Canon PIXMA MP280 On-Screen Manual - Page 608

An Error Code Is Displayed on the LED align the Print Head on the printer driver. Aligning the Print Head Position Page 608 of 707 pages POWER Lamp Flashes Green and Alarm Lamp Flashes Orange Alternately When the POWER and Alarm lamps flash alternately as shown below, and the error code as follows is displayed on the LED, an error requiring servicing might have occurred. P, 0, 2 Error Code (LED display) P, 1, 0 Action Cancel printing, turn off the machine. Then clear the jammed paper or protective material that is preventing the FINE Cartridge Holder from moving, and turn on the machine again. Important Be careful not to touch the components inside the machine. The machine may not print out properly if you touch it. If the problem is not resolved, contact the service center. Turn off the machine, and unplug the power cord of the machine from the power supply. Contact the service center. (LED display) Other cases than above: Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center. Page top