Canon PIXMA MP810 Quick Start Guide

Canon PIXMA MP810 Manual

Get Canon PIXMA MP810 PDF manuals and user guides View all Canon PIXMA MP810 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon PIXMA MP810 manual content summary:

  • Canon PIXMA MP810 | Quick Start Guide - Page 1
    Photo All-in-One Quick Start Guide
  • Canon PIXMA MP810 | Quick Start Guide - Page 2
    self-help in an intuitively guided interactive troubleshooting environment, the place to start is our helpful tech support web site. In addition, the latest driver downloads, answers to frequently asked questions, product information, and "where to buy" instructions are found here. 2. Email Tech
  • Canon PIXMA MP810 | Quick Start Guide - Page 3
    Photo All-in-One Quick Start Guide
  • Canon PIXMA MP810 | Quick Start Guide - Page 4
    , without the prior written consent of Canon U.S.A., Inc. © 2006 Canon U.S.A., Inc. Disclaimer Canon U.S.A., Inc. has reviewed this manual thoroughly in order that it will be an easy-to-use guide to your Canon PIXMA MP810 Photo All-in-One. All statements, technical information and recommendations
  • Canon PIXMA MP810 | Quick Start Guide - Page 5
    56 Print Head Cleaning 58 Print Head Deep Cleaning 60 Aligning the Print Head 62 Cleaning Your Machine 67 Troubleshooting 70 Error Message Is Displayed on the LCD ......71 LCD Cannot Be Seen At All 74 An Unintended Language Is Displayed on the LCD 74 Cannot Install the MP Drivers 74
  • Canon PIXMA MP810 | Quick Start Guide - Page 6
    select a mode and press the Function button (f2/Introduction), the instructions for the selected mode are displayed. You can select the following page 29. Photo index sheet: You can easily print the photos from a memory card using the Photo Index Sheet. See "Printing Using the Photo Index Sheet"
  • Canon PIXMA MP810 | Quick Start Guide - Page 7
    the Machine Settings" in the User's Guide on-screen manual. You can scan printed photos and then print them. See "Photo Printing from Photo or Film" on page 37. you press the Function button (f1/Remaining ink vol) on the HOME screen, the remaining ink volume screen is displayed. (B) Function button
  • Canon PIXMA MP810 | Quick Start Guide - Page 8
    machine, confirm the following. z The Print Head and ink tanks are set into place. If you are using the machine connected to a computer, confirm also the following. z The machine is connected to your computer (or a compatible device). z The MP Drivers are installed. Note If preparatory operations
  • Canon PIXMA MP810 | Quick Start Guide - Page 9
    . You can configure the interval that the machine waits before entering Power save mode. See "Other Settings" in "Changing the Machine Settings" of User's Guide on-screen manual. When you try to copy or scan, the machine will exit from Power save mode. If you use the machine frequently, we recommend
  • Canon PIXMA MP810 | Quick Start Guide - Page 10
    Printing from Photo or Film" on page 37. Max. 8.5 x 11.7 inches / 216 x 297 mm Max. 0.98 inches / 25 mm „ Loading Original Documents Load originals to copy or scan on the Platen Glass. For details on how to load a photo, see "Scanning a Photo" on page 37. Note Make sure any glue, ink, correction
  • Canon PIXMA MP810 | Quick Start Guide - Page 11
    / 25 mm thick, such as books. Set them on the Platen Glass in the same way as paper documents. 2 Gently close the Document Cover. Before Printing 7
  • Canon PIXMA MP810 | Quick Start Guide - Page 12
    Sided*2, *4 Photo Paper Plus Semi-gloss*4 Photo Paper Pro*4 Photo Stickers*6, *7 T-Shirt Transfers*2 Model*1 - - HR-101N SW-201 GP-401 GP-501 MP-101 GP-502 PP-101 PP-101D SG-101, SG-201 PR-101 PS-101 TR-301 Paper Support Load Limit Auto Sheet Feeder Cassette 0.52 inches / 13 mm 10 envelopes 80
  • Canon PIXMA MP810 | Quick Start Guide - Page 13
    , and Layout When Printing from a Mobile Phone" of the User's Guide on-screen manual. z To specify the page size and media type when printing from your computer, refer to the Printer Driver Guide on-screen manual. z To specify the page size and media type when printing photos saved on mobile phones
  • Canon PIXMA MP810 | Quick Start Guide - Page 14
    too thick (non-Canon genuine paper weighing more than 105 gsm / 28 lb) z Picture postcards z Postcards affixed with photos or stickers z Envelopes with glitter, etc. z Photo Paper Pro Guidelines z Do not touch the print surface until the ink is dry (approximately 30 minutes 10 Before Printing
  • Canon PIXMA MP810 | Quick Start Guide - Page 15
    Specialty Media Canon recommends that you use Canon genuine media to ensure optimal print quality. z Photo Quality Media z Glossy Photo Paper z Matte Photo Paper z Photo Paper Plus Double Sided z Photo Paper Plus Glossy z Photo Paper Plus Semi-gloss z Photo Paper Pro z Photo Stickers z Media
  • Canon PIXMA MP810 | Quick Start Guide - Page 16
    details, see "Changing the Paper Source" on page 15. Note You can also select the paper source using the printer driver. For details on paper source selection using the printer driver, refer to the Printer Driver Guide on-screen manual. (A) (A) Press to change the paper source 12 Before Printing
  • Canon PIXMA MP810 | Quick Start Guide - Page 17
    Paper" on page 16. z For details on printer driver settings, refer to the Printer Driver Guide on-screen manual. (A) (B) (A) Auto Sheet Feeder: Load paper of various types and sizes, including photo paper. (B) Cassette: Load paper you use most regularly, such as plain paper. Before Printing 13
  • Canon PIXMA MP810 | Quick Start Guide - Page 18
    when either paper source runs out of paper during printing. Note z For details on how to load paper, see "Loading Paper" on page 16. z For details on printer driver settings, refer to the Printer Driver Guide on-screen manual. (A) (B) (A) Auto Sheet Feeder: Load plain paper (B) Cassette: Load plain
  • Canon PIXMA MP810 | Quick Start Guide - Page 19
    Feed Switch is selected for Paper Source in the printer driver, the printer driver settings takes precedence when printing. For details on paper source selection using the printer driver, refer to the Printer Driver Guide on-screen manual. (A) (B) (C) (A) Auto Sheet Feeder lamp (B) Paper Feed Switch
  • Canon PIXMA MP810 | Quick Start Guide - Page 20
    specialty media Canon provides for use with its various printers, refer to "Printing Media" in the User's Guide on-screen manual. z For detailed instructions on how to load specialty media into the machine, refer to "Printing Media" in the User's Guide on-screen manual. When Printing on Plain Paper
  • Canon PIXMA MP810 | Quick Start Guide - Page 21
    from the package, just before printing. 2 Prepare to load paper. (A) (4) (1) (1) Open the Sheet Feeder Cover and pull out the Paper Support. (2) Open the Paper Output source with the printer driver. For details, refer to the Printer Driver Guide on-screen manual. (3) (2) Before Printing 17
  • Canon PIXMA MP810 | Quick Start Guide - Page 22
    print side facing UP. (2) Align the paper stack against the Cover Guide on the right side of the Paper Support. Note Make sure that the Cover Guide printer driver. For details on printer driver settings, see "Printing with Windows" on page 27 or "Printing leave photo paper, such as Photo Paper Pro
  • Canon PIXMA MP810 | Quick Start Guide - Page 23
    printer driver. For details on printer driver settings, see "Printing with Windows" on page 27 or "Printing with Macintosh" on page 28. z You can also select the paper source with the printer driver. For details, refer to the Printer Driver Guide onscreen manual. (3) (A) (2) (1) Before Printing
  • Canon PIXMA MP810 | Quick Start Guide - Page 24
    . or Comm. Env. #10 in the printer driver according to the envelope size you are using. If you do not, the address will be printed in the wrong direction. z Loading Envelopes in the Auto Sheet Feeder 1 Load the envelope against the Cover Guide (the right side of the Paper Support). Load with the
  • Canon PIXMA MP810 | Quick Start Guide - Page 25
    the 3 Cassette lamp lights up. *1 *1 Printing orientation 4 In the printer driver, select Envelope in Media Type, and then select DL Env. or Comm. Env. #10 in Page Size. For details on printer driver settings, see "Printing with Windows" on page 27 or "Printing with Macintosh" on page 28. Before
  • Canon PIXMA MP810 | Quick Start Guide - Page 26
    be specified on the Operation Panel when copying, or when printing from a memory card, printed photo or film. „ Setting Items in Each Mode Items in to automatically match the intensity to the original on the Platen Glass and then print the image. See "Function Buttons" on page 3. The slide bar for
  • Canon PIXMA MP810 | Quick Start Guide - Page 27
    enable manual intensity settings again and then specify the intensity. See "Function Buttons" on page 3. (3) Select the paper source. Before printing, confirm media type. Glossy Photo Paper, Matte Photo Paper, Photo Plus Glossy, Plain paper, Photo Paper Pro (6) Adjust print quality according to the
  • Canon PIXMA MP810 | Quick Start Guide - Page 28
    options are not available depending on the country of purchase. (3) Select the media type. Glossy Photo Paper, Matte Photo Paper, Photo Plus Glossy, Plain paper*, Photo Paper Pro (4) Select the print quality. Standard, High(quality-priority) * Can be selected only in Memory card mode. 24 Before
  • Canon PIXMA MP810 | Quick Start Guide - Page 29
    on page 3. You can optimize photos and advanced print settings with the functions below. Memory card mode (1) (5) (2) (6) (3) (7) (4) (8) (9) (10) (11) (12) (13) Easy photo reprint and Film print modes (14) (1) Select bordered or borderless print. Bordered, Borderless Note When Plain
  • Canon PIXMA MP810 | Quick Start Guide - Page 30
    smooths the jagged contours for printing. Image optimizer OFF, Image optimizer ON (10) Adjust brightness. Brightness -2, Brightness Simulate illustration (14) Activate/deactivate Fade restoration*2 Corrects the color when printing photos that have faded or color cast over time. Fade restoration OFF,
  • Canon PIXMA MP810 | Quick Start Guide - Page 31
    in Paper Source. Note For details on other printer driver functions, click Help or Instructions to view the online help or the Printer Driver Guide on-screen manual. Instructions is only displayed when the on-screen manuals are installed. 7 Click Print (or OK). Printing from Your Computer 27
  • Canon PIXMA MP810 | Quick Start Guide - Page 32
    Print on the application software's File menu. 9 Select Quality & Media in the pop-up menu. 10 Specify the required settings. Make sure that Paper Feed Switch is selected in Paper Source. Note For details on other printer driver functions, click to view the Printer Driver Guide on-screen manual
  • Canon PIXMA MP810 | Quick Start Guide - Page 33
    according to your needs. You can use the bundled software applications to edit or print the document you have scanned. For detailed operations of the MP Navigator, refer to the Scanning Guide on-screen manual. „ Scanning Using the Operation Panel of the Machine 1 Turn on the machine. See "Turning
  • Canon PIXMA MP810 | Quick Start Guide - Page 34
    On and Off" on page 4. 2 Select Copy on the HOME screen. See "Basic Operation for the Operation Panel" on page 2. 3 Load paper. See "Loading Printing Paper" on page 8. 4 Make sure that the proper paper source is selected. See "Changing the Paper Source" on page 15. 5 Specify copy settings
  • Canon PIXMA MP810 | Quick Start Guide - Page 35
    Using Other Copy Functions Reduced/Enlarged Copy Reduces or enlarges copies. Two-sided copy Copies two original pages onto the sides of a single sheet of paper. Borderless copy Copies color images so that they fill the entire page without borders. 2-on-1 copy Copies two original pages onto a single
  • Canon PIXMA MP810 | Quick Start Guide - Page 36
    card only 1 MB and 2 MB cards are not supported z MEMORY STICK z MEMORY STICK PRO z SD Secure Digital memory card z MultiMediaCard (v3.31) Memory cards that can be inserted in the Card Slot using the adapter: xD-Picture Card*1 z MEMORY STICK Duo*2 z MEMORY STICK PRO Duo*2 Mini SD Card*2 *1 Requires
  • Canon PIXMA MP810 | Quick Start Guide - Page 37
    Machine On and Off" on page 4. 2 Open the Card Slot Cover. 3 Insert one and only one memory card into the Card Slot. Card Type z Compact Flash (CF) card z Be sure to attach the memory card to the special adapter before inserting it into the Card Slot. 4 Confirm that the Access lamp has lit up
  • Canon PIXMA MP810 | Quick Start Guide - Page 38
    . To change the settings, select the item and press the OK button. 4 Select the photo to print and specify the number of copies for each photo. (1) Use the Easy-Scroll Wheel or the [ or ] button to display a photo to print. (2) Use the + or - button to specify the number of copies. (3) Repeat steps
  • Canon PIXMA MP810 | Quick Start Guide - Page 39
    of copies of each photo will be printed. (4) (3) Using Other Printing Functions Layout print Prints photos your pasted in the specified layout. Sticker print Prints your favorite photo with a frame on Canon Photo Stickers. DPOF print Prints according to the Digital Print Order Format (DPOF
  • Canon PIXMA MP810 | Quick Start Guide - Page 40
    button. 8 Fill in the appropriate circles in the Photo Index Sheet. 9 Load the type of paper you selected in the Photo Index Sheet. See "Loading Printing Paper" on page 8. 10 Select Scan sheet and print, then press the OK button. 11 Place the Photo Index Sheet face-down on the Platen Glass, then
  • Canon PIXMA MP810 | Quick Start Guide - Page 41
    Photo Printing from Photo or Film You can scan photos and 35 mm film into and then print them from the machine. For film, both film strips (six connected frames per strip after regular developing) and slides (one frame per mounted slide) are supported. Various effects can be applied to the images
  • Canon PIXMA MP810 | Quick Start Guide - Page 42
    close it completely. (3) (4) With the mark on the film guide facing up, load the film guide with its sides aligned to the right and left grooves of the Platen Glass. (5) Confirm that the front side of the film (the side showing the correct image) faces down. 38 Photo Printing from Photo or Film
  • Canon PIXMA MP810 | Quick Start Guide - Page 43
    sure they are not loose in the film guide. 5 Gently close the Document Cover and press the Color button. Printing Scanned Photographs 1 Prepare for printing. (1) Load paper. See "Loading Printing Paper" on page 8. (2) Scan a photo. See "Scanning a Photo" on page 37 or "Scanning a Film" on page
  • Canon PIXMA MP810 | Quick Start Guide - Page 44
    & white. (3) The specified number of copies of each photo will be printed. Other Useful Functions Sticker print Prints your favorite photo on Canon Photo Stickers to create your own stickers. Print all photos Prints all scanned photos. Using Useful Display Functions Change display The display
  • Canon PIXMA MP810 | Quick Start Guide - Page 45
    the machine. Refer to the Easy Setup Instructions to set up the machine and make it ready for printing. Note The Print Head cannot be aligned using the controls of the PictBridge compliant device. If Print Head alignment is not yet performed and the MP Drivers are not installed in the computer, be
  • Canon PIXMA MP810 | Quick Start Guide - Page 46
    connecting it to this machine according to instructions given in the device's instruction manual. (1) Make sure that the PictBridge compliant not turn on automatically, turn it on manually. (2) (3) Set up the PictBridge compliant device for direct printing. will appear on the LCD of the device
  • Canon PIXMA MP810 | Quick Start Guide - Page 47
    instructions given in the instruction manual of your PictBridge compliant device. This section describes the page size, media type, layout, image optimization modes, and date printing to those used in Canon-brand PictBridge compliant settings screen: Photo opt.pro, Vivid photo, Face brightener
  • Canon PIXMA MP810 | Quick Start Guide - Page 48
    Plus Semi-gloss Glossy Photo Paper Photo Paper Glossy Glossy Photo Paper Photo Paper Pro Photo Paper Pro *1 Exclusively used to print photo stickers. When printing on sticker paper, select 10 x 15 cm/4" x 6" in Paper size. *2 Can be selected only on certain Canon-brand PictBridge compatible devices
  • Canon PIXMA MP810 | Quick Start Guide - Page 49
    devices, depending on the model. For details, refer to your Canon-brand PictBridge compliant device's instruction manual. Shooting Info (Exif Data) You can print shooting Info (Exif Data) on photos in list format, or in the margins of specified photos. In Layout select the item with the "i" icon. 35
  • Canon PIXMA MP810 | Quick Start Guide - Page 50
    compliant device. Bordered/Borderless Select bordered or borderless print. Photo opt.pro Activate/deactivate the Photo Optimizer pro function. Automatically optimizes brightness and tone of a photo. Vivid photo Activate/deactivate Vivid photo function. Makes green and blue more lively. Face
  • Canon PIXMA MP810 | Quick Start Guide - Page 51
    Contrast Adjust contrast. Color hue Adjust color hue. Effects Applies special effects to the photo, such as printing in sepia tones or with a sketch illustration like effect. Printing Photographs Directly from a Compliant Device 47
  • Canon PIXMA MP810 | Quick Start Guide - Page 52
    flashes quickly (at around 1-second intervals). Replace the ink tank with a new one. * If an ink tank related error message is displayed on the LCD, an ink tank error has occurred and the machine is unable to print. For details, see "Error Message Is Displayed on the LCD" on page 71. 48 Routine
  • Canon PIXMA MP810 | Quick Start Guide - Page 53
    /Reset button for at least 5 seconds, and then release it. * With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink
  • Canon PIXMA MP810 | Quick Start Guide - Page 54
    out of ink, replace it immediately with a new one. 1 Open the Paper Output Tray. (1) Put your finger in the rounded indent of the Paper Output Tray and open it gently. 2 Make sure that the machine is turned on, and raise the Scanning Unit (Printer Cover) until it stops. The Print Head Holder moves
  • Canon PIXMA MP810 | Quick Start Guide - Page 55
    . Note z Do not remove more than one ink tank at a time. Be sure to replace ink tanks one by one when replacing more than one ink tank. z For details on ink lamp flashing speeds, see "Getting the Ink Level Information" on page 48. *1 Do NOT touch the Print Head Lock Lever; remove only the
  • Canon PIXMA MP810 | Quick Start Guide - Page 56
    or the Operation Panel. Note z If the error message is still displayed after the Scanning Unit (Printer Cover) is closed, see "Error Message Is Displayed on the LCD" on page 71. z When you start printing after replacing the ink tank, Print Head Cleaning is performed automatically. Do not perform any
  • Canon PIXMA MP810 | Quick Start Guide - Page 57
    , the machine automatically puts a protective cap on the Print Head to prevent the ink from drying. If you remove the power cord or switch off the power outlet strip before the POWER lamp goes out, this capping will not be done properly, causing the Print Head to dry and clog. „ When You Are Not
  • Canon PIXMA MP810 | Quick Start Guide - Page 58
    performing Print Head Cleaning twice After cleaning the Print Head, print and examine the nozzle check pattern. Step 3 See "Print Head Deep Cleaning" on page 60. Note If Print Head Deep Cleaning does not resolve the problem, the Print Head may be damaged. Contact your Canon service representative
  • Canon PIXMA MP810 | Quick Start Guide - Page 59
    nozzle check pattern to determine whether the ink ejects properly from the Print Head. Note Make sure that the Inner Cover the Paper Feed Switch to select the paper source where you have loaded paper. 4 Print the nozzle check pattern. (1) Select Settings on the HOME screen. See "Basic Operation
  • Canon PIXMA MP810 | Quick Start Guide - Page 60
    pattern, and perform cleaning if necessary. Note If the ink level is low, the nozzle check pattern is not printed correctly. Replace the relevant ink tank. See "Replacing an Ink Tank" on page 48. 1 Check the nozzle check pattern you printed. (1) (2) (1) Check if lines in this pattern are missing
  • Canon PIXMA MP810 | Quick Start Guide - Page 61
    displayed alternately. Select the pattern that is closer to the nozzle check pattern that you printed. z If There Are No Missing Lines and No White Streaks (1) Select All Yes and press the OK button to start Print Head Cleaning. See "Print Head Cleaning" on page 58. (1) (2) Routine Maintenance 57
  • Canon PIXMA MP810 | Quick Start Guide - Page 62
    nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Note that cleaning the Print Head causes used ink to be absorbed in the ink absorber. Cleaning the Print Head consumes ink, so perform Print Head Cleaning only when necessary. Note Make sure that the Inner
  • Canon PIXMA MP810 | Quick Start Guide - Page 63
    5 Check the print head condition with the printed nozzle check pattern, and take appropriate action. See "Examining the Nozzle Check Pattern" on page 56. Note If the problem is not resolved after performing steps 4 and 5 twice, try Print Head Deep Cleaning. See "Print Head Deep Cleaning" on page 60.
  • Canon PIXMA MP810 | Quick Start Guide - Page 64
    does not improve by standard Print Head Cleaning, try Print Head Deep Cleaning, which is a more powerful process. Note that cleaning the Print Head causes used ink to be absorbed in the ink absorber. Print Head Deep Cleaning consumes more ink than standard Print Head Cleaning, so perform this
  • Canon PIXMA MP810 | Quick Start Guide - Page 65
    . See "Replacing an Ink Tank" on page 48. (2) If the print head nozzles are still not clean, turn off the machine and perform another Print Head Deep Cleaning after 24 hours. (3) If this does not solve the problem, the Print Head may be damaged. Contact your Canon service representative. Routine
  • Canon PIXMA MP810 | Quick Start Guide - Page 66
    from the Cassette when performing Automatic Print Head Alignment. Always load paper in the Auto Sheet Feeder. 1 Make sure that the machine is turned on, and then load two sheets of supplied paper or A4/Letter-sized Canon Matte Photo Paper MP-101 with the printing side (whiter side) facing up. 2 Open
  • Canon PIXMA MP810 | Quick Start Guide - Page 67
    are not satisfactory, follow the procedure below to perform Manual Print Head Alignment. For details on performing Automatic Print Head Alignment, see "Automatic Print Head Alignment" on page 62. Note Screens and Manual Print Head Alignment patterns may differ from those shown in this section
  • Canon PIXMA MP810 | Quick Start Guide - Page 68
    the steps (1) and (2) until you finish inputting all pattern numbers, press the OK button. 10 When the confirmation message is displayed, press the OK button. 11 Look at the printout. From the patterns, select the best patterns for each column and input their numbers. Press the OK button. In the
  • Canon PIXMA MP810 | Quick Start Guide - Page 69
    13 Look at the printout. From the patterns, select the most even patterns for each column and input their numbers. Press the OK button. In the same way in step 9, input the numbers. 14 When the confirmation message is displayed, press the OK button. 15 Look at the printout. From the patterns, select
  • Canon PIXMA MP810 | Quick Start Guide - Page 70
    17 Look at the printout. From the patterns, select the most even patterns for each column and input their numbers. Press the OK button. In the same way in step 9, input the numbers. Note When you turn off the machine, be sure to press the ON/OFF button on the machine. Otherwise, the settings made
  • Canon PIXMA MP810 | Quick Start Guide - Page 71
    turn off the power and disconnect the power cord before cleaning the machine. z Do not use tissue paper, paper towels, or similar materials for cleaning. Paper tissue powders or fine threads may remain inside the machine and cause problems such as a blocked Print Head and poor printing results. Use
  • Canon PIXMA MP810 | Quick Start Guide - Page 72
    performing cleaning three times, contact a Canon service representative. „ Cleaning the Inside of the Machine (Bottom Plate Cleaning) This section describes how to clean the inside of the machine. If the inside of the machine becomes dirty, printed
  • Canon PIXMA MP810 | Quick Start Guide - Page 73
    If the problem is not resolved after performing cleaning again, the protrusions inside the machine may be stained. Clean them according to instructions. See Machine If protrusions inside the machine are stained, wipe off any ink from the protrusions using a cotton swab or the like. Important Before
  • Canon PIXMA MP810 | Quick Start Guide - Page 74
    find appropriate tips for your problem, refer to the on-screen manuals. z "Error Message Is Displayed on the LCD" on page 71 z "LCD Cannot Be Seen At All" on page 74 z "An Unintended Language Is Displayed on the LCD" on page 74 z "Cannot Install the MP Drivers" on page 74 z "Cannot Connect
  • Canon PIXMA MP810 | Quick Start Guide - Page 75
    When an error occurs in printing such as the machine is out of paper or paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action described in the message. The message may vary depending on the version of your Windows operating system. Error Message Is
  • Canon PIXMA MP810 | Quick Start Guide - Page 76
    "Replacing an Ink Tank" on page 48. Follow the directions given in the Easy Setup Instructions to install the Print Head. If the Print Head is already installed, remove the Print Head once and then reinstall it. If the error is not resolved, the Print Head may be damaged. Contact your Canon service
  • Canon PIXMA MP810 | Quick Start Guide - Page 77
    the ink tank. See "Replacing an Ink Tank" on page 48. "**** Error code" Turn off the machine, and unplug the power cord of the machine from the power supply. After a while, plug the power cord of the machine back in, and then turn on the machine. If the same error occurs, contact a Canon service
  • Canon PIXMA MP810 | Quick Start Guide - Page 78
    POWER lamp is off The machine is not powered on. Connect the power cord and press the ON/ OFF button. The machine will power on and the LCD will display a message. z If the POWER Printer Connection screen, follow the procedure below to reinstall the MP Drivers. (1)Click Cancel on the Printer
  • Canon PIXMA MP810 | Quick Start Guide - Page 79
    a Canon service representative. Follow the procedure described in the Easy Setup Instructions for proper installation. If the drivers were not installed correctly, uninstall the MP Drivers, restart your computer, and then reinstall the drivers. Refer to the Printer Driver Guide onscreen manual. The
  • Canon PIXMA MP810 | Quick Start Guide - Page 80
    " Message Is Displayed (Windows XP Only) Cause The machine is connected to a computer that does not support USB 2.0 Hi-Speed. Action Your system environment is not compatible with USB 2.0. See "Printing Speed Is Slow / USB 2.0 Hi-Speed Connection Does Not Work" on page 76. 76 Troubleshooting
  • Canon PIXMA MP810 | Quick Start Guide - Page 81
    the printer driver. Important Reduced printing may affect the layout depending on your document. (1)Open the printer properties dialog box. Refer to "Opening the Printer Properties Dialog Box Directly from the Start Menu" in "Opening the Printer Properties Dialog Box (Windows)" of the User's Guide
  • Canon PIXMA MP810 | Quick Start Guide - Page 82
    twice The Print Head may be damaged. Contact your Canon service representative. For details on how to print the nozzle check pattern, how to clean the Print Head, and how to perform Print Head Deep Cleaning, see "When Printing Becomes Faint or Colors Are Incorrect" on page 54. 78 Troubleshooting
  • Canon PIXMA MP810 | Quick Start Guide - Page 83
    with reduced quality. Refer to "Printing Media" in the User's Guide on-screen manual. If you did not align the Print Head after installation, straight lines may be printed misaligned. Make sure to align the Print Head after you install it. See "Automatic Print Head Alignment" on page 62 and perform
  • Canon PIXMA MP810 | Quick Start Guide - Page 84
    Box (Windows)" in the User's Guide on-screen manual. To open the Canon IJ Printer Utility (Macintosh®), refer to "Opening the Canon IJ Printer Utility (Macintosh)" in the User's Guide on-screen manual. When Prevent paper abrasion is selected, the setting is also applied to direct printing from
  • Canon PIXMA MP810 | Quick Start Guide - Page 85
    of the paper may become stained with ink. Resize your original document in your application software. For details on recommended printing area, refer to "Printing Area" in the User's Guide on-screen manual. „ Colors Are Uneven or Streaked Cause Action Print quality is not set appropriately. In
  • Canon PIXMA MP810 | Quick Start Guide - Page 86
    " in "Opening the Printer Properties Dialog Box (Windows)" of the User's Guide on-screen manual. (2)Click the Maintenance tab and then View Printer Status. (3)Click Display Print Queue. (4)Select Cancel All Documents (Purge Print Documents in Windows Me or Windows 98) on the Printer menu. You may
  • Canon PIXMA MP810 | Quick Start Guide - Page 87
    than Paper Feed Switch is selected for Paper Source in the printer driver, the printer driver settings takes precedence when printing. For details on paper source selection using the printer driver, refer to the Printer Driver Guide on-screen manual. You can load approximately up to 150 sheets of 17
  • Canon PIXMA MP810 | Quick Start Guide - Page 88
    using such paper to print documents with photos or graphics, since the printout may curl and cause paper exit jams. If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact your Canon service representative. Do not
  • Canon PIXMA MP810 | Quick Start Guide - Page 89
    you cannot remove the jammed paper or the paper jam error continues after removing the paper, contact your Canon service representative. Remove the paper following the procedure below. (1)Open off the machine in step 2, all print jobs in queue are canceled. Reprint if necessary. Troubleshooting 85
  • Canon PIXMA MP810 | Quick Start Guide - Page 90
    it into the machine correctly. If you cannot remove a sheet of paper or a teared piece of paper inside the machine, or if the paper jam error continues after removing the paper, contact your Canon service representative. 86 Troubleshooting
  • Canon PIXMA MP810 | Quick Start Guide - Page 91
    printing again. MP Drivers are not installed properly. The MP Drivers may not be installed properly. Uninstall them following the procedure described in the Printer Driver Guide on-screen manual and reinstall them following the procedure described in the Easy Setup Instructions. Troubleshooting
  • Canon PIXMA MP810 | Quick Start Guide - Page 92
    of printers and that the check box is selected. In Mac OS X v.10.2.8, check that MP810 is displayed in Printer List. (3)If MP810 is not displayed, click Add(+) to add the machine. If you cannot add the machine, follow the procedure described in the Easy Setup Instructions to reinstall the MP Drivers
  • Canon PIXMA MP810 | Quick Start Guide - Page 93
    full. Press the OK button to cancel the error so you can continue printing. However, because printing is disabled once the ink absorber becomes completely full and until the ink absorber is replaced, you are recommended to contact a Canon service representative as early as possible. (You will need
  • Canon PIXMA MP810 | Quick Start Guide - Page 94
    the directions described in the Easy Setup Instructions to install the Print Head. If the Print Head is already installed, remove the Print Head and then reinstall it. If the error is still not resolved, the Print Head may be damaged. Contact your Canon service representative. 90 Troubleshooting
  • Canon PIXMA MP810 | Quick Start Guide - Page 95
    cord of the machine from the power supply. After a while, plug the power cord of the machine back in, turn on the machine, and then reconnect the camera to the machine. If the same error occurs, contact your Canon service representative. *1 To resume printing, you can also press the OK button on
  • Canon PIXMA MP810 | Quick Start Guide - Page 96
    resolve the problem, depending on the film. In this case, scan from the computer. For details, refer to the Scanning Guide onscreen manual. Adjust Film print cutting range and rescan. See "Print Settings" in "Changing the Machine Settings" of the User's Guide onscreen manual. 92 Troubleshooting
  • Canon PIXMA MP810 | Quick Start Guide - Page 97
    version. We recommend that you keep your system up to date with Windows Update. To view the on-screen manual, double-click the MP810 On-screen Manual alias on the desktop. Note Users in Asia If you installed the User's Guide from the Manual folder in the Setup CD-ROM, open the folder in which you
  • Canon PIXMA MP810 | Quick Start Guide - Page 98
    width Acoustic noise level Operating environment Storage environment Power supply Power consumption External dimensions (with the Paper Support and Paper Output Tray retracted) Weight Print Head General Specifications 9600 (horizontal)* x 2400 (vertical) * Ink droplets can be placed with a pitch of
  • Canon PIXMA MP810 | Quick Start Guide - Page 99
    Paper Glossy Letter, Plain Paper A4/Letter) 5.4 x 8.6 cm / Credit card (Glossy Photo Paper Card Size) 20 x 25 cm / 8" x 10" (Photo Paper Pro) 10.1 x 18 cm / 4" x 7.1" (Photo Paper Pro)*2 *1 Canon-brand sticker. Printing on this paper is available only when the Layout function on your camera has a 16
  • Canon PIXMA MP810 | Quick Start Guide - Page 100
    ) does not support Windows 98 first edition. z CD-ROM drive z Display: Windows: 1024 x 768 Color 16 bit, Macintosh: 1024 x 768 Thousands Colors z Macintosh File System: Mac OS Extended (Journaled), Mac OS X Extended. Additional System Requirements for On-Screen Manuals Browser: Windows HTML Help
  • Canon PIXMA MP810 | Quick Start Guide - Page 101
    any way not described in this manual. Warning This product emits low level adapter, etc.). Never use the machine if the power cord is bundled or knotted. If you detect smoke, unusual smells or strange noises around the machine, immediately unplug the machine at the power supply and call for service
  • Canon PIXMA MP810 | Quick Start Guide - Page 102
    unplug the machine from the power outlet before cleaning the user serviceable parts inside the machine. The machine contains high-voltage components. Never attempt any maintenance procedure not described in this guide 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation free). Do not place
  • Canon PIXMA MP810 | Quick Start Guide - Page 103
    lead/cord. Working around the machine Print Heads and ink tanks Never use a power supply source other than the one rated for the machine in the country , unplug the power cord and call for service. Do not transport or store the machine on a slant, vertically or upside-down, as the ink may leak and
  • Canon PIXMA MP810 | Quick Start Guide - Page 104
    Use of Images It may be unlawful to make copies of, scan, print, or use reproductions of the following documents. The list provided is non-exhaustive (canceled or uncanceled) z Identifying badges or insignias z Selective service or draft papers z Checks or drafts issued by governmental agencies
  • Canon PIXMA MP810 | Quick Start Guide - Page 105
    service (a) for a period of one (1) year from the date of original purchase when delivered to you in new condition in its original container or (b) for 90 days from the date of original purchase for refurbished Products. Defective parts or a defective Product returned to a Canon USA repair facility
  • Canon PIXMA MP810 | Quick Start Guide - Page 106
    the user's manual or other documentation for the Product. (b) Use of parts, media, software or supplies (other than those sold by Canon USA), including nonCanon ink cartridges or refilled ink cartridges, that cause damage to the Product or cause abnormally frequent service calls or service problems
  • Canon PIXMA MP810 | Quick Start Guide - Page 107
    WHOM IT WAS PURCHASED AS A GIFT, AND STATES YOUR EXCLUSIVE REMEDY. Canon USA offers a range of customer technical support* options: z Interactive troubleshooting, e-mail technical support, the latest driver downloads and answers to frequently asked questions (www.canontechsupport.com) z Toll-free
  • Canon PIXMA MP810 | Quick Start Guide - Page 108
    Canon U.S.A., Inc. One Canon Plaza Lake Success, NY 11042 USA ©2006 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. in the United States and may also be a registered trademark in other countries. „ Mercury Legislation LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE
  • Canon PIXMA MP810 | Quick Start Guide - Page 109
    60 manual print head alignment 63 Printing from a Memory Card 32 Photo Index Sheet 36 select and print 34 Printing from Your Computer 27 Macintosh 28 Windows 27 Printing Photographs Directly from a Compliant Device 41 connecting 41 PictBridge 43 R Replacing Ink Tanks 50 ink level information
  • Canon PIXMA MP810 | Quick Start Guide - Page 110
    documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed at Cygnus Support, Inc. Cygnus Support, Inc. may not be used to endorse or promote products derived from this software without specific prior written permission
  • Canon PIXMA MP810 | Quick Start Guide - Page 111
    For additional supplies, use the following descriptions and order numbers. Description Ink Tanks PGI-5 Black CLI-8 Black CLI-8 Cyan CLI-8 Magenta CLI-8 Yellow Canon Specialty Papers Photo Paper Plus Glossy (4" x 6" / 20 sheets) Photo Paper Plus Glossy (4" x 6" / 50 sheets) Photo Paper Plus
  • Canon PIXMA MP810 | Quick Start Guide - Page 112
    The following ink tanks are compatible with this printer. QT5-0789-V04 XXXXXXXX ©CANON INC.2006 PRINTED IN THAILAND
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
Photo All-in-One
Quick Start Guide