Canon PIXMA MX320 On-Screen Manual - Page 11

Main Components Changes the page size, media type, and print quality settings in each mode. (7) LCD (Liquid Crystal Display) Displays messages, menu selections, and the operational status. Page 11 of 817 pages Note The LCD will turn off if the machine is not operated for about 5 minutes. To restore the display, press any button except the ON button or perform the print operation. The display will be also restored when receiving faxes. (8) Numeric buttons Used to enter numerical values such as the number of copies, as well as fax/telephone numbers and characters. (9) Redial/Pause button Used to select and redial a number recently dialed using the Numeric buttons. Also to enter pause time between or after numbers when dialing or registering numbers for example International calls. (10) Coded Dial button Displays the search telephone number screen. Enter the first letter of a pre-registered name to search a pre-registered fax/telephone number or group, and use the (-) or (+) button to select a desired destination. Press the button to switch to the coded speed dial screen. Enter a two-digit code to select a desired destination. You can also use the (-) or (+) button to select a desired destination. (11) Black button Starts to make black & white print, copy, scan, fax, etc. (12) Stop button Cancels operation when print, transmission, or scan job is in progress. (13) Color button Starts to make color print, copy, scan, fax, etc. (14) FAX Quality button Selects the scan resolution and contrast of the fax you are sending. (15) Tone button In the fax mode, switches to tone dialing temporarily or used to dial with the Numeric buttons, and also changes the input mode when entering characters. (16) OK button Selects a menu or setting item. See How to Navigate Menus on the LCD . Resolves an error when printing is in progress or resumes the machine's normal operation after removing jammed paper or to eject documents remaining in the ADF. (17) (-) (+) buttons Scrolls through menu selections and increases/decreases setting values, such as the number of copies. Also, the (-) button cancels the entered character, and the (+) button enters a space between characters when entering characters. (18) Back button Cancels operations and returns the LCD to the previous screen. (19) Alarm lamp Lights or flashes orange when an error, such as paper-out or ink-out, occurs. (20) In Use/Memory lamp Flashes when sending or receiving faxes, and lights when there are documents saved in the machine's memory. Note The machine makes the beep sound when pressing buttons on the Operation Panel. To change the beep volume, see Machine Settings.