Canon PIXMA MX320 On-Screen Manual - Page 17

How to Navigate Menus on the LCD Page 17 of 817 pages Bottom cleaning*2 *2 For details on the Bottom cleaning, refer to the on-screen manual: Advanced Guide. Basic Operation on the Setting Options You can change the settings in each mode by pressing the Settings button, when printing in the copy mode or fax mode or when saving scanned data on a USB flash drive in the scan mode. You can change the print settings such as page size, media type, etc. This section describes the procedure to change the settings, taking the procedure to specify 4"x6"(10x15cm) for the page size in the copy mode as an example. When printing from a computer, see Printing from Your Computer. Note To change the settings when printing from a PictBridge compliant device or wireless communication device, refer to the on-screen manual: Advanced Guide. 1. Display the setting options. (1) Press the COPY button to switch to the copy mode. (2) Press the Settings button repeatedly until Page size appears. 2. Change the setting. (1) Use the (-) or (+) button to select the page size. Example: Select 4"x6"(10x15cm) here. (2) Press the OK button. Note To change setting other than Page size, press the Settings button repeatedly until the desired option appears. For details on the setting options specified by the Settings button For the settings in the copy mode, see Changing the Settings. For the settings in the fax mode, see Preparing for Receiving a Fax . You can also change the image quality or density of sending faxes with the FAX Quality button.For details, see Sending a Fax with the Numeric Buttons . Page top