Canon PIXMA MX320 On-Screen Manual - Page 60

Sending Faxes The machine starts sending the fax. Page 60 of 817 pages Note When loading two or more documents Load the next page, and press the same button as you pressed in (2) of step 2. Repeat the same procedure to scan all pages of the document, and press the OK button. When you have sent the first page with the Black button, the following pages will be sent in black and white. When the document was loaded in the ADF: (1) Use the Numeric buttons to dial the recipient's number. (2) Press the Color button for color sending, or the Black button for black & white sending. The machine scans the document automatically and starts sending the fax. Important Color sending requires that the recipient's fax machine supports color faxing. Note To cancel sending a fax, press the Stop button, and follow the instructions on the LCD. If documents remain in the ADF after pressing the Stop button during scanning, "Close the feeder cover [OK] Eject the document" will appear on the LCD. Press the OK button so that the remaining document is automatically fed out. Automatic redialing When sending a fax and the recipient's line is busy, the machine will redial the number after a specified interval. Auto redial is enabled by default. Auto redial can be enabled or disabled by selecting ON or OFF. Select ON to specify the number of redialing in Redial times and redialing interval in Redial interval. Redialing the Number Dialed with the Numeric Buttons 1. Prepare for sending a fax. (1) Make sure that the power is turned on. See Operation Panel. (2) Load a document on the Platen Glass or in the ADF. See Loading Originals. (3) Press the FAX button. The fax standby screen will appear. (4) Adjust the image density (scan contrast) or quality (fax resolution) as necessary. See Adjusting the Sending Quality . 2. Select the telephone number recently dialed. (1) Press the Redial/Pause button. Most recently dialed fax number using the Numeric buttons will appear. (2) Use the (-) or (+) button to select the number to redial. (3) Press the OK button. The selected number will appear in the fax standby screen.