Canon PIXMA MX320 On-Screen Manual - Page 5
of 817 s, Safety Precautions - ink cartridges
View all Canon PIXMA MX320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Safety Precautions unplug the power cord and call for service. Do not transport or use the machine on a slant, vertically or upside-down, as the ink may leak and damage the machine. When loading a thick book on the Platen Glass, do not press hard on the Document Cover. The Platen Glass may break and cause injury. FINE Cartridges Keep FINE Cartridges (Ink Cartridges) out of the reach of (Ink Cartridges) children. In case ink is accidentally licked or swallowed, rinse out mouth or give one or two glasses of water to drink. If irritation or discomfort occurs, obtain medical advice immediately. In case ink gets in contact with eyes, rinse with water immediately. In case ink gets in contact with skin, wash with soap and water immediately. If irritation to eyes or skin persists, obtain medical advice immediately. Do not shake FINE Cartridges (Ink Cartridges). Ink may spill out and stain clothing or the surrounding area. Never touch the electrical contacts or print head nozzles on a FINE Cartridge (Ink Cartridge) after printing. The metal parts may be very hot and could cause burns. Do not throw FINE Cartridges (Ink Cartridges) into fire. Do not attempt to disassemble or modify the FINE Cartridges. Do not handle the FINE Cartridges roughly such as applying them excessive pressure or dropping them. Do not rinse or wipe the FINE Cartridges. Page 5 of 817 pages Once you have installed the FINE Cartridges, do not remove them unnecessarily. Note when you place the machine near other electrical appliances such as fluorescent lamps Place the machine at least 5.91 inches / 15 cm away from other electrical appliances such as fluorescent lamps. If the machine is placed closer to those, it may not be able to work properly due to fluorescent noises. When you disconnect the power plug When you disconnect the power plug, always press the ON button and be sure that the light of the ON button (in green) goes out. If you disconnect the power plug from the power outlet when the ON button is lit or flashing, the Print Head cannot be protected and you may not be able to print later. Page top