Canon PIXMA MX320 On-Screen Manual - Page 557

Adjusting Cropping Frames Page 557 of 817 pages Advanced Guide > Scanning > Scanning with Other Application Software > Appendix: Useful Information on Scanning > Adjusting Cropping Frames Adjusting Cropping Frames You can specify the scan area by creating a cropping frame on the image displayed in the Preview area of the ScanGear (scanner driver) screen. When you click Scan, only the portion within the cropping frame will be scanned and passed to the application. You can create multiple cropping frames. When you click Scan, all cropping frames will be scanned. (Scan is repeated for each cropping frame.) Important You cannot create additional cropping frames when you used Multi-Crop in ScanGear's Advanced Mode tab. Cropping frame types (1) Focus Cropping Frame (rotating thick broken lines) The settings in Basic Mode or Advanced Mode will be applied. (2) Selected Cropping Frame (stationary thick broken lines) The settings will be applied to the Focus Cropping Frame and Selected Cropping Frames simultaneously. You can select multiple cropping frames by clicking them while pressing the Ctrl key. (3) Unselected Cropping Frame (stationary thin broken lines) The settings will not be applied. Initial cropping frame A cropping frame (Focus Cropping Frame) is displayed automatically around the preview image according to the document size. You can also create a cropping frame by dragging the mouse in the Preview area. Adjusting a cropping frame The cursor will change into when it is positioned over a cropping frame. If you click and drag the mouse in the direction of the arrow, the cropping frame will expand or contract accordingly. The cursor will change into when it is positioned within a cropping frame. Click and drag the mouse to move the entire cropping frame. You can rotate a cropping frame 90 degrees by clicking (Switch Aspect Ratio). However, Aspect Ratio) is not available when Output Size is Flexible. (Switch