Canon PC980 Service Manual - Page 145

CHAPTER 5 PICK-UP/FEEDING SYSTEM 7) Using a hex wrench or the like, push the hook [10] of the pickup roller through the hole to remove the pickup roller [11]. Caution: When removing the pickup roller, be sure to push the claw while holding the shaft in place so as to prevent the pickup roller shaft from freeing itself. Hex wrench [10] Pickup roller shaft [11] Figure 5-205 Caution: When mounting the multifeeder unit, perform the next steps first: 1) Turn on the power switch; then, se- lect the multifeeder, and press the Copy Start key. 2) When the pickup gear unit has moved up as far as it can, turn off the power switch. 3) Mount the multifeeder; then, make a copy using the multifeeder. Pickup gear unit Figure 5-206 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 5-21