Canon PIXMA MX320 On-Screen Manual - Page 624

About PictBridge Print Settings Page 624 of 817 pages Advanced Guide > Printing Photographs Directly from a Compliant Device or a Wireless Communication Device > Printing Photographs Directly from a Compliant Device > About PictBridge Print Settings About PictBridge Print Settings Settings on a PictBridge Compliant Device Settings on the Machine Settings on a PictBridge Compliant Device This section describes the PictBridge function of the machine. For the print settings on a PictBridge compliant device, refer to the instructions given in the device's instruction manual. Note In the following description, names of setting items are given according to those used in Canon-brand PictBridge compliant devices. Setting item names may be different depending on the brand or model of your device. Some setting items explained below may not be available on some devices. In this case, the settings made on the machine are applied. Also, when some items are set to Default on a PictBridge compliant device, the machine settings for these items are applied. Settings on the Machine The following settings can be used when printing from a PictBridge compliant device. Paper size 4" x 6"/10 x 15 cm, 5" x 7"*1, 8" x 10"/ 20 x 25 cm, A4, 8.5" x 11"(Letter), 4" x 7.1"/ 10.1 x 18 cm*2 *1 10x15 may appear on some PictBridge compliant device. *2 Hi Vision may appear on a non-Canon brand PictBridge compliant device. Paper type Default (Selections based on the machine setting) Photo: Photo Paper Plus Glossy II PP-201/Glossy Photo Paper "Everyday Use" GP501/Photo Paper Glossy GP-502/Photo Paper Plus Semi-gloss SG-201 Fast Photo: Photo Paper Pro II PR-201 Plain: A4/Letter When Paper type is set to Plain, borderless printing will be disabled even when Layout is set to Borderless. Layout Print date & file no. Image optimize Default (Selections based on the machine setting), Index, Bordered, Borderless, 4-up* * Layout compatible with A4/Letter sized paper Default (Off: No printing), Date, File No., Both, Off Default *1, On (Exif Print), Off, Face*2, Red-Eye*2 *1 Photos are optimized for printing using the Photo optimizer pro function. *2 Can be selected only on certain Canon-brand PictBridge compliant devices. (May not be selected depending on the device.) Trimming Default (Off: No trimming), On (follow the camera's setting), Off Settings on the Machine You can change the PictBridge print settings from the PictBridge settings screen. Set the print settings to Default on the PictBridge compliant device when you want to print according to the settings on the machine. This section describes the procedure to display the PictBridge settings screen. For setting items, see PictBridge settings. 1. Make sure that the machine is turned on. 2. Press the Menu button repeatedly until Device settings appears.