Canon PIXMA MX320 On-Screen Manual - Page 597

Using the Caller ID Service to Reject Calls Page 597 of 817 pages Advanced Guide > Faxing > Sending/Receiving Faxes Using the Operation Panel of the Machine > Using the Caller ID Service to Reject Calls Using the Caller ID Service to Reject Calls If you subscribe to the Caller ID service, the machine detects the sender's Caller ID. If the sender's ID does not match the conditions specified in this setting, the machine rejects the phone call or fax reception from the sender. 1. Press the FAX button, then press the Menu button. The Fax settings screen is displayed. 2. Use the button to select Reception settings, then press the OK button. 3. Use the button to select Caller rejection, then press the OK button. 4. Use the button to select Subscribed, then press the OK button. You can now perform settings for Caller rejection. 5. Use the button to select the phone call or fax rejection condition, then press the OK button. Set the conditions below. Anonymous number Selects whether to reject a phone call or fax reception from a sender with no caller identification. Out of area Selects whether to reject a phone call or fax reception out of the subscribed service area. Rejected numbers Selects whether to reject a phone call or fax reception from the numbers registered to Rejected numbers in Fax reception reject. For details, see Rejecting Fax Reception. Reject: Rejects the phone call or fax reception matching the condition specified by this setting. If you select Reject for Rejected numbers, Register rejected no.? is displayed on the LCD. Select Yes to register a fax/telephone number to reject. For details, see Rejecting Fax Reception. Accept: Allows the phone call or fax reception matching the condition specified by this setting. Note This setting may not be supported depending on the country or region of purchase. Contact your telephone company to confirm whether it provides this service. Page top