Canon PIXMA MX860 Network Setup Troubleshooting
Canon PIXMA MX860 Manual
 |
View all Canon PIXMA MX860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon PIXMA MX860 manual content summary:
- Canon PIXMA MX860 | Network Setup Troubleshooting - Page 1
Network Setup Troubleshooting - Canon PIXMA MX860 | Network Setup Troubleshooting - Page 2
Network Setup Troubleshooting This manual describes troubleshooting tips for problems you may encounter when setting up. • If you do not find a description for your trouble here, refer to "Troubleshooting" in the on-screen manual: Basic Guide/Advanced Guide. ■ Troubles in Setup/Connections 1 - Canon PIXMA MX860 | Network Setup Troubleshooting - Page 3
enabled, we recommend that you register the machine's MAC address to the access point before entering setup. To confirm the MAC address of the machine, refer to "About Network Communication" - "Troubleshooting" in the on-screen manual: Advanced Guide. • If the access point's IP address filtering is - Canon PIXMA MX860 | Network Setup Troubleshooting - Page 4
computer or your wireless network device. Make sure that the channel set to the access point is valid to communicate with the computer, confirmed above. If not, change the channel set to the access point. 4.2 No machine is detected after the network settings are changed in Windows Wait until the - Canon PIXMA MX860 | Network Setup Troubleshooting - Page 5
To change the settings, click the Configuration in the Manual Setup dialog. For details, refer to "3.1 About Network Key (Windows)/Network Password and changed. (D) Connect Connects to the specified access point. 5.2 The An access point could not be detected is displayed during setup This message - Canon PIXMA MX860 | Network Setup Troubleshooting - Page 6
setup Uninstall the drivers, then setup the machine again following the procedures in "Install the Software" and onward in the printed manual: Getting Started. 5.6 The Set Printer IP Address screen is displayed during setup The following screen is displayed if no machine was detected on the network - Canon PIXMA MX860 | Network Setup Troubleshooting - Page 7
it appears, click OK. • If the problem is not resolved, click Skip to complete the setup without the network setup of the Card Slot. To mount the Card Slot manually, refer to "Cannot Mount the Card Slot" in "About Network Communication" in "Troubleshooting" of the on-screen manual: Advanced Guide. - Canon PIXMA MX860 | Network Setup Troubleshooting - Page 8
assigned is displayed during setup Click Skip to complete the setup. After software installation is complete, remove any drive letter and try the network setup of the Card Slot again using the Canon IJ Network Tool. 5.12 The Timeout error screen is displayed during WPS setup This screen is displayed - Canon PIXMA MX860 | Network Setup Troubleshooting - Page 9
LAN settings, then press the OK button. d Select Reset LAN settings and press the OK button. The machine's network settings are restored to factory defaults. Factory Default Wireless LAN SSID Data encryption TCP/IP settings Wired LAN TCP/IP settings Active BJNPSETUP Disable Obtain an IP address - Canon PIXMA MX860 | Network Setup Troubleshooting - Page 10
Setup) and WCN (Windows Connect Now). 8 inches /203.2 mm (for Borderless Printing: 8.5 inches/216 mm) Approx. 43.5 db(A) * When printing in the standard print quality mode on Photo driver TWAIN/WIA (Windows Vista and Windows protocol Wireless LAN TCP/IP Network Specifications Supported Standards: - Canon PIXMA MX860 | Network Setup Troubleshooting - Page 11
upgrade from Windows XP to Windows Vista, first uninstall software bundled with the Canon inkjet printer. • Macintosh: Hard Disk must be formatted as Mac OS Extended (Journaled) or Mac OS Extended. Additional System Requirements for the on-screen manuals Browser: Easy Guide Viewer Note: Microsoft - Canon PIXMA MX860 | Network Setup Troubleshooting - Page 12
QT5-2117-V01 XXXXXXXX ©CANON INC.2009 PRINTED IN THAILAND
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
Network Setup Troubleshooting