Canon PIXMA MP280 On-Screen Manual - Page 571

Scanning with WIA Driver Page 571 of 707 pages File type Select a file format from JPEG, BMP, PNG and TIFF. Resolution (DPI) Enter the resolution. Specify a value between 50 dpi and 600 dpi. 300 dpi is set by default. Resolution Brightness Move the slider to adjust the brightness. Move it to the left to darken and right to brighten the image. You can also enter a value (-100 to 100). Contrast Move the slider to adjust the contrast. Moving it to the left will decrease the contrast of the image, thus softening the image. Moving it to the right will increase the contrast of the image, thus sharpening the image. You can also enter a value (-100 to 100). Preview or scan images as separate files Select this checkbox to preview or scan multiple images as separate files. 4. Click Preview to preview the image. The preview image appears on the right. 5. Click Scan. When scanning is completed, the scanned image appears in the application. Scanning with WIA Driver 1.0 The following is an example of scanning using "Paint." 1. Place the document on the Platen. Placing Documents 2. Click From scanner or camera from document in the application.) . (Select the command to scan a 3. Select an image type according to the document to be scanned. Note To scan with the values previously set in Adjust the quality of the scanned picture, select Custom Settings. 4. Click Adjust the quality of the scanned picture and set the preferences as required.