Canon PIXMA MX320 On-Screen Manual - Page 96

Loading an Original on the Platen Glass Page 96 of 817 pages Advanced Guide Troubleshooting Contents > Loading Paper / Originals > Loading Originals > Loading an Original on the Platen Glass Loading an Original on the Platen Glass Load originals to copy, fax, or scan an original on the Platen Glass. Important After loading the original, be sure to close the Document Cover before starting to copy, fax, or scan. When scanning from a computer using a software application or saving the scanned data by selecting PC on the Save to menu in the scan mode using the Operation Panel on the machine, you need to load originals in a different way. For details, refer to the on-screen manual: Advanced Guide. 1. Load an original on the Platen Glass. (1) Open the Document Cover. Important Do not place any object on the Document Cover. It will fall into the Rear Tray when the Document Cover is opened and cause the machine to malfunction. (2) Load the original with the side to copy, fax, or scan FACING DOWN on the Platen Glass. Align the corner of the original with the alignment mark . Important Do not place any object weighing more than 4.4 lb / 2.0 kg on the Platen Glass. Do not press or put weight on the original with pressure exceeding 4.4 lb / 2.0 kg. Doing so may cause the scanner to malfunction or the Platen Glass to break. The machine cannot scan the shaded area (A) (0.04 inches / 1 mm from the edges of the Platen Glass). When you press the SCAN button to select USB flash drive, and specify Scan size, Scan