Canon Optura 30 Digital Video Software (Windows) Ver.12 Instruction Manual
Canon Optura 30 - Optura 30 MiniDV Camcorder Manual
UPC - 013803040913
View all Canon Optura 30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon Optura 30 manual content summary:
- Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 1
Digital Video Software Windows Instruction Manual Version 12 E F Mode d'emploi Es Manual de Instrucciones - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 2
to the sound and image data ("Data") contained in the Software, which are to be downloaded to the applicable Canon digital camera product, Canon grants you a personal, non-exclusive license to use the Data on a single Canon digital camera product only. YOU SHALL NOT ASSIGN, SUBLICENSE, RENT, LEASE - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 3
INCIDENTAL LOSS OR DAMAGE INCLUDING LOSS OF PROFITS, EXPENSE OR INCONVENIENCE HOWSOEVER CAUSED OR ARISING OUT OF THE SOFTWARE OR THE USE THEREOF. NEITHER CANON, NOR ANY OF CANON'S SUBSIDIARIES, DISTRIBUTORS OR DEALERS SHALL HAVE ANY OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT BROUGHT - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 4
10.OWNERSHIP: All rights, including but not limited to copyrights and trade secret rights, to the SOFTWARE belong to Canon, its affiliated corporations and third party licensors. Your use of the SOFTWARE is subject to the laws of the United States, and Canada, and other applicable copyright and - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 5
BEFORE USING 2 Canon Software License Agreement 2 E Read This First ...7 Checking Supplied Accessories 8 System Requirements 9 What Can Be Accomplished with the Software 11 Installing the Digital Video Software 12 Connecting the Camcorder to a Computer 17 Downloading Images (ZoomBrowser EX - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 6
Contents Auto-Downloading Settings 79 Uninstalling the Software 82 Uninstalling ZoomBrowser EX 82 Uninstalling the TWAIN Driver/WIA Driver 83 Troubleshooting 84 6 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 7
been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors E or omissions. Canon reserves the right to change the specifications of the hardware and software described herein at any time without prior notice. • No part - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 8
Read This First Checking Supplied Accessories Use the following accessories to download recorded images from a memory card to your computer. • IFC-300PCU USB Cable • DIGITAL VIDEO SOLUTION DISK For Windows The explanations in this manual use mainly Windows XP screen shots. 8 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 9
: 40 MB or more • Canon DV TWAIN Driver: 25 MB or more • Canon DV WIA Driver: 25 MB or more Display: 800 × 600 pixels/High Color (16 bit) or better, 1024 × 768 pixels or better is recommended Windows ❍ The USB interface is only supported for those computers that come with Windows 98/Windows - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 10
System Requirements ❍ Not all operations performed with a connection to a USB 2.0 compatible board can be guaranteed. 10 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 11
contained on the DIGITAL VIDEO SOLUTION DISK For Windows. E ■ TWAIN Driver ( 14) TWAIN Driver is the driver software for Windows 98 and Windows 2000 that is required for downloading images from a memory card to a computer. ■ WIA Driver ( 14) WIA Driver is the driver software for Windows Me that - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 12
programs. Windows XP Users: Your digital video camcorder is equipped with the standard Picture Transfer Protocol (PTP). This protocol enables you to download images by simply connecting the camcorder to a computer with the USB cable (the software such as the [Scanner and Camera Wizard] starts - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 13
Windows 4. Select your language. E 5. Click Digital Video Software [Install]. For details about the DV Network Software, refer to the DV Network Software Instruction Manual. Installer Panel If the following dialog appears, click [Restart] to restart the computer. After restarting the computer, - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 14
the software individually, select [Custom Installation]. When you select [Custom Installation], select a USB driver. (Windows XP: The USB driver supplied with the Windows operating system is used. You do not need to install a USB driver.) - Windows 98/Windows 2000: Canon DV TWAIN Driver - Windows Me - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 15
10.Review the installation settings and click [Next]. • Installation starts. E • If the "Digital signature not found" message appears, click [Yes]. 11.When installation is complete, select [Yes, I want to restart my computer now.] and click [Finish]. Windows 15 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 16
is complete, remove the DIGITAL VIDEO SOLUTION DISK For Windows before you connect the camcorder to the computer. ❍ Windows 98/Windows Me/Windows 2000: At this point, the files for the TWAIN Driver or WIA Driver have only been copied to your computer. To download images via USB connection - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 17
cable to the computer's USB port and the camcorder's USB Terminal. • The first time you connect the camcorder to the computer: - Installation of the DV TWAIN Driver (Windows 98/Windows 2000) or the DV WIA Driver (Windows Me) starts. - If the "Digital signature not found" message appears, click [Yes - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 18
Connecting the Camcorder to a Computer • For instructions on how to start ZoomBrowser EX and download images to the computer, see Downloading Images ( 19). USB Terminal on the Camcorder USB Cable Camcorder End Computer End USB Port on the Computer 18 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 19
the memory card or detach the USB cable. • Do not turn off the camcorder or the computer. • Do not change the position of the POWER switch or the TAPE/ CARD switch. ❍ Images recorded onto the memory card or downloaded to the hard disk are important original data files. Create a copy of the file - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 20
Downloading Images (ZoomBrowser EX) Starting ZoomBrowser EX 1. Connect the camcorder to the computer ( 17). 2. Select [Canon CameraWindow] and click [OK]. • Windows XP: If the window does not appear or if "PC CONNECT" does not appear on the camcorder screen, click the Windows [start] menu and select - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 21
Windows 3. Click [Set]. E • The [CameraWindow (Launcher)] icon appears on the taskbar. • Windows Me: If the following dialog appears, click [OK]. To change the settings, you need to restart the computer. 21 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 22
the computer. For details, see Auto-Downloading ( 22). - [List Images]: ZoomBrowser EX starts. The Camera Window opens, displaying the camcorder images as thumbnails (small images). For details, see Downloading Images from the Camera Window ( 23). - [Browse Images with ZoomBrowser EX]: ZoomBrowser - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 23
Images from the Camera Window 1. Click [List Images] in the [CameraWindow - Download E Image(s)] window. ZoomBrowser EX starts and the Camera Window opens. 2. In the Camera Window, select the image you wish to download and click [Download image]. • An orange frame appears around the selected - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 24
(ZoomBrowser EX) The Camera Window closes and the Main Window opens. The downloaded images appear in the Main Window. Using the Camcorder to Download Images (Direct Transfer Function) If your camcorder supports the Direct Transfer Function, you can use the camcorder to download images. When you - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 25
the procedure below to open the Camera Window. For instructions on how to connect the PC Card Reader/Writer, please refer to its manual. 1. Insert a memory card containing images recorded with the camcorder into the reader. 2. Windows 98/Windows Me/Windows 2000: Double-click the [ZoomBrowser EX - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 26
EX starts. The Camera Window opens and images will be downloaded to the computer. For instructions on how to set the Auto-download settings, see Auto-Downloading Settings ( 79). • [List Images]: ZoomBrowser EX starts. The Camera Window opens, displaying the camcorder images as thumbnails (small - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 27
Using Other ZoomBrowser EX Functions Camera Window The Camera Window opens when a connection to a camcorder is initiated. E Images will be are displayed downloaded to a computer. in reduced size. Windows Task Area Toolbar Movie icon Task Area [Download image]: Downloads selected images - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 28
. The images will be named "file prefix + XXXX.JPG". Camera Settings Window You can adjust the date, time and owner settings in the Camera Settings window using the computer when the camcorder is connected. You can also check the battery charge and remaining memory card capacity, and format the - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 29
in the selected folder. Task Area (Main Menu) [Camera & Memory Card]: Use this to display the Camera Window, download images or change the My Camera Settings. Menu options: Browse and Download Images, Upload Images and My Camera Settings. [Print]: Prints selected still images. Menu options - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 30
part of the Browser Area or the tab of a folder name. Preview Mode: Displays one image at a large size. You can review file name, comment, histogram and image information. Select the preview image from the bottom of the Main Window, or by clicking [Previous] or [Next]. Selects the size at which - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 31
[Rotate]: [Delete]: You can change the file name or enter a comment. Click here to mark the image as Favorite. Opens the View/Modify Keywords window. You can mark the image as Favorite and add a keyword. Switch between images with this button when more than one image is selected. Rotates selected - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 32
Using Other ZoomBrowser EX Functions Image Viewer Window The Image Viewer window opens when you double-click a still image, or when you select a still image and click [View Image]. Zoom You can change the zoom ratio. Color, - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 33
icon ( ). When you double-click the E thumbnail in the Main Window, QuickTime Player starts and plays back the movie. ❍ If QuickTime 3.0 or a later version is not already installed on your computer, install the QuickTime from the DIGITAL VIDEO SOLUTION DISK. Place the disk in the CD-ROM drive and - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 34
Playing Back Movies From a Memory Card 2. Click the e (play) button in QuickTime Player. The movie will be played back. 34 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 35
E QuickTime 5.0 or a later version is required to edit movies. If it is not already installed on your computer, install it from the DIGITAL VIDEO SOLUTION DISK For Windows. Place the disk in the CD-ROM drive and click QuickTime [Install] in the installer panel. 1. Click [View & Modify] in the Main - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 36
Editing Movies (MovieEdit Task) 3. Select images and click [Arrange]. You can select multiple images or a folder to include all images in that folder. 4. Arrange images and click [Apply Effect]. To change the order of images, select an image in the Storyboard Area and click [Move Left] or [Move - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 37
You can set the filter effect type, the start and end point, and preview the effect. - [Transition Effect]: Opens the [Transition Effect Settings] window. You can set the transition effect type and display time, and preview the effect. To set a transition effect, you need to select a transition - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 38
Editing Movies (MovieEdit Task) 7. Click [Save]. Movies are saved as AVI files in Motion JPEG format. 8. Click [Exit]. Destination Folder 38 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 39
not already installed on your computer, install it from the DIGITAL VIDEO SOLUTION DISK For Windows. Place the disk in the CD-ROM drive and click QuickTime [Install] in the installer panel. ❍ Still images cannot be selected. For instructions on how to export still images, see Exporting Images ( 61 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 40
in that folder. 4. Select a file format and click [Set the save format]. 5. Specify the export settings and click [Specify name of file to be saved]. 40 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 41
Windows 6. Specify the file name and click [Start export]. In each case, specify the destination folder and file name of the movie to be E exported. Destination Folder The Main Window opens. 41 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 42
Running a Slide Show You can view selected still images in a slide show. Movies cannot be selected for a slide show. 1. Click [View & Modify] in the Main Window. 2. Click [View as a Slide Show]. 3. Select the images and click [Setup Slide Show]. 42 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 43
such as file name or title. • [Advance to Next Slide]: Select to advance manually or automatically. When you select "Every 3 seconds", you can select the interval in the effect in the preview window. Windows 5. Click [Start Slide Show]. Click in the lower right corner to end the slide show - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 44
modification date, shooting date or keywords. You can mark images as Favorites ( 47) and add keywords ( 47). Searching Images 1. Click [View & Modify] in the Main Window. 2. Select the folder in which you wish to search for the image and click [Search]. 44 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 45
parameter you wish to use. E • If you selected [Modification Date] or [Shooting Date], set the date range. If you selected [Keywords], select the keywords. Windows Clicking here hides the search parameter details. 4. Click [Start Search]. The images matching the conditions will be displayed. 45 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 46
Searching Images 5. Click [Finish]. To change the search parameters and perform another search, click [Specify Search Condition] and repeat steps 3-4. The images of the search result are displayed in the [Search Results] folder. You can print or copy these images to another folder. The images will - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 47
Windows Setting Parameters for Future Searches 1 Select an image in the Browser Area. E 2. Select [View/Modify Keywords] from the [Tools] menu. 3. Place a check mark beside [Favorite - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 48
Searching Images The symbol shown below is displayed on images marked as Favorites. Favorites Symbol You can add and delete keywords. Open the Manage keywords window by selecting [Manage keywords] from the [Tools] menu. 48 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 49
midi"). E The sound cannot be played back on the camcorder. Adding Sound to an Image 1. In the Main Window, select an image and select [Add/ Remove Sound] from the [Edit] menu. The Sound window appears. Windows 2. Click [Add]. A window appears allowing you to select a file. 3. Select the sound - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 50
Images to E-mail Messages You can attach selected still images to an E-mail message. To use this function, the e-mail software must be enabled as MAPI client. For details, refer to the instruction manual of the e-mail software. 1. Click [Internet] in the Main Window. 2. Click [Email Images]. 50 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 51
[Apply] displays the file size after the compression as [Total size of changed images]. • You can check the compressed still image by pressing [View Images]. Windows 51 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 52
starts and the selected still images appear as an attachment in the message window. Input address, subject and your comments and send the message. E-mail software not supporting MAPI does not start automatically. In this case, select [Save the images in a folder...]. • If you select [Save the - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 53
while data is being transferred to the printer (when the camcorder's card access indicator is flashing). Doing so may cause memory card data to become corrupted. ❍ If you are using a network printer and the printer name (including the network path) exceeds 31 characters, it may not be possible to - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 54
mark beside the items you wish include in the print. • If you wish to add a comment, select a still image and enter a comment in the Properties window by clicking (Properties). 54 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 55
5. Click [Select Printer & Album Type] and select a printer and album type. E Select the printer. Windows Select the album type. 6. Click [Select Paper] and select the media type, paper size and page orientation. • If you click [Decorate Album], you can change - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 56
Exif 2.2 compatible camcorders and even other images, yielding high-quality prints. Selecting the Print Mode and Number of Copies camcorder. * Digital Print Order Format When you are using a SD memory card, make sure the protect switch is set to allow recording. 1. Click [Set] in the Camera Window - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 57
image to select the number of copies. • [Index Print] and the option [Titles] of the [Edit] menu (printing of date and file number) are not supported by the camcorder. 3. Click [Save to Camera]. The DPOF print settings will be saved to the memory card. The Edit Slide/DPOF - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 58
in Stitch Assist mode. The following instruction explains how to merge still images recorded in Stitch Assist mode with the camcorder. Still images recorded in Stitch Assist mode with Wide-converter or Teleconverter attached cannot be merged correctly. 1. Click the arrow in the Camera Window. Still - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 59
3. Arrange the order of the images and click [2. Merge]. Operational instructions are displayed in the upper section of the window. E 4. Click [Start]. Windows 59 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 60
name and click [Save]. • In the View the Saved Image? window, click [Yes]. The Viewer window opens and displays the merged image. • To exit PhotoStitch, from If it is not already installed, install it from the DIGITAL VIDEO SOLUTION DISK For Windows. Place the disk in the CD-ROM drive and click - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 61
movie and still image information to a E text file, or copy and rename movies and still images. 1. Click [View & Modify] in the Main Window. Windows 2. Click [Export Images]. 3. Select the images and click [Select Export Type]. You can select multiple images or a folder to include all images - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 62
to a text file. • [Export Images as a Screen Saver]: Saves still images as a Screen Saver. • [Export an Image as Wallpaper]: Saves still images as Windows wallpaper. • [Copy Images and Rename]: Copies and names the selected images. You can also specify a prefix to be added to the exported images. 62 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 63
for the export settings vary according to the export type. E Follow the instructions displayed in the window. • In each case, specify the destination folder and file name for the images to be exported. Windows Destination Folder Image information will be saved along with the images when you - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 64
computer to a memory card. You can also add sample images for card mix from the DIGITAL VIDEO SOLUTION DISK For Windows. Adding Still Images to the Memory Card 1. Click [Camera & Memory Card] in the Main Window. 2. Click [Upload Images]. If you have already selected an image, move on to step 4. 64 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 65
Select the still images you wish to add and click [Open Camera Window]. E You can select multiple still images by continuously clicking on the still images. Click on the still image again to deselect. 4. In the Add Image window, select the image size and click [Add]. • The selected still images - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 66
card. 4 images for CARD CHROMA and CARD ANIMATION, and 2 images for CARD LUMINANCE and CAMERA CHROMA are provided on the DIGITAL VIDEO SOLUTION DISK For Windows. 1. Insert the DIGITAL VIDEO SOLUTION DISK For Windows to the computer's CD-ROM drive. If the installer panel opens, click [Exit] to close - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 67
followed by [DVC CARD IMAGE]. E Sample images or folders for CAMERA CHROMA, CARD ANIMATION, CARD CHROMA and CARD LUMINANCE appear in the Browser Area. 5. Select the sample images you wish to add and click [Open Camera Window]. You can select multiple images by continuously clicking on the images - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 68
Adding Still Images from Your Computer to the Memory Card 6. In the Add Image window, click [Add]. • The selected images will be recorded to the memory card. • When recording is complete, the sample images will appear in the Camera Window. 68 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 69
Saving Images on CD-R/RW Disks (Windows XP Only) You can copy and save images to CD-R and CD-RW disks. The shooting drive as standard equipment. 1. Place a CD-R/RW disk in the computer's CD-ROM drive. 2. If the following window appears, click [Cancel]. 3. Click [View & Modify] in the Main - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 70
Saving Images on CD-R/RW Disks (Windows XP Only) 4. Click [Backup to CD]. 5. Select the folders or images you wish to save and click [Specify Backup Settings]. 70 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 71
Windows 6. Set the backup settings and click [Start Backup]. E The disk will be ejected from the drive when copying is complete. You can add images to a CD-R/RW disk that already contains images. 71 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 72
• Do not change the position of the POWER switch or TAPE/CARD switch. Saving the My Camera Settings to the Camcorder 1. In the Main Window, click [Camera & Memory Card] followed by [My Camera Settings]. The My Camera Window ( 74) appears. 2. In the My Camera window, select the theme set you wish to - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 73
replaces the old setting and appears in the [Camera] list. • If you wish to use this setting on the camcorder, change the My Camera Setting on the camcorder itself. Refer to the Camcorder Instruction Manual for details. Alternatively, you can display the My Camera window from the Camera Window - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 74
Customizing Your Camcorder with the My Camera Settings My Camera Window For individual settings. For setting in theme sets. Selects the type of the My Camera Settings. Displays the My Camera Settings of the camcorder. Displays the My Camera Settings saved on the computer. Adds an image file to - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 75
Adding Still Images to the My Camera Window E To use still images recorded with your camcorder, you need to download them to the computer before you can add them to the My Camera Window. 1. In the My Camera window, click the [Set individually] tab, select [Startup Image] in the [Data Type] list - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 76
Your Camcorder with the My Camera Settings Creating an Original Sound File and Adding it to the My Camera Window ❍ QuickTime is required to play back the sound. If QuickTime is not already installed on your computer, install the QuickTime from the DIGITAL VIDEO SOLUTION DISK For Windows. Place - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 77
the recording to conform with the time limits by moving the blue and red switches and clicking the [Cut] button. Windows • The following chart shows standard time lengths for My Camera sounds. Sound Type Start-up Sound Shutter Sound Operation Sound Self-Timer Sound Lengths in Seconds 11.025 kHz - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 78
name and click [OK]. • The created sound file appears in the [My Computer] list. • You can now save the newly created sound file to the camcorder using the procedures described in Saving the My Camera Settings to the Camcorder ( 72). 8. Click to close the My Camera Sound Maker window. 78 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 79
you set ZoomBrowser EX to automatically download images from the camcorder when ZoomBrowser EX is started, specify the download settings. E 1. In the Main Window, select [Auto-download setting] from the [Camera] menu. 2. Select [Images are automatically downloaded...] and click [Select Image Type - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 80
Settings 3. Select the image type to be downloaded and click [Save In]. When the protect switch of the SD Memory Card is activated during . 4. Select the destination folder in which you wish to save the image and click [Set Action]. Windows Me: You cannot select the desktop for the destination. 80 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 81
are downloaded and click [Setup Completed]. E Allows you to display the folder in which the images have been saved after downloading them. Allows you to perform one of the following processes in succession. • Layout Print • Contact Sheet Print • View as slideshow • Send by e-mail Windows 81 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 82
ZoomBrowser EX. ❍ Uninstall all programs in [Canon Utilities] when you have uninstalled ZoomBrowser EX. ❍ PhotoRecord and PhotoStitch can be removed with the same procedure. ❍ RemoteCapture Task and RAW Image Task are used with Canon digital cameras. The camcorder does not support these programs. 82 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 83
[OK] to close the window. 3. Click the Windows [Start] menu and select [Programs], [Canon Utilities], [DV TWAIN Driver x.x] and [TWAIN Driver Uninstall]. A version number appears in place of "x.x". Windows Me: 1. Delete the camcorder icon from the [Scanners and Cameras] folder. 2. Click [OK] to - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 84
the TWAIN/WIA Driver, then reinstall the driver from the DIGITAL VIDEO SOLUTION DISK For Windows (remove the check marks from the other programs when prompted to select the programs to be installed). ZoomBrowser EX Operation ? Cannot download images ➜ The camcorder it not set to the correct mode - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 85
[Control Panel] or [Printers and Other Hardware]. ❍ If [Canon Camera] or your camcorder model name does not appear in the [Scanners and Cameras Properties] or [Scanners and Cameras]. ❍ If you connected the camcorder to the computer via the USB cable before installing the Digital Video Software. 85 - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 86
Troubleshooting Windows 98/Windows Me Leave the camcorder connected to the computer. 1. Click the Windows [Start] menu and select [Settings] and [Control Panel]. 2. Double-click the [System] icon. The [System Properties] dialog appears. 3. Click the [Device Manager] tab. 4. If [Canon Camera] appears - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 87
connected to the computer. E 1. Click the Windows [Start] menu and select [Settings] and [Control Panel]. 2. Double-click the [System] icon. 3. Click the [Hardware] tab. 4. Click the [Device Manager] button. 5. If [Canon Camera] or your camcorder model name appears under the [Other Devices - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 88
Troubleshooting 7. Look for the file for Canon digital camcorders starting with [Oem*]. • A number such as Oem*.inf] file, the Windows Notepad program will start and show the file contents. Click each [Oem*inf] file until you find one that contains "*** Canon Camera Driver Setup File***" in its - Canon Optura 30 | Digital Video Software (Windows) Ver.12 Instruction Manual - Page 89
INC. U.S.A. CANADA ASIA Canon U.S.A., Inc. Canon Customer Care Center Tel (US): 1-800-828-4040 (Mon.-Fri., 9 AM to 8 PM Eastern Time) Canon Canada Inc. Tel (Canada): 1-800-OK-CANON (1-800-652-2666) Canon Hongkong Co., Ltd. 19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong
Digital Video Software
Windows
Version 12
Instruction Manual
Mode d’emploi
Manual de Instrucciones
E
F
Es