Canon MultiPASS MP730 MultiPASS MP730 Set-Up Sheet
Canon MultiPASS MP730 Manual
 |
View all Canon MultiPASS MP730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon MultiPASS MP730 manual content summary:
- Canon MultiPASS MP730 | MultiPASS MP730 Set-Up Sheet - Page 1
purchasing the Canon MultiPASS MP730. To get your machine ready for use, please follow the instructions in this Set-Up Sheet before referring to any other documentation. • DO NOT assemble the machine or connect the USB cable IMPORTANT before installing the software. You will be instructed when to - Canon MultiPASS MP730 | MultiPASS MP730 Set-Up Sheet - Page 2
, including virus checkers. 3 Insert the MultiPASS MP730/700 Setup CD-ROM into your disk drive. 4 In the [MP Setup] screen, click [Install MP Drivers]. • If Set-up screen is not displayed, on the Windows desktop, double-click [My Computer] (Windows XP: Click [Start], then click [My Computer - Canon MultiPASS MP730 | MultiPASS MP730 Set-Up Sheet - Page 3
8 Follow the on-screen instructions. 9 Click [Finish]. IMPORTANT • Proceed to step below to assemble the machine. Please keep your computer powered on. Remove the shipping material from the machine. 1 Place the machine on a flat surface. 2 Remove all shipping tapes from the exterior of the machine. - Canon MultiPASS MP730 | MultiPASS MP730 Set-Up Sheet - Page 4
jack. NOTE • Before using your machine, you need to make sure it is set for your telephone line type. For details, see p. 6-4 of the User's Guide. • Refer to the receive mode instructions after the unit is powered on. Set the receive mode as follows: 1 On the operation panel, press [Fax], [Menu - Canon MultiPASS MP730 | MultiPASS MP730 Set-Up Sheet - Page 5
Load paper. Place a stack of paper (print-side up) in the multi-purpose tray q. Pinch the paper guide A and adjust to the width of the stack w. jam may occur. Install the printhead. 1 Press [Open] q and lift up the scanning unit w. IMPORTANT • Do not touch the metal rod or any parts inside the w - Canon MultiPASS MP730 | MultiPASS MP730 Set-Up Sheet - Page 6
press on the long sides of the ink tank C. DC • Once you remove the protective cap B, do not touch the ink port D. 2 Insert the ink tank (label-side up) into the correct slot (refer to the color guide on the printhead). Press down gently on the ink tank until an audible click is heard. BCI - Canon MultiPASS MP730 | MultiPASS MP730 Set-Up Sheet - Page 7
the printhead from the software. For details, refer to the Software Guide. 1 When the LCD A displays the following, press [Set]. ALIGN PRINT HEAD PRESS SET KEY A NOTE • If a display other than appears, refer to p. 9-5 of the Quick Reference Guide to align the printhead. The - Canon MultiPASS MP730 | MultiPASS MP730 Set-Up Sheet - Page 8
the Utility Software at this stage and install it later. For details, refer to p. IV of the Quick Reference Guide. ● View User's Manual To read the manual on the CD-ROM, click [View User's Manual] on the [MP Setup] screen. CAUTION • For Windows 2000, the machine may not be able to be set as the
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Unpack the machine and its components.
Check that you have the following:
NOTE
• A printer cable is not included.You must purchase a USB cable (less than 16
# /
8
ft./5 m) to
connect your machine to a computer.
Machine
Multi-purpose tray
Tray cover
Document tray
Printhead
Ink tanks
(Black, cyan, magenta, yellow)
Paper output tray
Power cord
Documentation
(Set-Up Sheet, Quick Reference Guide)
MultiPASS MP730/700 Setup CD-ROM
Telephone line cord
Destination labels
Set-Up Sheet
Set-Up Sheet
Thank you for purchasing the Canon MultiPASS MP730.
To get your machine ready for use, please follow the instructions in this Set-Up Sheet
before referring to any other documentation.
READ THIS SHEET FIRST
READ THIS SHEET FIRST
• DO NOT assemble the machine or connect the USB cable
before installing the software.You will be instructed when
to assemble and connect the cable.
IMPORTANT