Canon PIXMA MX320 On-Screen Manual - Page 734

Machine Moves But Ink Is Not Ejected Page 734 of 817 pages Advanced Guide > Troubleshooting > Machine Moves But Ink Is Not Ejected Machine Moves But Ink Is Not Ejected Check 1: Are the Print Head nozzles clogged? Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles. Refer to Routine Maintenance for the Nozzle Check Pattern printing, Print Head Cleaning, and Print Head Deep Cleaning. If the Nozzle Check Pattern is not printed correctly: After performing the Print Head Cleaning, print the Nozzle Check Pattern and examine the pattern. If the problem is not resolved after performing the Print Head Cleaning twice: Perform the Print Head Deep Cleaning. If the problem is not resolved after performing the Print Head Deep Cleaning, turn off the machine and perform another Print Head Deep Cleaning after 24 hours. When you turn the machine off, do not unplug it from the power supply. If the problem is not resolved after performing the Print Head Deep Cleaning twice: Ink may have run out. Replace the FINE Cartridge. Check 2: Is the FINE Cartridge installed properly? If the Ink Cartridge Locking Cover is not closed securely, ink may not be ejected correctly. Open the Scanning Unit (Cover), open the Ink Cartridge Locking Cover, then close the Ink Cartridge Locking Cover. When you close the Ink Cartridge Locking Cover, push the Ink Cartridge Locking Cover until it clicks into place. Check 3: When a FINE Cartridge runs out of ink, replace it with a new one. Page top