Canon PC980 Service Manual - Page 148
See III.A.2.Removing the, See E.1.Removing the Registration
UPC - 030275182323
View all Canon PC980 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
CHAPTER 5 PICK-UP/FEEDING SYSTEM 2.2 Removing the Pickup Clutch (multifeeder type) 1) Remove the front lower cover. (See Chapter 7.III.A.2."Removing the Front Lower Cover.") 2) Remove the registration roller unit. (See E.1."Removing the Registration Roller Unit.") 3) Open the machine's top unit farther, and hold it in place with the handle of a screwdriver (about 30 mm in diameter). Figure 5-212 4) Disconnect the two connectors [1], and remove the two screws [2] then, detach [1] the solenoid unit [3]. [2] [3] Figure 5-213 5-24 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5
PICK-UP/FEEDING SYSTEM
COPYRIGHT
©
1999
CANON INC.
CANON
PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
5-24
Figure 5-212
Figure 5-213
[1]
[2]
[3]
2.2
Removing the Pickup Clutch
(multifeeder type)
1)
Remove the front lower cover.
(See Chapter 7.III.A.2.“Removing the
Front Lower Cover.”)
2)
Remove the registration roller unit.
(See E.1.“Removing the Registration
Roller Unit.”)
3)
Open the machine’s top unit farther, and
hold it in place with the handle of a screw-
driver (about 30 mm in diameter).
4)
Disconnect the two connectors [1], and
remove the two screws [2] then, detach
the solenoid unit [3].