Canon PIXMA MX310 MX310 series Easy Setup Instructions

Start Here

Easy Setup Instructions

a

Place the machine on a flat and horizontal surface, and do not

place any objects in front of the machine.

Remove all the shipping tapes and protective material on the outside of the

machine.

b

Lift the Scanning Unit (Printer Cover) with both hands, and pull

the Scanning Unit Support down into place.

Scanning Unit (Printer Cover)

Scanning Unit

Support

c

Remove the protective material on the right side.

Protective Material

Caution

Before turning on the machine, remove all of the shipping tapes.

d

Lift the Scanning Unit (Printer Cover) slightly to set the Scanning

Unit Support back to its original position, and then gently close

the Scanning Unit (Printer Cover) with both hands.

e

Connect the telephone line and any necessary external device.

You can connect an external device (telephone or answering machine) if

necessary.

Remove the Telephone connector cap to connect the external device.

Connect the telephone

line cable to the wall jack.

Telephone

Connector Cap

Connect external devices as follows:

External device jack

Telephone or answering machine

Built-in computer modem and telephone

Telephone

line

Telephone

line

Machine

Machine

Telephone or

answering machine

Telephone

Computer

LINE

TEL

Telephone line jack

Important

Be sure to use the bundled telephone line cable.

1

Prepare the Machine

f

Plug the power cord in the back of the machine and connect the

other end to the wall outlet.

Power Cord

Document Cover

Important

Make sure that the Document Cover is closed.

Do NOT connect the USB cable at this stage.

g

Press the

ON/OFF

button to turn on the machine. The machine

will initialize. Wait until the

Power

lamp stops flashing and

remains lit green.

h

Press the

[

or

]

button on the Operation Panel to select the

language for the LCD, then press the

OK

button.

LANGUAGE

SETTING

[

ENGLISH

]

Important

If an unintended language is displayed on the LCD, press the Back button to return

to the LANGUAGE SETTING screen.

Once the message “

SET INK CARTRIDGE

” appears, go to

i

.

i

Lift the Scanning Unit (Printer Cover) with both hands, and pull

the Scanning Unit Support down into place. The FINE Cartridge

Holder automatically moves to the left.

j

Write down the serial number located inside the machine. You

will need this to register your product.

Serial Number

•

•

2

Install the FINE Cartridges

a

Remove the Black FINE Cartridge from its box.

b

Remove the protective tape gently.

Protective Tape

Print Head Nozzles

Electrical Contacts

Important

Do not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge.

The machine may not print out properly if you touch it.

Do not reattach the protective tape once you have removed it.

Be careful not to stain your hands or surrounding work area with ink on the

removed protective tape.

c

Insert the Black FINE Cartridge slightly slanted into the left slot

B

.

Make sure that the message “

COVER IS OPEN

” is displayed on the LCD and

the FINE Cartridge Holder has moved to the left.

FINE Cartridge Holder

d

Push up the FINE Cartridge until it clicks into place.

Important

For correct machine operation, make sure the FINE Cartridge is securely inserted.

Click

•

•

•

e

Repeat the procedure for the Color FINE Cartridge, inserting it

into the right slot

C

.

f

Lift the Scanning Unit (Printer Cover) slightly to set the Scanning

Unit Support back to its original position, and then gently close

the Scanning Unit (Printer Cover) with both hands.

Important

Once you have installed the FINE Cartridges, the message “CART. RETURN” is

displayed on the LCD. Wait until the following message appears before proceed-

ing. It takes about one minute.

100

%

8

.5x11

STD

01

PLAIN

If the messages “IN CASE OF MISPRINT PLEASE ALIGN HEAD” and “CHECK

THCKNESS LEVER CHECK IF THCKNESS LEVER IS SET TO LEFT” are displayed

on the LCD when you start printing after preparing the machine, press the OK

button on the machine.

For details on how to align the Print Head position and adjust the position of the

Paper Thickness Lever, refer to the

Quick Start Guide

.

Hardware setup is now complete.

Next, turn over and install the software.

For fax users

To use a fax, you need to set the telephone line type setting properly on

the machine.

If you are unsure of your telephone line type, contact your telephone

company.

Select the receive mode according to your needs.

•You want to receive only faxes automatically with the machine, or have a

dedicated telephone line for fax use only:

→ FAX ONLY MODE

•You are using a single telephone line for faxes and voice calls and use

voice calls more frequently:

→ TEL PRIORITY MODE

•You are using a single telephone line for faxes and voice calls and want

to receive faxes automatically:

→ FAX PRIORITY MODE

•You have subscribed to a Distinctive Ring Pattern Detection (DRPD)

service with your telephone company:

→ DRPD

For details on how to confirm and change the settings, refer to the

Quick

Start Guide

.

•

•

Office All-In-One

QT51361V02

Unpack the Machine

Please confirm the included items against the illustration printed on the lid of the packing box.

A USB cable is necessary to connect the machine with your computer.

•

•

Important

When cleaning the exterior of the machine, use a soft cloth to wipe it gently. For details, refer to “Cleaning Your Machine” in the

Quick Start Guide

.

Canon PIXMA MX310 MX310 series Easy Setup Instructions

Canon PIXMA MX310 Manual

Canon PIXMA MX310 manual content summary: