Canon MultiPASS F30 Reference Guide for the MultiPASS F30 and MultiPASS F50
Canon MultiPASS F30 Manual
View all Canon MultiPASS F30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon MultiPASS F30 manual content summary:
- Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 1
the MultiPASS from your PC MultiPASS Fax Guide F50 model only MultiPASS Suite for Windows® Software User's Guide Documentation is included on the CD-ROM in PDF form. • The machine shown in this guide is the F50 model. NOTE Copyright Copyright © 2001 by Canon, Inc. All rights reserved. No part of - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 2
Cleaning Inside the Machine 5-2 Cleaning the Roller 5-3 Cleaning Inside the ADF (F50 Model Only)...5-3 Ink Tanks 5-4 Guidelines 5-4 When to Replace an Ink Tank 5-5 Replacing an Ink Tank 5-6 Testing and Cleaning the Printhead 5-7 Printing the Nozzle Check Pattern 5-8 Cleaning the Printhead - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 3
details on the topic of the previous sentence. Refer to the MultiPASS Suite for Windows® Software User's Guide for details on the topic of the previous sentence. The word "machine" is the general term used to represent the MultiPASS F50/F30. A setting that remains in effect unless you change it. The - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 4
problem or if you think your machine needs servicing, contact the Canon Customer Care Center. (1-800-4232366) 1 Important Safety Instructions Read these safety instructions contact with electrical parts inside the is strong enough to support its weight (approx. 27.3 lb./12.4 kg [F50 model] / 22 - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 5
outlet, unplug the machine and wipe the plug with a clean, dry cloth. • For using the F50 model, do not plug the machine into the same circuit instructions in the guides included with your machine. Adjust only those controls that are covered by the instructions in the guides need for servicing. 1-2 - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 6
items come into contact with high-voltage parts inside the machine, it may result servicing. I Maintenance • Do not service the machine yourself except as specifically described in this guide. If further WARNING servicing is required, contact the Canon Customer Care Center. • Keep the machine clean - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 7
GUIDES Adjust to the width of the document. MULTI-PURPOSE TRAY and TRAY COVER Holds plain paper and other print Printhead (Cartridge) and Ink Tanks. OPEN BUTTON Push to lift up the scanning unit. OUTPUT TRAY Holds printed pages as they exit the machine. Inside View PLATEN GLASS HOLDER * F50 - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 8
F50 model. ON/OFF Button Turns the machine on/off. Resume Button Resumes printing after an error is corrected. Also ejects a jammed document from the ADF.* LCD Displays messages of scanning, → MultiPASS Suite User's Guide. Color/B&W Button Sets the machine for color or black & white copying. For - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 9
on which mode is selected. The standby display in Copy Mode and Scan Mode are as follows: • The standby display in Fax Mode is, → Fax Guide. NOTE I Copy Mode Copy Ratio Paper Size Image Quality Exposure Paper Type Copy Quantity • When the machine is turned on, the Copy Mode standby display - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 10
, postcards) - Special types of paper - Book Max. 8.5 × 11.7 in. ** (Max. 216 × 297 mm) Quantity Thickness Weight --- Max. 0.79 in. (20 mm) --- ADF (F50 model only) Multipage documents of the same thickness and weight. 2 Max. 8.5 × 39 in. (Max. 216 × 1 m) Min. 4.13 × 5.83 in. (Min. 105 × 148 mm - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 11
Problem Documents • Make sure any glue, ink, or correction fluid on the document . 4.5 mm) MAX. 0.18" (MAX. 4.5 mm) * When using legal-size documents with the F50 model, load them into the ADF. ** F50 model only *** When using legal-size documents with the F30 model, the bottom margin is MAX. 0.32 - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 12
upper left corner of your document with the mark at the upper left corner of the guide plate. Use the guide plate on the upper side and left side of the platen glass to position a document. I F50 Model I F30 Model B5 LTR A4 B5 LTR A4 LGL B5 B5 A4 A4 LTR LTR - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 13
Loading Documents into the ADF (F50 Model Only) 1 Make sure there is no document on the then, tap the edge of multipage documents on a flat surface to even the stack. 3 Adjust the document guides to the width of the document. The document is now ready for scanning. • For a multipage document, - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 14
Requirements Paper Types and Sizes This section describes the different print media you can use with your machine. To achieve the best possible printing performance of your machine, be sure to select the correct print media. Print Media Plain paper Size Letter (8.5 × 11 in. / 215.9 × 279.4 mm - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 15
The machine can print on U.S. Commercial No. 10 and European DL envelopes. You may be able to load other sizes, but Canon cannot guarantee consistent performance on these. Do not use the following types of envelopes since they may cause problems: • Envelopes with windows, holes, perforations - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 16
for long periods of time since it may bend or curl and cause problems. • Certain environmental conditions, such as extreme temperatures or humidity, can cause some print media to misfeed in the multi-purpose tray. If you have trouble, feed one sheet at a time. • Depending on the density of the - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 17
area where the machine can technically print. Printing area (light shade) : Canon recommends that you print within this area. Printable area (dark shade) : The area in which it is possible to print. However, printing in this area can adversely affect the print quality or the paper feed precision - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 18
Loading Paper Refer to the Quick Start Guide to load plain paper in the multi-purpose tray. Loading Envelopes 1 Push the Open button and lift up the scanning unit. 3 Arrange the stack of envelopes on a firm, clean surface, and press down firmly on the edges to make the folds crisp. • Press all the - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 19
the right edge of the stack with the right side of the multipurpose tray. Pinch the paper guide, then slide it snugly against the left edge of the stack ➁. • Insert the envelopes with the print side up (flaps should not be visible). • Feed the left side of the envelope (return address portion - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 20
Media Guidelines • Be sure to read all instructions that come with your Canon specialty print media, as these provide NOTE important information on how to achieve the highest print quality. Follow these guidelines: • When feeding Transparencies, remove each sheet after it is delivered, being - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 21
required. For best results, use Canon Banner Paper. You can print banners from two to six ink from running over the edges of the sheet, print within the margins shown above. NOTE • Printing on Banner Paper may require considerable amounts of ink, so use new Ink Tanks if necessary. • For best print - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 22
5 Remove the tray cover and the multipurpose tray. 7 Set your PC to print on the Banner Paper. • Allow the paper to flow over the edge of the insert the first sheet 3 and press gently down on the sheet ➀. Pinch the paper guide, then slide it snugly against the left edge of the stack ➁. 2 1 • - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 23
platen glass or load it into the ADF. (→ pp. 2-3, 2-4) 3 To make a black & white copy, make sure the Color/B&W light is off. To make a color copy the F50 model, you will be unable to make multiple copies if MEMORY FULL appears in the LCD. Print or delete any documents stored in memory (→ Fax Guide) - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 24
Making Multiple Copies You can make multiple copies. 1 Use the numeric buttons to enter the number of copies you want. 05 100% LTR TEXT Ex: PLAIN • You can make up to 99 copies. • During copying, the LCD displays the NOTE remaining number of copies to be made. COPYING Ex: 05 Setting Paper - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 25
Setting Enlarging/Reducing You can enlarge or reduce the copy size using preset copy ratios or using custom copy ratios. I Enlarging/Reducing using preset copy ratios 1 Press Enlarge/Reduce. PRESET RATIO Ex: - 100% + 3 Press Set. 01 78% LTR TEXT Ex: PLAIN 2 Use F or E to select the copy - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 26
have a jagged appearance, while higher resolutions provide smoother curves and lines, crisp text and graphics, and a better match to traditional paper type setting. (→ p. 4-2) 3 Press Set. 01 100% LTR PHOTO Ex: PLAIN (black & white mode) 01 100% LTR FINE Ex: PLAIN (color mode) • When using - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 27
to the default setting. Repeating an Image over the Paper Use IMAGE REPEAT to print multiple copies of an image on a single sheet. You can select the AB The scanned area of a document depends on the paper size to be printed on and the number of times which it is repeated. • The examples below - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 28
1 Press Copy to set Copy Mode. 2 Prepare the document and place it on the platen glass or load it into the ADF. (→ pp. 2-3, 2-4) 3 To make a black & white copy, make sure the Color/B&W light is off. To make a color copy, press Color/B&W to turn on its light. 7 Use F or E to select the - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 29
Image Use MIRROR IMAGE to print a mirror image of the original. 1 Press Copy to set Copy Mode. 5 Press Menu. 2 Prepare the document and place it on the platen glass or load it into the ADF. (→ pp. 2-3, 2-4) MENU 1.SPECIAL COPY 6 Press Set. 3 To make a black & white copy, make sure SPECIAL - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 30
. 1 Press Copy to set Copy Mode. 2 Prepare the document and place it on the platen glass or load it into the ADF. (→ pp. 2-3, 2-4) 3 To make a black & white copy, make sure the Color/B&W light is off. To make a color copy, press Color/B&W to turn on its light. 4 Set copy features if you - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 31
the machine. CAUTION • For the F50 model, print any documents stored in memory before disconnecting the power cord, since documents in memory are erased when the power is disconnected. (→ Fax Guide) • Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to the - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 32
and lift up the scanning unit. 3 Use a clean, soft, dry, lint-free cloth to remove any ink or paper debris from the machine's interior (shaded area), especially around the platen and pinch roller. • Be careful not to touch the Printhead (Cartridge) or its holder. PINCH ROLLER PLATEN ROUND SHAFT - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 33
. MENU Ex: 7 . P R I N T E R S E T T I N G S 3 Press Set twice. PRINTER SETTINGS 1.CLEANING 4 Use F or E to select ROLLER CLEANING. CLEANING 4.ROLLER CLEANING 5 Press Set. • The machine cleans the roller. CLEANING 1.NOZZLE CHECK Cleaning Inside the ADF (F50 Model Only) 1 Turn off the power and - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 34
and to avoid printing problems, Canon recommends that you only use the NOTE Canon Ink Tanks described in this guide. There are four Ink Tanks: Black, cyan, magenta, and yellow. BCIIn-3k eTBanKk BCInI-k3TeaCnk BCIIn-k3TeaMnk BCInI-k3TeaYnk Ink Tank BCI-3eBK Ink Tank Ink Tank Ink Tank BCI-3eC - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 35
Black Ink Tank is empty.) If more than one Ink Tank is empty, several letters may appear (e.g. C Y INK EMPTY). When one or more of the above messages appear in the LCD, replace the Ink Tank(s) as described later in this chapter. If no message appears, refer to the flow chart to determine the problem - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 36
slot. • Do not remove the Printhead (Cartridge) CAUTION from the machine. • Do not remove several Ink Tanks together. Remove and replace each one individually to ensure that they are inserted in the correct slot. Inserting them in the wrong slot will cause colors to print incorrectly. • The holder - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 37
printed. The printhead is misaligned. 2 Perform normal printhead cleaning (HEAD CLEANING setting). (→ p. 5-8) You can perform normal printhead cleaning up to three times. 2 Align the printhead. (→ Quick Start Guide) The pattern is not improved. 5 Maintenance 3 Perform deep printhead cleaning - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 38
Guide. If lateral lines are visible, → Quick Start Guide. Cleaning the Printhead If the printed nozzle check pattern is broken, missing, or a specific color is not printed, clean the printhead. • Cleaning the printhead consumes a small amount of ink. Cleaning too often reduces the amount of ink - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 39
Gently pull any jammed paper out of the paper output. 2 Press Resume to start the operation again. • If you are printing from a Windows® application, follow the instructions displayed by the software on your PC. 6 • If you cannot see any jammed paper in the paper output, remove it from the inside - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 40
unit and turn on the power. 5 Press Resume to start the operation again. • If you are printing from a Windows® application, follow the instructions displayed by the software on your PC. Jams in the ADF (F50 Model Only) When a document is jammed or misfed in the ADF, the LCD displays DOC.TOO LONG - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 41
copying or sending, remove the other NOTE documents from the ADF, and then press Resume. The jammed document in the ADF will be ejected automatically. 6-3 Troubleshooting - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 42
Reinstall the Printhead (Cartridge) (→ Quick Start Guide) and start again. In either case, if the error does not clear, try turning off the power. Wait several minutes, then turn on again. The waste ink tank (which holds the ink used for printhead cleaning) may be full. Contact the Canon Customer - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 43
will resume printing when it has cooled down. WRONG CARTRIDGE The Printhead (Cartridge) isn't installed correctly. Retry to install the Printhead (Cartridge). Y INK EMPTY The Yellow Ink Tank in the Printhead Replace the Ink Tank. (→ p. 5-6) (Cartridge) is empty. 6 Troubleshooting 6-5 - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 44
Problems ❚ Paper does not feed correctly. The multi-purpose tray may contain too many sheets. • Make sure the paper stack in the multi-purpose tray does not exceed the paper limit mark (t| ). (→ Quick Start Guide Start Guide) • Check that the paper you are using and your printing environment are within the specifications - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 45
European DL envelopes. (→ p. 3-1) • For additional troubleshooting, → MultiPASS Suite User's Guide. NOTE Copying Problems ❚ The machine will not make a copy. One or more Ink Tanks in the installed Printhead (Cartridge) may be empty. • Check for an error message in the LCD (→ p. 6-4) and replace if - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 46
be empty. • Check for an error message in the LCD (→ p. 6-4) and replace if necessary. (→ p. 5-6) You may not have aligned the printhead after installing a new Printhead (Cartridge). • Align the printhead. (→ Quick Start Guide) ❚ The printout contains blurred or smudged ink. The print media you are - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 47
and clean the printhead if necessary. (→ p. 5-8) One or more Ink Tanks in the installed Printhead (Cartridge) may be empty. • Check for an error message in the LCD (→ p. 6-4) and replace if necessary. (→ p. 5-6) • For additional troubleshooting, → MultiPASS Suite User's Guide. NOTE Printing Problems - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 48
and aligned correctly. (→ Quick Start Guide) • If the printhead prints on the platen, clean the ink off the platen by launching Notepad and setting the NOTE application to print 2 or 3 blank sheets of paper. ❚ The machine suspends printing after each line. The printhead may have become too hot. If - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 49
another, or by using a voltmeter to test it for continuity. ❚ The machine will not print reports. The Black Ink Tank of the installed Printhead (Cartridge) may be empty. • Check for an error message in the LCD (→ p. 6-4), and replace if necessary. (→ p. 5-6) ❚ Nothing appears in the LCD. The power - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 50
differ depending on the machine type (F50 or F30 model) and the current PRINTER SETTINGS Menu 1. CLEANING 2. ALIGN PRINT HEAD 3. BOTTOM MARGIN Set 8. SYSTEM SETTINGS 1. DISPLAY LANGUAGE 2. AUDIBLE TONES For details on these menus, → following pages. For details on these menus, → Fax Guide - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 51
normal printhead cleaning. (→ p. 5-8) - Performs deep printhead cleaning. (→ p. 5-8) - Performs roller cleaning. (→ p. 5-3) - 2.ALIGN PRINT HEAD Aligns the vertical and lateral print position of - the printhead. (→ Quick Start Guide) VERT LINE PATTRN Prints the vertical line pattern - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 52
SYSTEM SETTINGS Name 1.DISPLAY LANGUAGE Description Selects the language of the LCD messages. Setting ENGLISH FRENCH SPANISH 2.AUDIBLE TONES Sets the volume of the machine's sounds. - 1.KEYPAD VOLUME Selects the keypad touch beep volume. 0 (off) /1/2/3 2.ALARM VOLUME Selects - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 53
Approx. 5.8 W Weight • F50 Model 27.3 lb./12.4 • Radiation: FCC Part 15 Class B IC • Other: FCC Part 68 IC, Energy Black & White: Letter size: Approx. 17 pages/minute • Color: COLOR FAST mode, letter size: Approx. 10 pages/minute No. of Copies Maximum 99 copies Ink Tanks Ink Tanks Ink Colors: Black - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 54
with Windows 95/Windows 98/ Windows Me. *2 Based on printing the ISO JIS-SCID No.5 pattern at standard and plain paper mode with Windows 95/ Windows 98/Windows Me. Print Head Black: 320 nozzles (600 dpi) Cyan, Magenta, Yellow: 256 nozzles (1200 dpi) Printer Printing Method Bubble Jet ink on - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 55
copying 4-1 Black Ink Tank 5-4 BOTTOM MARGIN setting 7-2 Bubble Jet Paper 3-2 C C INK EMPTY message 6-4 Canon specialty print media (See Specialty print media) Cartridge holder 1-4 maintenance 5-7 CARTRIDGE JAMMED message 6-4 CHECK PAPER SIZE message 6-4 CHECK PRINTER message 6-4 Cleaning - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 56
1-5 Exposure, setting 4-4 F Feeder Cover 1-4 Feeding, paper problems 6-6 Film (See individual film names) G Glossy Photo Cards 3-2 Photo Paper 3-2 Guide document 1-4 paper 3-6 H Handling, safety instructions 1-3 HEAD CLEANING setting 7-2 HEAD REFRESHING setting 7-2 High Gloss Photo Film - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 57
instructions 1-2 Print media (See also individual print media names) description 3-2 quantity 3-1 requirements 3-1 I size 3-1 specialty 3-7 to 3-9 type 3-1 weight 3-1 Print quality problems 6-8 Printer Settings menu 7-1, 7-2 Printhead cleaning 5-7, 5-8 testing 5-7, 5-8 Printing area - Canon MultiPASS F30 | Reference Guide for the MultiPASS F30 and MultiPASS F50 - Page 58
Troubleshooting 6-1 Type conventions, this guide iii V VERTICAL & HORIZONTAL setting 4-6 Volume ALARM VOLUME setting 7-3 KEYPAD VOLUME setting 7-3 W WAIT COOLING message 6-5 Weight document 2-1 machine A-1 print media 3-1 WRONG CARTRIDGE message 6-5 Y Y INK EMPTY message 6-5 Yellow Ink
i
Your machine includes the following documentation. This documentation has been designed so that you can
easily use your machine to suit your particular needs.
Setting up the MultiPASS
...................................
Setting up paper
..............................................
Installing the MultiPASS Suite
.............................
Document and paper handling
.............................
Making copies
................................................
Maintenance
..................................................
Troubleshooting feed and copy issues
....................
Sending and receiving faxes
...............................
Speed dialing
.................................................
Troubleshooting fax issues
.................................
Controlling the MultiPASS from
your PC
.........................................................
Documentation is included on the CD-ROM in PDF form.
•
The machine shown in this guide is the F50 model.
Copyright
Copyright © 2001 by Canon, Inc. All rights reserved. No part of this publication may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written
permission of Canon, Inc.
Trademarks
Canon and BJ are registered trademarks. BCI, Bubble Jet, and MultiPASS are trademarks of Canon Inc.
All other product and brand names are registered trademarks, trademarks or service marks of their respective
owners.
As an ENERGY STAR
®
Partner, Canon U.S.A., Inc. has determined that this product
meets the ENERGY STAR
®
guidelines for energy efficiency.
NOTE
Using Your Documentation
Quick Start Guide
MultiPASS
Reference Guide
MultiPASS
Fax Guide
MultiPASS Suite for
Windows
®
Software
User’s Guide
F50 model only