Canon PIXMA iP1500 Service Manual

Canon PIXMA iP1500 Manual

Get Canon PIXMA iP1500 PDF manuals and user guides View all Canon PIXMA iP1500 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon PIXMA iP1500 manual content summary:

  • Canon PIXMA iP1500 | Service Manual - Page 1
    PIXMA iP1500 SERVICE MANUAL Canon Copyright 2004, Canon U.S.A. This technical publication is the proprietary and confidential information of Canon U.S.A. which shall be retained for reference purposes by Authorized Service Facilities of Canon U.S.A. Its unauthorized use is prohibited.
  • Canon PIXMA iP1500 | Service Manual - Page 2
    1. PRODUCT LIST 1-1. Main Units Product name Canon Bubble Jet Printer iP1500 1-2. Options None 1-3. Consumables Product name Canon Ink Tank BCI-24 Black Canon Ink Tank BCI-24 Color Canon Ink Tank BCI-24 Black Twin Pack Canon Ink Tank BCI-24 Color Twin Pack Product code 9319A001AA 9319A002AA
  • Canon PIXMA iP1500 | Service Manual - Page 3
    or less Envelope 10 sheets or less T-shirt Transfer 1 sheet Photo Stickers 1 sheet Borderless printing Detection function Cover open Presence of print head Presence of ink tank Presence of paper Paper width Waste ink absorber full Remaining ink amount Print head alignment Acoustic noise
  • Canon PIXMA iP1500 | Service Manual - Page 4
    -24 Black, BCI-24 Color Weight Approx. 58g (excluding ink tanks) Supply method Service part (excluding ink tanks) Part number: QY6-0054-000 Print head life 4,000 pages (Same as the printer main unit) Note: Although the print head can be physically installed in the i350, i355, i250, i255, S300
  • Canon PIXMA iP1500 | Service Manual - Page 5
    Paper jam 4 times Ink tank not installed 5 times 8 times Print head not installed or failure has occurred in the print head. (Non-supported print head (see page 4) is installed or print head EEPROM data is abnormal.) Waste ink absorber full or platen waste ink absorber full warning (approx. 95
  • Canon PIXMA iP1500 | Service Manual - Page 6
    remaining ink level detection is enabled, and no Status Monitor display when disabled.) Note: The Status Monitor display in the table below is for Windows. Warning Display by Status Monitor Ink low warning 1 (approx. half level) Ink low warning 2 (low remaining ink) Ink low warning 3 (ink level
  • Canon PIXMA iP1500 | Service Manual - Page 7
    (Windows 98 / ME / 2000 / XP), printer driver and service tool (QY9-0066) for the iP1500 are needed. Function Procedure Remarks Print head manual cleaning Select "Cleaning" from the printer driver's Maintenance. Cleaning time: Approx. 40 sec. Print head deep cleaning Select
  • Canon PIXMA iP1500 | Service Manual - Page 8
    5. EXTERNAL VIEW / PARTS LIST 5-1. External Parts, Power Supply Unit, Logic Board Ass'y 5-2. Print Unit ( 8 / 21 )
  • Canon PIXMA iP1500 | Service Manual - Page 9
    QC1-5104-000 I 10 QC1-4998-000 I 11 QC1-1690-000 I 12 QM2-1445-000 I 13 QM2-1443-000 I 14 QC1-4975-000 I 15 QC1-4976-000 I 16 QM2-1847-000 I S1 XA9-1493-000 G 1 PRINT HEAD 1 PAPER SUPPORT UPPER COVER UNIT, WITH 1 BUTTON 1 COVER, I/F 1 EMBLEM (E) 1 EMBLEM (J) 1 LABEL, PIXMA (E) 1 FRONT COVER 1 LOGIC
  • Canon PIXMA iP1500 | Service Manual - Page 10
    pattern, and reset the EEPROM, following the procedures in 4. SERVICE MODE. 3. Press the Power button to turn off the printer. (The paper lifting plate is raised, and the carriage moves to the print head replacement position.) Remove the print head. (DO NOT print after this point.) ( 10 / 21 )
  • Canon PIXMA iP1500 | Service Manual - Page 11
    6-2. Print Head Troubleshooting Flowchart (print head operation confirmation) Connect to computer Nozzle check pattern printing See 4. SERVICE MODE for printing method. Correct? Yes No Print head cleaning See 4. SERVICE MODE for cleaning method. Nozzle check pattern printing Correct? Yes
  • Canon PIXMA iP1500 | Service Manual - Page 12
    at full) 2. Resetting the replaced waste ink absorber counter - At main waste ink absorber replacement: In the iP1500 service tool CLEAR WASTE INK COUNTER section, click MAIN to reset the main waste ink counter value. - At platen waste ink absorber replacement: In the iP1500 service tool CLEAR WASTE
  • Canon PIXMA iP1500 | Service Manual - Page 13
    iP1500, the LF and CR motors and the LF encoder are soldered to the logic board ass'y, and the connectors which were used in prior models are eliminated. In addition, the CR flexible cable is soldered to the print head cable on the print head side.) In replacing the
  • Canon PIXMA iP1500 | Service Manual - Page 14
    sheet is packaged together with the printer, the user may not have noticed it. Note: Even if the packing material remains, no parts are damaged. 2 A Ink tank installation error - LED blinks in orange 4 times (ink Open the access cover, and install the ink Since the user did not seat the
  • Canon PIXMA iP1500 | Service Manual - Page 15
    backside, or 1. Perform Bottom Plate cleaning from When borderless printing is conducted address side of postcards - Smears on the already printed side the printer driver. continuously, ink mist attaches to the ribs when printing the other side 2. Clean the ribs
  • Canon PIXMA iP1500 | Service Manual - Page 16
    - Ink mist on the platen. -> Perform Bottom Plate cleaning, and clean the ribs on the platen. (2) No paper selection lever The printer does not need adjustment via a paper selection lever. (Adjustment of the head-to-paper distance when printing envelopes is not necessary.)
  • Canon PIXMA iP1500 | Service Manual - Page 17
    from the printer driver's Maintenance. - Excessive ink consumption when conducting print head deep cleaning repeatedly. (The amount of ink used is approx. 10 to 15 times the normal manual cleaning amount.) Cleaning types, amount of ink used, and
  • Canon PIXMA iP1500 | Service Manual - Page 18
    . (At initial set-up by the user, notice to perform the print head alignment is displayed in the Status Monitor.) - The line is not straight. -> Perform print head alignment from the printer driver. - Printout is granulated. -> Disable the Quiet mode. ( 18 / 21
  • Canon PIXMA iP1500 | Service Manual - Page 19
    lines) Paper size: A4 Model name ROM version Main ink absorber waste ink amount (%) IP1500 P=V X.XX D=XXXXX.X Page=XXXX PL=XXXX ,HR=XXXX ,GP=XXXX ,CA=XXXX ,BL=XXXX SettingTime=XXXX / XX / XX XX:XX YY YY YY YY USB= (YYYYYY) Installation time ( 19 / 21 ) Number of sheets
  • Canon PIXMA iP1500 | Service Manual - Page 20
    TOOL Usage:Shipment inspection pattern printing/Destination setting in EEPROM/EEPROM reset Supported OS:Windows 98 / ME / 2000 / XP (J/E version) : QY9-0066 Distribution method:Provided by SSIS (Download "iP1500 Service Tool" from software download
  • Canon PIXMA iP1500 | Service Manual - Page 21
    In CLEAR WASTE INK COUNTER (G), select MAIN or PLATEN. The selected waste ink counter will be reset. MAIN resets the main waste ink counter. PLATEN resets the platen waste ink counter. If both the main and platen waste ink absorbers are replaced, reset both the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
PIXMA iP1500
SERVICE
MANUAL
Canon
Copyright 2004, Canon U.S.A. This technical publication is the proprietary and confidential information of Canon U.S.A. which
shall be retained for reference purposes by Authorized Service Facilities of Canon U.S.A. Its unauthorized use is prohibited.