Canon PIXMA iP5200 Service Manual - Page 31

See 3, Verification Items, 1 Service, test print., Verification Items, 2 EEPROM, information print

Get Canon PIXMA iP5200 PDF manuals and user guides View all Canon PIXMA iP5200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Note: At the end of the service mode, press the Power button. To protect the media sensor from being dislocated during transportation, the paper lifting plate of the sheet feeder unit will be raised. 1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.) 2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.) 3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.) 4) When the Power LED lights in green, press the Resume/Cancel button the specified number of time (s) according to the function listed in the table below. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.) Time(s) 0 times 1 time 2 times 3 times 4 times 5 times 6 times 7 times 8 times 9 times 10 times 11 to 13 times 14 times LED indication Function Remarks Green (Power) Power off When the print head is not installed, the carriage returns and locks in the home position capped. Orange (Alarm) Service test print See 3-4. Verification Items, (1) Service test print. Green (Power) EEPROM information See 3-4. Verification Items, (2) EEPROM print information print. Orange (Alarm) EEPROM initialization Green (Power) Waste ink counter resetting Orange (Alarm) Destination settings After entering the destination settings mode, press the Resume/Cancel button the specified number of time(s) to select the destination. For detail, see "Destination settings procedures" below. Green (Power) Print head deep cleaning (Cleaning of both black and color) Orange (Alarm) LF correction Green (Power) CD / DVD check pattern print Not used in servicing. Orange (Alarm) CD / DVD print position correction (horizontal: X direction) Not used in servicing. Green (Power) CD / DVD print position correction Not used in servicing. (vertical: Y direction) Orange, Green, Return to the menu Orange selection (Alarm, Power, Alarm) Green (Power) Left margin correction Not used in servicing. 1-26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Note:
At the end of the service mode, press the Power button. To protect the media sensor from being
dislocated during transportation, the paper lifting plate of the sheet feeder unit will be raised.
<Service mode operation procedures>
1)
With the printer power turned off, while pressing the Resume/Cancel button, press and hold the
Power button. (DO NOT release the buttons. The Power LED lights in green to indicate that a
function is selectable.)
2)
While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power
button.)
3)
While holding the Power button, press the Resume/Cancel button 2 times, and then release both the
Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and
Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)
4)
When the Power LED lights in green, press the Resume/Cancel button the specified number of time
(s) according to the function listed in the table below. (Each time the Resume/Cancel button is
pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting
with Alarm LED.)
Time(s)
LED indication
Function
Remarks
0 times
Green (Power)
Power off
When the print head is not installed, the
carriage returns and locks in the home
position capped.
1 time
Orange (Alarm)
Service test print
See 3
-
4. Verification Items, (1) Service
test print.
2 times
Green (Power)
EEPROM information
print
See 3
-
4. Verification Items, (2) EEPROM
information print.
3 times
Orange (Alarm)
EEPROM initialization
4 times
Green (Power)
Waste ink counter
resetting
5 times
Orange (Alarm)
Destination settings
After entering the destination settings
mode, press the Resume/Cancel button
the specified number of time(s) to select
the destination. For detail, see
"Destination settings procedures" below.
6 times
Green (Power)
Print head deep
cleaning
(Cleaning of both black and color)
7 times
Orange (Alarm)
LF correction
8 times
Green (Power)
CD / DVD check
pattern print
Not used in servicing.
9 times
Orange (Alarm)
CD / DVD print
position correction
(horizontal:
X
direction)
Not used in servicing.
10 times
Green (Power)
CD / DVD print
position correction
(vertical:
Y direction)
Not used in servicing.
11 to 13
times
Orange, Green,
Orange
(Alarm, Power,
Alarm)
Return to the menu
selection
14 times
Green (Power)
Left margin correction
Not used in servicing.
1-26