Canon PIXMA MX320 On-Screen Manual - Page 705

An Error Message Is Displayed on the LCD Page 705 of 817 pages Note If the function for detecting the remaining ink level is disabled, is displayed on the LCD. Routine Maintenance Since printing in this condition may cause the contents of the fax to be lost, the machine stores received faxes in memory without printing until the FINE Cartridge is replaced. Print the fax stored in memory manually after replacing the FINE Cartridge. You can set the machine to print received faxes forcibly without storing them in memory, but a part of contents or all contents of the fax may not be printed. Contact service center 5B00 Printer error has occurred Timeout error Press [OK] Incompatible device Disconnect the cable from direct print port Unsupported USB hub Remove hub B200 Printer error has occurred Contact service center The ink absorber is almost full. Press the machine's OK button to continue printing. Contact the service center. The machine error has occurred. Contact the service center. Some errors occurred while copying and a certain time passed. Press the OK button to dismiss the error, and try to copy again. Check the device connected to the Direct Print Port. Printing photos directly is possible with a PictBridge compliant device or the optional Bluetooth Unit BU-30. A communication time out occurs if an operation takes too long or if it takes too much time to send data. This may cancel printing. In such cases, disconnect and reconnect the USB cable. When printing from a PictBridge compliant device, depending on the model or brand of your device, you may have to select a PictBridge compliant print mode on the device before connecting it to the machine. You may also have to turn on your device or select Play mode manually after connecting the device to the machine. Perform necessary operations before connecting your device referring to its instruction manual. If the error is still not resolved, check if you can print another photograph. If a PictBridge compliant device is connected via a USB hub, remove the hub and connect it directly to the machine. Turn off the machine, and unplug the power cord of the machine from the power supply. Contact the service center. Important If you disconnect the power plug, all the documents stored in memory are deleted. **** Printer error has occurred "****" is displayed in the alphanumeric character and depends on the error occurred. 5100 is displayed: Cancel printing, turn off the machine. Then clear the jammed paper or protective material that is preventing the FINE Cartridge Holder from moving, and turn on the machine again. Important Be careful not to touch the components inside the machine. The machine may not print out properly if you touch it. If the problem is not resolved, contact the service