Canon MultiPASS F20 MultiPASS F20 Setup Sheet
Canon MultiPASS F20 Manual
 |
View all Canon MultiPASS F20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon MultiPASS F20 manual content summary:
- Canon MultiPASS F20 | MultiPASS F20 Setup Sheet - Page 1
Canon MultiPASS F20. To get your machine ready for use, please follow the instructions Ink tanks (Black, color) l Printhead l PCMCIA card adapter l Power cord l Documentation (Set-Up Sheet, Basic Guide, Registration Card, Extended Service Plan) l MultiPASS Suite software CD-ROM NOTE • A printer - Canon MultiPASS F20 | MultiPASS F20 Setup Sheet - Page 2
ON/OFF] to turn A should appear in the LCD. on the machine. PLEASE WAIT Co Approx. 30 seconds PUT IN CARTRIDGE NOTE • Please note that the cartridge (printhead and ink tanks) is installed in steps 5 and 6. Attach the multi-purpose tray and load paper. 1 Insert the tabs on the bottom edge of the - Canon MultiPASS F20 | MultiPASS F20 Setup Sheet - Page 3
up the tray extension. 3 Place a stack of paper (print side up) in the multi-purpose tray q and adjust the paper guide A to the width of the stack w. Make sure the stack does not exceed the paper limit mark B. q w A B NOTE • When you are not printing, remove the paper stack from the multi-purpose - Canon MultiPASS F20 | MultiPASS F20 Setup Sheet - Page 4
Install the printhead. IMPORTANT • To turn off the machine, be sure to always press [ON/OFF]. This will ensure that the printhead is capped and prevent it from drying up. • If you are not using the machine for a long period of time, we recommend that you print (in black and color) or clean the - Canon MultiPASS F20 | MultiPASS F20 Setup Sheet - Page 5
black ink tank into the right hand slot. Press firmly on the ink tank's tab until it clicks into place. BCI-24 Black BCI-24 Black 3 Repeat steps 1 and 2 to install the color ink tank in the left hand slot. BCI-24 Color BCI-24 Black 4 Close the inner cover. Be sure to now align the printhead as - Canon MultiPASS F20 | MultiPASS F20 Setup Sheet - Page 6
• If you will be installing the MultiPASS Suite software, you can also align the printhead from the software. For details, see p. 9-7 of the Basic Guide. 1 When the LCD A displays the following, press [Set]. ALIGN PRINT HEAD A PRESS SET KEY The machine will print a horizontal line pattern, and - Canon MultiPASS F20 | MultiPASS F20 Setup Sheet - Page 7
98/Me users: You need to have "Client for Microsoft Networks" installed before installing the MultiPASS Suite software. For details, refer to p. 10-1 of the Basic Guide. • When installing the software in Windows XP or Windows 2000, log onto the system as a member of the Administrator group. • If - Canon MultiPASS F20 | MultiPASS F20 Setup Sheet - Page 8
on all functions of your machine. For comprehensive instructions on the MultiPASS Suite software, refer to the Software Guide (included in the CD-ROM). Part no. HT3-2117-000-V.2.0 © 2002 Canon Inc. Canon, MultiPASS, and BCI are trademarks of Canon Inc. All other products and brand names are
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Set-Up Sheet
Set-Up Sheet
Unpack the machine and its components.
Check that you have the following:
NOTE
• A printer cable is not included.You must purchase a USB cable (less than 16
# /
8
ft./5 m) to
connect your machine to a computer.
Black
BCI-24
Made in Japan
BCI-24
Made in Japan
Color
Machine
Multi-purpose tray
Printhead
PCMCIA card adapter
Ink tanks
(Black, color)
Power cord
Documentation
(Set-Up Sheet, Basic Guide,
Registration Card,
Extended Service Plan)
MultiPASS Suite software CD-ROM
Thank you for purchasing the Canon MultiPASS F20.
To get your machine ready for use, please follow the instructions in this Set-Up Sheet
before referring to any other documentation.
READ THIS SHEET FIRST
READ THIS SHEET FIRST