Canon PIXMA MP280 On-Screen Manual - Page 64

Replacing a FINE Cartridge Page 64 of 707 pages (E) Closed correctly (F) Not closed correctly (the cover is tilted) Important The machine cannot print unless both the Color and Black FINE Cartridges are installed. Be sure to install both the FINE Cartridges. 6. Lift the Scanning Unit (Cover) slightly to set the Scanning Unit Support back to its original position, and gently close the Scanning Unit (Cover). Caution When setting the Scanning Unit Support back to its original position, be sure to hold the Scanning Unit (Cover) firmly, and be careful not to get your fingers caught. Note If the Alarm lamp lights or flashes orange after the Scanning Unit (Cover) is closed, refer to " Troubleshooting" in the on-screen manual: Advanced Guide . When you start printing after replacing the FINE Cartridge, the machine starts cleaning the Print Head automatically. Do not perform any other operations until the machine completes the cleaning of the Print Head. If printed ruled lines are misaligned or the print head position is misaligned, adjust the print head position. See Aligning the Print Head . Page top