Canon PIXMA iX6520 iX6520 series Getting Started - Page 11

Presione firmemente la marca

Page 11 highlights

3 4 5 C D Hold the ink tank by its sides and slowly twist the orange protective cap 90 degrees horizontally to remove it off. Do not push the sides of the ink tank. • Do not touch the inside (C) of the orange protective cap or the open ink port (D). The ink may stain your hands if you touch them. Tilt the ink tank, then insert it under the label and against the back end of the slot. Make sure that the color of the label matches the ink tank. Press the PUSH mark on the ink tank firmly until it clicks. When the installation is completed properly, the Ink lamp lights red. Sujete el depósito de tinta por los laterales y gire lentamente la tapa protectora naranja 90 grados en horizontal para retirarla. No apriete los laterales del depósito de tinta. • No toque el interior (C) de la tapa protectora naranja ni la salida de tinta abierta (D). Si los toca, podría mancharse las manos de tinta. Incline el depósito de tinta y, a continuación, introdúzcalo bajo la etiqueta y contra la parte trasera de la ranura. Asegúrese de que el color de la etiqueta coincide con el del depósito de tinta. Presione firmemente la marca PUSH del depósito de tinta hasta que haga clic en su lugar. Cuando la instalación finaliza correctamente, la lámpara de tinta (Ink) se ilumina de color rojo. 

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

4
3
C
D
5
¸
No toque el interior (C) de la tapa protectora naranja ni la salida de tinta abierta (D). Si los
toca, podría mancharse las manos de tinta.
Sujete el depósito de tinta por los laterales y gire lentamente la tapa protectora
naranja 90 grados en horizontal para retirarla.
No apriete los laterales del depósito de tinta.
Incline el depósito de tinta y, a
continuación, introdúzcalo bajo la
etiqueta y contra la parte trasera de la
ranura.
Asegúrese de que el color de la etiqueta
coincide con el del depósito de tinta.
Presione firmemente la marca
PUSH
del depósito de tinta hasta que haga
clic en su lugar.
Cuando la instalación finaliza correctamente, la
lámpara de
tinta (Ink)
se ilumina de color rojo.
Do not touch the inside (C) of the orange protective cap or the open ink port (D). The ink may
stain your hands if you touch them.
Hold the ink tank by its sides and slowly twist the orange protective cap 90
degrees horizontally to remove it off.
Do not push the sides of the ink tank.
Tilt the ink tank, then insert it under the
label and against the back end of the
slot.
Make sure that the color of the label matches
the ink tank.
Press the
PUSH
mark on the ink tank
firmly until it clicks.
When the installation is completed properly, the
Ink
lamp lights red.