Canon PIXMA MP280 On-Screen Manual - Page 601

Changing the Machine Operation Mode Page 601 of 707 pages Advanced Guide > Changing the Machine Settings > Changing Machine Settings from Your Computer > Changing the Machine Operation Mode P035 Changing the Machine Operation Mode If necessary, switch between various modes of machine operation. The procedure for configuring Custom Settings is as follows: Custom Settings 1. Open the printer driver setup window 2. Make sure that the machine is on, and then click Custom Settings on the Maintenance tab The Custom Settings dialog box opens. Note If the machine is off or bi-directional communication is disabled, a message may appear because the computer cannot collect the machine status. If this happens, click OK to display the most recent settings specified on your computer. 3. If necessary, complete the following settings: Prevent paper abrasion The machine can increase the gap between the print head and the paper during high-density printing to prevent paper abrasion. Check this check box to use this function. Align heads manually Usually, the Print Head Alignment function on the Maintenance tab is set to automatic head alignment, but you can change it to manual head alignment. If the printing results are unsatisfactory even after you execute automatic head alignment, see " Aligning the Print Head Position ," and execute manual head alignment. Check this check box to perform the manual head alignment. Uncheck this check box to perform the automatic head alignment. Ink Drying Wait Time You can set the length of the machine rest time until printing of the next page begins. Moving the slider to the right increases the pause time and moving the slider to the left decreases the time. If the paper gets stained because the next page is ejected before the ink on the printed page dries, increase the ink drying wait time. Reducing the ink drying wait time speeds up printing. 4. Transmit the settings Click Send, and click OK when the confirmation message appears. The machine operates with the modified settings hereafter. Page top