Canon PIXMA MX350 Network Setup Troubleshooting - Page 16

©canon Inc.2010, Printed In X

Add to My Manuals
Save this manual to your list of manuals

QT5-2855-V01 XXXXXXXX ©CANON INC.2010 PRINTED IN XXXXXXXX

Section	Page
Problems during Network Setup	3
Advanced setup / Easy setup	3
The Target Access Point is Not Displayed (Detected)	3
Access point was not detected. is Displayed	4
Failed to connect to the access point. is Displayed	4
Multiple access points with the same name exist. is Displayed	5
The directly entered access point was not detected. is Displayed	5
The device may not be able to connect to the network is Displayed	6
WPS	7
Cannot connect. Multiple access points are enabled. is Displayed	7
Connection failed. is Displayed	7
Problems during Software Installation	7
The Machine is Not Displayed (Detected)	7
Check Printer Settings dialog box is Displayed	8
Other Troubleshooting Tips	9
Forgotten or Do Not Know the Access Point Name/Network Name (SSID), Security Protocol (encryption standard), and Network Key	9
The Machine is Not Detected after the Network Environment is Changed	9
Reference Information	10
Character Entry	10
Entering the Access Point's Wireless LAN Settings Directly on the Machine	11
Specifying the Machine's IP Address (IPv4 only)	13
Restoring the Machine's Default LAN Settings to Perform Setup Again	13

Match case Limit results 1 per page

QT5-2855-V01

XXXXXXXX

PRINTED IN XXXXXXXX