Canon PIXMA MP280 On-Screen Manual - Page 7

Main Components Page 7 of 707 pages (1) ON button / POWER lamp Turns the power on or off. Before turning on the power, make sure that the Document Cover is closed. Important Disconnecting the power plug When disconnecting the power plug after turning off the power, be sure to confirm that the POWER lamp is not lit. If the power plug is disconnected from the wall outlet while the POWER lamp is lit or flashing, the machine may become unable to print properly since the Print Head is not protected. Note POWER and Alarm lamps You can check the status of the machine with the POWER lamp and Alarm lamp. - POWER lamp is off: The power is off. - POWER lamp lights green: The machine is ready to print. - POWER lamp flashes green: The machine is initializing or shutting down. - Alarm lamp lights or flashes orange: An error has occurred and the machine is not ready to print. For details, refer to "Troubleshooting" in the on-screen manual: Advanced Guide. - POWER lamp flashes green and Alarm lamp flashes orange alternately: An error that requires contacting the service center may have occurred. For details, refer to " Troubleshooting" in the on-screen manual: Advanced Guide . (2) LED (Light Emitting Diode) Displays the number of copies, Maintenance code, or operational status such as an error code. (3) [+] button Specifies the number of copies. (4) Ink lamps Light or flash orange when ink runs out, etc. The lamp on the left indicates the Color FINE Cartridge status and the lamp on the right indicates the Black FINE Cartridge status. (5) Paper button Selects the page size and media type. (6) SCAN button Starts scanning the original to save it on the computer. (7) Stop/Reset button Cancels operations. You can also press this button to cancel a print, copy, or scan job in progress. (8) Color button * Starts color copying. You can also press this button to finalize your selection for the setting item.