Canon PIXMA MP280 On-Screen Manual - Page 607
of 707 s, An Error Code Is Displayed on the LED
View all Canon PIXMA MP280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 607 highlights
An Error Code Is Displayed on the LED Page 607 of 707 pages E, 1, 6 (LED display) E, 3, 0 The ink has run out. The ink has run out. Replace the ink cartridge and close the Scanning Unit (Cover). If printing is in progress and you want to continue printing, press the machine's Stop (Reset) button for at least 5 seconds with the ink cartridge installed. Then printing can continue under the ink out condition. The function for detecting the remaining ink level will be disabled. Replace the empty ink cartridge immediately after the printing. The resulting print quality is not satisfactory, if printing is continued under the ink out condition. The size of the original cannot be correctly detected or the document is too small when the Fit-toPage copying is selected. Make sure that the original meets the requirements and is correctly loaded on the Platen Glass. Check the position and direction of the original loaded on the Platen Glass. (LED display) E, 3, 1 The machine is not connected with the computer. Connect the machine and the computer with a USB cable. (LED display) E, 5, 0 (LED display) Scanning the print head alignment sheet has failed. Press the Stop/Reset button to dismiss the error, then take the actions described below. Make sure that the print head alignment sheet is set in the correct position and orientation on the Platen Glass. Make sure the Platen Glass and the print head alignment sheet are not dirty. Make sure the type and size of loaded paper is suitable for Automatic Print Head Alignment. For Automatic Print Head Alignment, always load one sheet of A4 or letter-sized plain paper. Make sure if Print Head nozzles are clogged. Print the nozzle check pattern to check the status of the Print Head. Routine Maintenance If the error is not resolved, connect the machine to the computer and