Canon PIXMA MX320 On-Screen Manual - Page 151

Printing Page 151 of 817 pages Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos > Printing Printing 1. Click Layout/Print. The Layout/Print screen appears. Important The thumbnails (reduced images) displayed in the screen may appear as follows: - A black line appears along an edge of the image. - An edge of the image appears cropped. However, such images will be displayed normally when enlarged or previewed, and print results will not be affected. 2. Select a layout you want to use. Click a borderless layout to print borderless photos. Note The layouts that can be selected may vary depending on the printer, paper size, and media type. 3. Click Print. Important When you print on large size paper such as A3/A3+, some computers cannot print properly if you print more than one page or copy at a time. It is recommended that you print page by page when you print on such paper. While printing on paper larger than A4 or printing high-resolution images, data may be printed only to the middle if many images are printed at one time. In such cases, select the Spool print job page by page checkbox in the Preferences dialog box, and then print again. To display the Preferences dialog box, click (Settings) or select Preferences... from the File menu. When Fine Art is selected for Paper Size, a 1.38 inch (35 mm) margin is automatically left at the top and bottom of the paper. It is recommended that you check the print range with the image shown in Preview before printing.