Canon PIXMA iP5200 Service Manual - Page 48
Temporary, operational, solution, Cleaning by, Service
View all Canon PIXMA iP5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Soiling on the - After continuous In borderless 1. Perform - Paper gets back side of borderless printing, printing Bottom plate smeared. paper (lines or printing of small is performed to cleaning (from - The back streaks parallel sized paper the size slightly the printer side of to the paper (such as 4 x 6), larger than the driver) up to 3 paper gets feed direction) when a larger paper size, and times*1. smeared. 4 A Print results sized paper ink off the paper (such as A4) is is absorbed by printed. the platen's ink - With Photo absorber. Paper Plus Absorbed ink Double Sided or may attach to the postcards, the platen rib(s) after phenomenon is several dozen likely to be sheets are noticeable and to printed, causing be complained of soiling at the by users, as leading edge of 2. If soiling on the paper still remains after 3 times of Bottom plate cleaning, wipe the platen rib (s) and their surroundings with a cotton swab. printing is paper or on the performed on back side of both sides of paper. such paper. Soiling on - Automatic duplex On the rib(s) Temporary - Paper gets paper in printing (Photo inside the sheet operational smeared. automatic duplex printing (lines or streaks perpendicular to the paper feed direction) Paper Plus Double Sided, postcards, plain paper) feed unit used for solution: - The back duplex printing, Cancel automatic side of ink mist may duplex printing, paper gets accumulate, and manually smeared. smearing paper. print each side of - Even after paper. Bottom plate cleaning Cleaning by was user: performed, 1. Perform Bottom plate cleaning (from the printer driver) up to 3 times*1. and the platen ribs were cleaned with cotton swab, paper gets smeared. 2. If soiling on 5 B Print results the paper still remains after 3 times of Bottom plate cleaning, wipe the platen rib (s) and their surroundings with a cotton swab. If the phenomenon persists after conducting 1 and 2, servicing is required. Service: Wipe any soiling or dirt off from the sheet feed unit 2-8