two minutes.

Hardware setup is complete.

Photo All-in-One

QT51206V01

Unpack the Machine

Please confirm the included items against the illustration printed on the lid of the packing box.

A USB cable is necessary to connect the machine with your computer.

•

•

Important

When cleaning the exterior of the machine, use a soft cloth to wipe it gently. For details, refer to “Cleaning Your Machine” in the

Quick Start Guide

.