Canon PIXMA MP280 On-Screen Manual - Page 605

An Error Code Is Displayed on the LED Page 605 of 707 pages Advanced Guide > Troubleshooting > An Error Code Is Displayed on the LED U305 An Error Code Is Displayed on the LED Alarm Lamp Is Lit Orange When a machine error occurs, the Alarm lamp is lit orange and the error code as follows is displayed on the LED. Check the error code displayed on the LED and take the appropriate action to correct the error. * Depending on the error occurred, the Alarm lamp is not lit. Error Code Cause Action E, 0, 2 The machine is out of paper./Paper does not feed. Reload the paper on the Rear Tray correctly and press the Black or Color button. (LED display) E, 0, 3 (LED display) E, 0, 4 E, 0, 5 (LED display) E, 0, 7 Paper Output Tray is closed./Paper jam. If the Paper Output Tray is closed, open it. The machine resumes printing. If opening the Paper Output Tray does not resolve the problem, or if the tray was open to begin with, the paper may be jammed. Remove the jammed paper, reload paper properly in the printer, then press the Black or Color button. Paper Jams The FINE Cartridge cannot be recognized. The FINE Cartridge may not be installed properly, or the Cartridge may not be compatible with this machine. Open the Scanning Unit (Cover) and install the appropriate FINE Cartridge. After that, push the Ink Cartridge Locking Cover until it clicks into place, then close the Scanning Unit (Cover). If the error is not resolved, contact the service center. FINE Cartridge is not Make sure that each FINE Cartridge