Canon PIXMA MX320 On-Screen Manual - Page 628

Printing via Bluetooth Communication Page 628 of 817 pages Advanced Guide > Printing Photographs Directly from a Compliant Device or a Wireless Communication Device > Printing Photographs from a Wireless Communication Device > Printing via Bluetooth Communication Printing via Bluetooth Communication This section describes the procedure to print photos through Bluetooth communication from a mobile phone with the optional Bluetooth Unit BU-30. When printing from a mobile phone through Bluetooth communication, refer also to your product's instruction manual. For the procedure to print through Bluetooth communication from the computer, refer to About Bluetooth Communication. Note Mobile phones supporting OPP (Object Push Profile) or BIP (Basic Imaging Profile) can be used to print photos. Depending on your mobile phone, you may not perform printing even if your mobile phone supports the profiles above. For information on the profiles your mobile phone supports, refer to your product's instruction manual. Printing through Bluetooth Communication 1. Make sure that the machine is turned on. 2. Load paper. 3. Attach the optional Bluetooth Unit BU-30. Insert the Bluetooth Unit BU-30 to the Direct Print Port. 4. Set the page size and layout. Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone 5. Start printing from a mobile phone. For the device name, select the default value Canon XXX-1 (where "XXX" is your machine's name). If you are required to input a passkey, input the default value "0000". You can change the device name of the machine, passkey, and so on from the Bluetooth settings screen. Changing the Bluetooth Settings Note