Canon PIXMA MX320 On-Screen Manual - Page 590

Changing the Print Settings Page 590 of 817 pages Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Changing the Print Settings Changing the Print Settings This machine prints received faxes to paper loaded on the Rear Tray. You can use the Operation Panel to change the paper settings for printing faxes. Make sure that the settings are appropriate for the loaded paper. Important If paper other than A4, Letter-, or Legal-sized paper is loaded, the received faxes are stored in memory and Change the paper A4/LTR/Legal Plain paper is displayed on the LCD. In this case, replace the loaded paper with A4, Letter-, or Legal-sized* paper, then press the OK button. You can also press the Stop button to close the message and print the stored documents in memory later. For details, see Printing a Document in Memory . * Legal may not be available depending on the country or region of purchase. Note If the sender sends a document that is larger than Letter-size or Legal-size, such as 11" x17", the sender's machine may send the fax automatically reduced in size or divided, or send only a part of the original. 1. Press the FAX button. 2. Press the Settings button. 3. Use the button to select A4, 8.5"x11"(LTR), or Legal (or 8.5"x14"), then press the OK button. 4. Use the button to select Plain paper, then press the OK button. The LCD returns to the FAX standby screen. Page top