Canon PIXMA MX320 On-Screen Manual - Page 26

Entering the Date and Time Page 26 of 817 pages Advanced Guide Troubleshooting Contents > Setting Up the Machine > Specifying the Basic Settings for the Machine > Entering the Date and Time Entering the Date and Time Note Three date display formats are available: YYYY/MM/DD, MM/DD/YYYY, and DD/MM/YYYY. For details, refer to the on-screen manual: Advanced Guide. When the machine is connected to a computer with the MP Drivers installed, the date and time setting will be copied from the computer to the machine. As long as the date and time is set accurately on your computer, you do not need to set it on the machine. If you disconnect the power plug or when there is a power failure, the date and time setting on the machine will be reset. When you connect the machine to a computer with the MP Drivers installed, the setting will be copied to the machine once again. 1. Display the Date/time setting screen. (1) Press the FAX button, and press the Menu button. The Fax settings menu will appear. (2) Use the (-) or (+) button to select User settings, and press the OK button. The User settings menu will appear. (3) Use the (-) or (+) button to select Date/time setting, and press the OK button. 2. Enter the date and time. (1) Use the Numeric buttons to enter the date and time (in 24-hour format). Enter only the last two digits of the year. Note If you misentered the date and time, press the under the number to enter the correct number. (-) or (+) button to move the cursor (2) Press the OK button. 3. Return to the fax standby screen. (1) Press the FAX button. Page top