Canon PIXMA MX340 MX340 series Network Setup Troubleshooting - Page 9
Reference Information - software
View all Canon PIXMA MX340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Reference Information Configuring the Access Point's Wireless LAN Settings Manually Action Enter the access point name/network name (SSID) and security setting (WEP, WPA, etc.) directly. Follow the procedure below. 1 Perform to in "Install the Software (2)" on page 27 in the printed manual: Getting Started. • If the Detected Access Points List screen is displayed, go to . 2 When the Confirm Connection Access Point screen appears, click No (A). • The Detected Access Points List screen is displayed. A 3 Click Manual Setup (B). • The Manual Setup screen is displayed. B 4 Enter the access point name/network name (SSID) in SSID (C). C 5 Select the security protocol for the access D point in Encryption Method (D), then click Configuration (E). • Go to either of the following steps according to the selected Encryption Method (security protocol). E Disable Go to on page 8. WEP Go to . WPA/WPA2 Go to on page 8. 6-A WEP WPA/WPA2 Disable F G H I J (P.8) (P.8) K 1 Enter the network key in WEP Key (F). • Enter upper and lower case letters of the alphabet correctly when the network key is 5 or 13 characters. Letters are case sensitive. Letters are not case sensitive if the network key is 10 or 26 characters (digits). 2 Select Key Length (G). • When WEP 40 bit is selected in AirPort Utility (AirPort Admin Utility), select 64 bit. • When WEP (Transitional Security Network) is selected in AirPort Utility, select 128 bit. 3 Select Key Format (H). • Select Characters when the network key is 5 or 13 characters. Select Hexadecimal when it is 10 or 26 characters (digits). 4 Select Key ID (I). • When using AirPort, select 1 in the screen. Selecting other key numbers will disable the connection between the machine and AirPort. 5 Select Authentication (J), then click OK (K). Go to on page 8.